Daewoo Musso. Manual — part 212
2D-6 REAR SUSPENSION
Removal & Installation Procedure
l
Stabilizer bar
1. Remove the upper nut of the connecting link.
Installation Notice
2. Remove the stabilizer bar cap fixing bolts (arrow) and
remove the stabilizer bar.
Installation Notice
Tightening Torque
16 - 22 Nm
Distance Between the Nut
end and the Screw end
10 - 13 mm
Tightening Torque
30 - 45 Nm
l
Lateral Rod
1. Remove the lateral rod fixing nut from the frame.
Notice
Completely press the coil springs.
Installation Notice
2. Remove the lateral rod fixing nut from the rear axle and
remove the lateral rod.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
REAR SUSPENSION 2D-7
l
Shock Absorber.
1. Remove the lower mounting nut.
Installation Notice
2. Remove the upper mounting nut and remove the shock
absorber.
Installation Notice
Tightening Torque
50 - 65 Nm
l
Upper Arm
1. Remove the upper arm fixing nut from the frame.
Installation Notice
2. Remove the upper arm fixing nut from the rear axle and
remove the upper arm.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
l
Lower arm
1. Remove the parking brake cable bracket.
Tightening Torque
30 - 45 Nm
Distance between the nut
end and the screw end
6 - 9 mm
2D-8 REAR SUSPENSION
2. Remove the lower arm fixing nut from the frame.
Installation Notice
3. Remove the lower arm fixing nut from the rear axle and
remove the lower arm.
Installation Notice
Tightening Torque
150 - 180 Nm
Tightening Torque
150 - 180 Nm
REAR SUSPENSION 2D-9
REAR SHOCK ABSORBER
1 Rear Shock Absorber
2 Washer
3 Bush
4 Center Washer
5 Actuator Mounting Bracket
6 Nut (M12 x 1.25) . . . . . . . . . 40 - 60Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст