Hyundai Sonata (2022 year). Manual in english — page 11
06
AUtoMAtic trAnSMiSSion
ODN8069005
Automatic Transmission Operation
The automatic transmission has eight forward speeds and one reverse speed.
The individual speeds are selected automatically in the D (Drive) position.
WARNING
The automatic transmission shift button or interior parts might get hot when a
vehicle is parked outside during hot weather. Always be careful when the vehicle is
hot.
6-13
While Driving
Transmission ranges
R (Reverse)
The indicator in the instrument cluster
Use this position to drive the vehicle
displays the gear position when the
backward.
ignition switch is in the ON position.
NOTICE
Always come to a complete stop before
WARNING
shifting into or out of R (Reverse); you
To reduce the risk of serious injury or
may damage the transmission if you
death:
shift into R (Reverse) while the vehicle is
in motion.
• ALWAYS check the surrounding
areas near your vehicle for people,
especially children, before shifting a
When the vehicle is stopped in
vehicle into D (Drive) or R (Reverse).
R (Reverse) position, if you open
• Before leaving the driver’s seat,
the driver's door with the seat belt
always make sure the gear is in
unfastened, the gear is shifted to P (Park)
the P (Park) position, then set
position automatically.
the parking brake, and place the
However when the vehicle moves
ignition switch in the LOCK/OFF
in R (Reverse) position, if you open
position. Unexpected and sudden
the driver's door with the seat belt
vehicle movement can occur if these
unfastened, the gear may be not shifted
precautions are not followed.
to P (Park) position automatically for
• If equipped, do not use the engine
protecting the automatic transmission.
brake (shifting from a high gear to
lower gear using the paddle shifters)
N (Neutral)
rapidly on slippery roads.
The wheels and transmission are not
engaged.
P (Park)
Use N (Neutral) if you need to restart a
Always come to a complete stop before
stalled engine, or if it is necessary to stop
shifting into P (Park).
with the engine ON. Shift into P (Park)
To shift from P (Park), you must depress
if you need to leave your vehicle for any
firmly on the brake pedal and make sure
reason.
your foot is off the accelerator pedal.
Always depress the brake pedal when
The gear must be in P (Park) before
you are shifting from N (Neutral) to
turning the engine off.
another gear.
WARNING
WARNING
• Shifting into P (Park) while the
Do not shift into gear unless your foot is
vehicle is in motion may cause you to
firmly on the brake pedal. Shifting into
lose control of the vehicle.
gear when the engine is running at high
• After the vehicle has stopped, always
speed can cause the vehicle to move
make sure the gear is in P (Park),
very rapidly. You could lose control of
apply the parking brake, and turn
the vehicle and hit people or objects.
the engine off.
• Do not use the P (Park) position in
place of the parking brake.
6-14
06
D (Drive)
Stay in N (Neutral) position when
This is the normal driving position. The
engine is Off
transmission will automatically shift
through a 8-gear sequence, providing
the best fuel economy and power.
To start the vehicle forward, push the D
(Drive) button by depressing the brake
pedal with the engine ON. Then depress
the accelerator pedal smoothly.
For extra power when passing another
vehicle or driving uphill, depress the
accelerator fully. The transmission will
automatically downshift to the next
ODN8069006
lower gear (or gears, as appropriate).
When the vehicle is stopped in D (Drive)
position, if you open the driver's door
with the seat belt unfastened, the gear is
shifted to P (Park) position automatically.
However when the vehicle moves in D
(Drive) position, if you open the driver's
door with the seat belt unfastened, the
gear may not shift to P (Park) position
automatically to protect the automatic
transmission.
ODN8069008
If you want to keep the N (Neutral)
Shift-lock system
position after the engine is OFF, do the
following.
For your safety, the automatic
transmission has a shift-lock system
1. Deactivate the AUTO HOLD and
which prevents shifting the gear from
release the parking brake when the
P (Park) or N (Neutral) to R (Reverse)
ignition switch is ON.
or D (Drive) unless the brake pedal is
2. Start the engine. Push the N (neutral)
depressed.
button while depressing the brake
To shift the gear from P (Park) or N
pedal. If the message ("Press and
(Neutral) to R (Reverse) or D (Drive):
hold OK button to stay in Neutral
when vehicle is OFF") appears on the
1. Depress and hold the brake pedal.
cluster LCD display, press and hold
2. Start the engine or place the ignition
the OK button on the steering wheel
switch in the ON position.
for more than 1 second.
3. Depress the brake pedal and push the
3. When the message ("Vehicle will
R (Reverse) or D (Drive) button.
stay in (N). Change gear to cancel")
appears on the cluster LCD display,
turn off the engine.
In this situation, if you unfasten the
driver's seat belt and open the driver's
door within 3 minutes, the gear stays in
the N (Neutral) position and the ignition
switch is turned off.
6-15
While Driving
When the battery is discharged:
Parking
You cannot shift the gear when the
Always come to a complete stop and
battery is discharged.
continue to depress the brake pedal.
In emergencies, do the following to
Press the P button, apply the parking
move the shift button to N (Neutral) on a
brake, and place the ignition switch in
level ground.
the LOCK/OFF position. Take the Key
with you when exiting the vehicle.
1. Connect the battery cables from
another vehicle or from a another
• The gear is shifted to P (Park) position
battery to the jump-starting terminals
automatically for safety under the
inside the engine compartment.
following conditions.
For more information refer to "Jump
- When the driver unfastens the seat
Starting" in chapter 7.
belt and opens the driver’s door.
2. Release the parking brake with the
- When the engine is turned off with
Engine Start/Stop button in the ON
the gear shifted to R (Reverse), D
position.
(Drive) or N (Neutral).
3. Shift the gear to the N(Neutral)
WARNING
position. Refer to the "Stay in Neutral
when vehicle is Off" in this chapter.
When you stay in the vehicle with
the engine running, be careful not to
depress the accelerator pedal for a long
period of time. The engine or exhaust
system may overheat and start a fire.
The exhaust gas and the exhaust system
are very hot. Keep away from the
exhaust system components.
Do not stop or park over flammable
materials, such as dry grass, paper or
leaves. They may ignite and cause a fire.
6-16
06
LCD Display Message
Vehicle will stay in (N). Change gear
to cancel
Shifting conditions not met
The warning message appears on the
The warning message appears on the
LCD display, when depressing the "OK"
LCD display, when engine RPM is too
button on the steering wheel after the
high, or when driving speed is too fast to
message ("Press and hold OK button
shift the gear.
to stay in Neutral when vehicle is Off")
appears on the cluster LCD display. The
We recommend you decrease the engine
gear stays in N(Neutral) position after
speed or slow down before shifting the
turning off the engine.
gear.
NEUTRAL engaged
Press brake pedal to change gear
The message appears on the LCD
The warning message appears on the
display, when the N (Neutral) position is
LCD display, when the brake pedal is not
engaged.
depressed while shifting the gear.
We recommend you to depress the brake
Gear already selected
pedal and then shift the gear.
The message appears on the LCD
display, when pushing the current shift
Shift to P after stopping
button again.
The warning message appears on the
LCD display, when the gear is shifted to P
Shift button held down
(Park) while the vehicle is moving.
The warning message appears on the
Stop the vehicle before shifting to P
LCD display, when the shift button is
(Park).
pressed continuously or the shift button
does not properly operate. Clean the
PARK engaged
surroundings of gear shift button.
The message appears on the LCD display
If this message appears again, have
when the P (Park) position is engaged.
the vehicle inspected by an authorized
Stop the vehicle before shifting to P
HYUNDAI dealer.
(Park).
Shifter system malfunction
Press and hold OK button to stay in
The warning message appears on the
Neutral when vehicle is Off
LCD display, when the transmission
The warning message appears on
or the shift button does not properly
the LCD display, when pushing the N
operate in the P (Park) position.
(Neutral) button. If you want to stay N
In this case, have the vehicle inspected
(Neutral) after turning off the engine,
by an authorized HYUNDAI dealer.
press and hold the “OK” button on the
steering wheel more than 1 second.
Check shift controls
The warning message appears on the
LCD display, when there is a malfunction
with transmission shift button.
In this case, have the vehicle inspected
by an authorized HYUNDAI dealer.
6-17
While Driving
Good Driving Practices
• Optimum vehicle performance and
economy is obtained by smoothly
•
Never shift the gear from P (Park) or
depressing and releasing the
N (Neutral) to any other position with
accelerator.
the accelerator pedal depressed.
•
Never shift the gear into P (Park) when
WARNING
the vehicle is in motion.
To reduce the risk of SERIOUS INJURY
Be sure the vehicle is completely
or DEATH:
stopped before you attempt to shift
•
ALWAYS wear your seatbelt. In a
into R (Reverse) or D (Drive).
collision, an unbelted occupant
•
Do not shift the gear to N (Neutral)
is significantly more likely to be
when driving. Doing so may result
seriously injured or killed than a
in an accident because of a loss of
properly belted occupant.
engine braking and the transmission
could be damaged.
•
Avoid high speeds when cornering or
turning.
•
While driving up or downhill, check
the gear position, indicated on the
•
Do not make quick steering wheel
cluster, to ensure the vehicle is
movements, such as sharp lane
driving forward while in D (Drive), or
changes or fast, sharp turns.
backward while in R (Reverse). If you
•
The risk of rollover is greatly
drive in the opposite direction of the
increased if you lose control of your
selected gear, the engine will turn off
vehicle at highway speeds.
and a serious accident may occur due
•
Loss of control often occurs if two or
to the degraded brake performance.
more wheels drop off the roadway
•
Do not drive with your foot resting
and the driver over steers to reenter
on the brake pedal. Even light, but
the roadway.
consistent pedal pressure can result
•
In the event your vehicle leaves
in the brakes overheating, brake wear
the roadway, do not steer sharply.
and possibly even brake failure.
Instead, slow down before pulling
•
When driving in the manual shift
back into the travel lanes.
mode, slow down before shifting to a
•
HYUNDAI recommends you follow all
lower gear. Otherwise, the lower gear
posted speed limits.
may not be engaged if the engine
rpms are outside of the allowable
range.
Information
•
Always apply the parking brake when
Kickdown Mechanism (if equipped)
leaving the vehicle. Do not depend on
If you depress the accelerator pedal
placing the transmission in P (Park) to
equipped with Kickdown device beyond
keep the vehicle from moving.
the pressure point, it maximizes the engine
•
Exercise extreme caution when
power. You may feel when the Kickdown
driving on a slippery surface. Be
equipment starts to work and hear the
especially careful when braking,
sound of Kickdown operation. It is normal
accelerating or shifting gears. On a
operation, not a failure.
slippery surface, an abrupt change
in vehicle speed can cause the drive
wheels to lose traction and may cause
loss of vehicle control resulting in an
accident
6-18
06
Paddle Shifter
(Manual Shift Mode)
(if equipped)
ODN8069009
The paddle shifter is available when the
gear is in the D (Drive) position.
Pull the [+] or [-] paddle shifter once to
shift up or down one gear and the system
changes from automatic shift mode to
manual shift mode.
To change back to the automatic shift
mode from manual shift mode, do one of
the following:
• Gently depress the accelerator pedal
for more than 5 seconds.
• Drive the vehicle under 10 km/h (6
mph).
• Pull and hold the right side paddle
shifter.
Information
If the [+] and [-] paddle shifters are pulled
at the same time, gear shift may not occur.
6-19
While Driving
Dual clutch transmission (if equippeD)
ODN8069005
Dual clutch transmission operation
The dual clutch transmission has eight forward speeds and one reverse speed.
The individual speeds are selected automatically when the shift button is in the D
(Drive) position.
6-20
06
•
The dual clutch transmission can be
•
When rapidly accelerating from a
thought of as an automatically shifting
lower vehicle speed, the engine
manual transmission. It gives the
rpm may increase dramatically as a
driving feel of a manual transmission,
result of clutch slip as the dual clutch
yet provides the ease of a fully
transmission selects the correct gear.
automatic transmission.
This is a normal condition.
•
When D (Drive) is selected, the
•
When accelerating from a stop on
transmission will automatically
an incline, press the accelerator
shift through the gears similar to a
smoothly and gradually to avoid any
conventional automatic transmission.
shudder feeling or jerkiness.
Unlike a traditional automatic
•
When traveling at a lower vehicle
transmission, the gear shifting can
speed, if you release the accelerator
sometimes be felt and heard as the
pedal quickly, you may feel engine
actuators engage the clutches and the
braking before the transmission
gears are selected.
changes gears. This engine braking
•
The dual clutch transmission
feeling is similar to operating a
incorporates a wet-type dual clutch
manual transmission at low speed.
mechanism, which allows for better
•
When driving downhill, you may wish
acceleration performance and
to move the gear shift lever/button to
increased fuel efficiency while driving.
Manual Shift mode and downshift to
But it differs from a conventional
a lower gear in order to control your
automatic transmission because
speed without using the brake pedal
it does not incorporate a torque
excessively.
converter. Instead, the transition from
•
When you turn the engine on and off,
one gear to the next is managed by
you may hear clicking sounds as the
clutch slip, especially at lower speeds.
system goes through a self-test. This
As a result, shifts are sometimes more
is a normal sound for the dual clutch
noticeable, and a light vibration can
transmission.
be felt as the transmission shaft speed
•
During the first 1,500 km (1000 miles),
is matched with the engine shaft
you may feel that the vehicle may not
speed. This is a normal condition of
be smooth when accelerating at low
the dual clutch transmission.
speed. During this break-in period, the
•
The wet-type clutch transfers torque
shift quality and performance of your
more directly and provides a direct-
new vehicle is continuously optimized.
drive feeling which may feel different
from a conventional automatic
transmission. This may be more
noticeable when launching the vehicle
from a stop or when traveling at low,
stop-and-go vehicle speeds.
6-21
While Driving
DCT warning messages
WARNING
This warning message is displayed when
To reduce the risk of serious injury or
vehicle is driven slowly on a grade and
death:
the vehicle detects that the brake pedal
• ALWAYS check the surrounding
is not applied.
areas near your vehicle for people,
especially children, before shifting a
vehicle into D (Drive) or R (Reverse).
• Before leaving the driver’s seat,
always make sure the shift lever/
button is in the P (Park) position,
then set the parking brake, and place
the ignition switch in the LOCK/OFF
position. Unexpected and sudden
vehicle movement can occur if these
precautions are not followed.
• Do not use aggressive engine braking
(shifting from a higher gear to a
OOSH069010L
lower gear) on slippery roads. This
Steep grade! Press brake pedal
could cause the tires to slip and may
Driving up hills or on steep grades:
result in an accident.
• To hold the vehicle on an incline use
the foot brake or the parking brake.
NOTICE
• When in stop-and-go traffic on an
• Always come to a complete stop
incline, allow a gap to form ahead
before shifting into D (Drive) or R
of you before moving the vehicle
(Reverse).
forward. Then hold the vehicle on the
• Do not put the shift lever/button in N
incline with the foot brake.
(Neutral) while driving.
• If the vehicle is held or creeping
forward on an incline by applying
the accelerator pedal, the clutch and
WARNING
transmission may overheat which
Due to transmission failure, you may
can result in damage. At this time, a
not continue to drive and the position
warning message will appear on the
indicator and the position indicator (D,
LCD display.
P) on the instrument cluster will blink.
• If the LCD warning is active, the foot
We recommend that you contact an
brake must be applied.
authorized HYUNDAI dealer and have
• Ignoring the warnings can lead to
the system checked.
damage to the transmission.
6-22
06
Type A
Type B
OOSH069012L
OOSH069007L
OOSH069013L
Transmission high temperature
•
Under certain conditions, such as
repeated stop-and-go launches
on steep grades, sudden take off
or acceleration, or other harsh
driving conditions, the transmission
clutch temperatures will increase
excessively.
•
When the clutch temperatures are too
high, the “Transmission temp. is high!
Stop safely” warning message will
OOSH069014L
appear on the LCD display, a chime
will sound, and the transmission
Transmission overheated
shifting may not be smooth.
• If the vehicle continues to be driven
•
If this occurs, pull over to a safe
and the clutch temperatures reach
location, stop the vehicle with the
the maximum temperature limit, the
engine running, apply the brakes and
“Transmission Hot! Park with engine
shift the vehicle to P (Park), and allow
on” warning will be displayed. When
the transmission to cool.
this occurs the clutch is disabled
until the clutch cools to normal
•
If you ignore this warning, the driving
temperatures.
condition may become worse.
You may experience abrupt shifts,
• The warning will display a time to wait
frequent shifts, or jerkiness.
for the transmission to cool.
•
When the message “Trans cooled.
• If this occurs, pull over to a safe
Resume driving.” appears you can
location, stop the vehicle with the
continue to drive your vehicle.
engine running, apply the brakes and
shift the vehicle to P (Park), and allow
•
When possible, drive the vehicle
the transmission to cool.
smoothly.
6-23
While Driving
• When the message “Trans cooled.
R (Reverse)
Resume driving.” appears you can
Use this position to drive the vehicle
continue to drive your vehicle.
backward.
• When possible, drive the vehicle
smoothly.
NOTICE
Always come to a complete stop before
If any of the warning messages in the
shifting into or out of R (Reverse); you
LCD display continue to blink, for your
may damage the transmission if you
safety, we recommend that you contact
shift into R (Reverse) while the vehicle is
an authorized HYUNDAI dealer and have
in motion.
the system checked.
Transmission ranges
When the vehicle is stopped in
R (Reverse) position, if you open
The indicator in the instrument cluster
the driver’s door with the seat belt
displays the shift lever⁄button position
unfastened, the gear is shifted to P (Park)
when the ignition switch is in the ON
position automatically.
position.
However when the vehicle moves
in R (Reverse) position, if you open
P (Park)
the driver’s door with the seat belt
Always come to a complete stop before
unfastened, the gear may be not shifted
shifting into P (Park).
to P (Park) position automatically for
To shift from P (Park), you must depress
protecting the dual clutch transmission.
firmly on the brake pedal and make sure
your foot is off the accelerator pedal.
N (Neutral)
The shift lever/button must be in P (Park)
The wheels and transmission are not
before turning the engine off.
engaged.
Use N (Neutral) if you need to restart a
stalled engine, or if it is necessary to stop
WARNING
with the engine ON. Shift into P (Park)
• Shifting into P (Park) while the
if you need to leave your vehicle for any
vehicle is in motion may cause you to
reason.
lose control of the vehicle.
Always depress the brake pedal when
• After the vehicle has stopped, always
you are shifting from N (Neutral) to
make sure the shift lever/button is in
another gear.
P (Park), apply the parking brake, and
turn the engine off.
• When parking on an incline, place
the shift lever/button in P (Park) and
apply the parking brake to prevent
the vehicle from rolling downhill.
• For safety, always engage the
parking brake with the shift lever/
button in the P (Park) position except
for the case of emergency parking.
6-24
06
If you want to stay in N (Neutral) after the
WARNING
engine is OFF (in the ACC state), do the
Do not shift into gear unless your foot is
following.
firmly on the brake pedal. Shifting into
1. Turn off Auto Hold and release
gear when the engine is running at high
Electronic Parking Brake when the
speed can cause the vehicle to move
engine is running.
very rapidly. You could lose control of
the vehicle and hit people or objects.
2. Push the N(Neutral) button by
depressing the brake pedal. If the
message (“Press and hold the OK
To stay in N (Neutral) when vehicle is
button on the steering wheel to stay in
OFF (button type)
Neutral ”) appears on the cluster LCD
display, press and hold the OK button
on the steering wheel for more than 1
second.
3. When the message ‘Vehicle will stay in
(N). Change gear to cancel’ (or ‘N will
stay engaged when the vehicle is Off’)
will appear on the cluster LCD display,
press the Engine Start/Stop button
while depressing the brake pedal.
However, if you open the driver's
door, the gear will automatically
ODN8069006
shift to P (Park) and the Engine Start/
Type A
Stop button will change to the OFF
position.
NOTICE
With the gear in N (Neutral) the Engine
Start/Stop button will be in the ACC
position. Note that the doors cannot
be locked in the ACC position or the
battery may discharge if left in the ACC
position for a long period.
ODN8069007
Type B
ODN8069008
6-25
While Driving
D (Drive)
Shift-lock system
This is the normal driving position. The
For your safety, the automatic
transmission will automatically shift
transmission has a shift-lock system
through a 8-gear sequence, providing
which prevents shifting the transmission
the best fuel economy and power.
from P (Park) or N (Neutral) to R
To start the vehicle forward, push the D
(Reverse) or D (Drive) unless the brake
(Drive) button by depressing the brake
pedal is depressed.
pedal with the engine ON. Then depress
To shift the transmission from P (Park)
the accelerator pedal smoothly. For extra
into R (Reverse):
power when passing another vehicle or
1. Depress and hold the brake pedal.
driving uphill, depress the accelerator
fully. The transmission will automatically
2. Start the engine or place the ignition
switch in the ON position.
downshift to the next lower gear (or
gears, as appropriate). When the vehicle
3. Depress the brake pedal and move the
is stopped in D (Drive) position, if you
shift lever to R (Reverse). (shift lever
open the driver’s door with the seat belt
type)
unfastened, the gear is shifted to P (Park)
Depress the brake pedal and push the
position automatically.
R (Reverse) button. (shift button type)
However when the vehicle moves in D
(Drive) position, if you open the driver’s
When the battery is discharged:
door with the seat belt unfastened,
You cannot shift the shift lever/button,
the gear may be not shifted to P (Park)
when the battery is discharged.
position automatically for protecting the
In emergencies, do the following
dual clutch transmission.
to move the shift lever/button to N
The DRIVE MODE switch, located on
(Neutral) on a level ground.
the shift lever/button console, allows
1. Connect the battery cables from
the driver to switch from NORMAL/
another vehicle or from a another
COMFORT mode to SPORT or ECO mode.
battery to the jump-starting terminals
(if equipped)
inside the engine compartment.
For more details, refer to “Drive Mode
For more details, refer to “Jump
Integrated Control System” later in this
Starting” in chapter 8.
chapter.
2. Release the parking brake with the
ignition switch in the ON position.
3. Shift the gear to the N(Neutral)
position refer to the “Stay in Neutral
when vehicle is Off” in this chapter.
6-26
06
Parking
LCD display message (button
Always come to a complete stop and
type)
continue to depress the brake pedal.
Shifting conditions not met. Reduce
Move the shift lever/button into the P
speed, then shift
(Park) position, apply the parking brake,
The warning message appears on the
and place the ignition switch in the
LCD display, when engine RPM is too
LOCK/OFF position. Take the Key with
high, or when driving speed is too fast to
you when exiting the vehicle.
shift the gear.
We recommend you decrease the engine
WARNING
speed or slow down before shifting the
gear.
When you stay in the vehicle with
the engine running, be careful not to
Press brake pedal to change gear
depress the accelerator pedal for a long
period of time. The engine or exhaust
The warning message appears on the
system may overheat and start a fire.
LCD display, when the brake pedal is not
depressed while shifting the gear.
The exhaust gas and the exhaust system
are very hot. Keep away from the
We recommend you to depress the brake
exhaust system components.
pedal and then shift the gear.
Do not stop or park over flammable
materials, such as dry grass, paper or
Shift to P after stopping
leaves. They may ignite and cause a fire.
The warning message appears on the
LCD display, when the gear is shifted to P
(Park) while the vehicle is moving.
Stop the vehicle before shifting to P
(Park).
PARK engaged
The warning message appears on the
LCD display, when the gear is shifted to P
(Park) while the vehicle is moving.
Stop the vehicle before shifting to P
(Park).
6-27
While Driving
Press and hold the OK button on the
Shift button held down
steering wheel to stay in Neutral
The warning message appears on the
The warning message appears on
LCD display, when the shift button is
the LCD display, when pushing the
pressed continuously or the shift button
N(Neutral) button. If you want to stay
does not properly operate. Clean the
N(Neutral) after turning off the engine,
surroundings of gear shift button.
press and hold the “OK” button on the
If this message appears again, we
steering wheel more than 1 second.
recommend you to have the vehicle
inspected by an authorized HYUNDAI
Vehicle will stay in (N). Change gear
dealer.
to cancel
The warning message appears on the
Shifter system malfunction! Service
LCD display, when pushing the “OK”
immediately
button on the steering wheel after the
The warning message appears on the
message (“Press and hold OK button
LCD display, when the transmission
to stay in Neutral when vehicle is Off”)
or the shift button does not properly
appears on the cluster LCD display. The
operate in the P (Park) position.
gear stays in N(Neutral) position after
In this case, we recommend you to
turning off the engine.
immediately have the vehicle inspected
by an authorized HYUNDAI dealer.
NEUTRAL engaged
The message appears on the LCD
Check shift controls
display, when the N (Neutral) position is
The warning message appears on the
engaged.
LCD display, when there is a malfunction
with transmission shift button.
Gear already selected
In this case, we recommend you to
The message appears on the LCD
immediately have the vehicle inspected
display, when pushing the current shift
by an authorized HYUNDAI dealer.
button again.
6-28
06
Good driving practices
WARNING
•
Never move the shift lever/button
To reduce the risk of SERIOUS INJURY
from P (Park) or N (Neutral) to any
or DEATH:
other position with the accelerator
•
ALWAYS wear your seatbelt. In a
pedal depressed.
collision, an unbelted occupant
•
Never move the shift lever/button into
is significantly more likely to be
P (Park) when the vehicle is in motion.
seriously injured or killed than a
Be sure the vehicle is completely
properly belted occupant.
stopped before you attempt to shift
•
Avoid high speeds when cornering or
into R (Reverse) or D (Drive).
turning.
•
Do not move the shift lever/button
•
Do not make quick steering wheel
to N (Neutral) when driving. Doing
movements, such as sharp lane
so may result in an accident because
changes or fast, sharp turns.
of a loss of engine braking and the
•
The risk of rollover is greatly
transmission could be damaged.
increased if you lose control of your
•
Do not drive with your foot resting
vehicle at highway speeds.
on the brake pedal. Even light, but
•
Loss of control often occurs if two or
consistent pedal pressure can result
more wheels drop off the roadway
in the brakes overheating, brake wear
and the driver over steers to reenter
and possibly even brake failure.
the roadway.
•
Always apply the parking brake when
•
In the event your vehicle leaves
leaving the vehicle. Do not depend on
the roadway, do not steer sharply.
placing the transmission in P (Park) to
Instead, slow down before pulling
keep the vehicle from moving.
back into the travel lanes.
•
Exercise extreme caution when
•
HYUNDAI recommends you follow all
driving on a slippery surface. Be
posted speed limits.
especially careful when braking,
accelerating or shifting gears. On a
slippery surface, an abrupt change
in vehicle speed can cause the drive
wheels to lose traction and may cause
loss of vehicle control resulting in an
accident.
•
Optimum vehicle performance and
economy is obtained by smoothly
depressing and releasing the
accelerator.
6-29
While Driving
BrAke SySteM
Power Brakes
• Wet brakes may impair the vehicle's
ability to safely slow down; the
Your vehicle has power-assisted brakes
vehicle may also pull to one side
that adjust automatically through normal
when the brakes are applied.
usage.
Applying the brakes lightly will
If the engine is not running or is turned
indicate whether they have been
off while driving, the power assist for
affected in this way. Always test your
the brakes will not work. You can still
brakes in this fashion after driving
stop your vehicle by applying greater
through deep water. To dry the
force to the brake pedal than typical.
brakes, lightly tap the brake pedal to
The stopping distance, however, will be
heat up the brakes while maintaining
longer than with power brakes.
a safe forward speed until brake
When the engine is not running, the
performance returns to normal.
reserve brake power is partially depleted
Avoid driving at high speeds until the
each time the brake pedal is applied.
brakes function correctly.
Do not pump the brake pedal when the
power assist has been interrupted.
Disc Brakes Wear Indicator
Only pump the brakes on slippery
When your brake pads are worn and new
surfaces if the power assist has been
pads are required, you will hear a high
interrupted to maintain steering control.
pitched warning sound from your front
Do not pump the brakes on slippery
or rear brakes. You may hear this sound
surfaces if the brakes are operating
come and go or it may occur whenever
normally.
you depress the brake pedal.
Note that some driving conditions or
climates may cause a brake squeal
WARNING
when you first apply (or lightly apply)
Take the following precautions:
the brakes. This is normal and does not
• Do not drive with your foot resting
indicate a problem with your brakes.
on the brake pedal. This will create
abnormal high brake temperatures,
NOTICE
excessive brake lining and pad wear,
and increased stopping distances.
To avoid costly brake repairs, do not
continue to drive with worn brake pads.
• When descending down a long or
steep hill, move the gear shift button
to Manual Shift Mode and manually
Information
downshift to a lower gear in order
Always replace brake pads as complete
to control your speed without using
front or rear axle sets.
the brake pedal excessively. Applying
the brakes continuously will cause
the brakes to overheat and could
result in a temporary loss of braking
performance.
6-30
06
Electronic Parking Brake (EPB)
Releasing the parking brake
Applying the parking brake
ODN8069013
ODN8069012
To release the EPB (Electronic Parking
Brake):
To apply the EPB
(Electronic Parking Brake):
• Place the ignition switch in the ON
position.
1. Depress the brake pedal.
• Depress and hold the brake pedal.
2. Pull up the EPB switch.
• Press the EPB switch.
Make sure the parking brake
Make sure the Parking Brake Warning
warning light comes on.
Light goes off.
To release EPB (Electronic Parking Brake)
WARNING
automatically:
To reduce the risk of SERIOUS INJURY
• Satisfy the following conditions
or DEATH, do not operate the EPB
1. Ensure seat belts are fastened
while the vehicle is moving except
and the doors, hood and trunk are
in an emergency situation. It could
closed.
damage the brake system and lead to
an accident.
2. With the engine running, depress
the brake pedal and shift out of P
(Park) to R (Reverse), D (Drive) or
Manual shift mode.
3. Depress the accelerator pedal.
Make sure the parking brake warning
light goes off.
6-31
While Driving
EPB (Electronic Parking Brake) may be
• If the driver's seat belt is unfastened
automatically applied when:
and the engine hood or trunk is
opened, a warning will sound and a
• Requested by other systems
message will appear.
• The driver turns the engine off while
• If there is a problem with the vehicle,
Auto Hold is operating.
a warning may sound and a message
• The vehicle is parked on the slope and
may appear.
the Engine Start/Stop button is in the
If the situation occurs, depress the brake
OFF position.
pedal and release EPB by pressing the
• The Engine is turned off when the
EPB switch.
driver tries to park but the vehicle still
moves a bit.
WARNING
Warning messages
•
Whenever leaving the vehicle or
parking, always come to a complete
stop and continue to depress the
brake pedal.
Shift the gear into the P (Park)
position, press the EPB switch, and
set the ignition switch to the OFF
position. Take the Key with you when
exiting the vehicle.
Vehicles not fully engaged in P (Park)
with the parking brake set are at risk
for moving inadvertently and causing
OAEE056115L
injury to yourself or others.
To release EPB, fasten seatbelt, close
•
NEVER allow anyone who is
door, hood and trunk
unfamiliar with the vehicle to touch
• If you try to drive with the EPB
the EPB switch. If the EPB is released
applied, a warning will sound and a
unintentionally, serious injury may
message will appear.
occur.
•
Only release the EPB when you are
seated inside the vehicle with your
foot firmly on the brake pedal.
NOTICE
• Do not apply the accelerator pedal
while the parking brake is engaged.
If you depress the accelerator pedal
with the EPB engaged, a warning will
sound and a message will appear.
Damage to the parking brake may
occur.
• Driving with the parking brake on
can overheat the braking system and
cause premature wear or damage
to brake parts. Make sure the EPB
is released and the Parking Brake
Warning Light is off before driving.
6-32
06
EPB malfunction indicator
Information
• A clicking sound may be heard while
operating or releasing the EPB. These
conditions are normal and indicate that
the EPB is functioning properly.
• When leaving your keys with a parking
attendant or assistant, make sure to
inform him/her how to operate the
EPB.
ODN8069014
This warning light illuminates if the
ignition switch is set to the ON position
and goes off in approximately 3 seconds
if the system is operating normally.
If the EPB malfunction indicator
remains on, comes on while driving, or
does not come on when the ignition
switch is changed to the ON position,
this indicates that the EPB may have
OIK057079N
malfunctioned.
AUTO HOLD turning Off!
If this occurs, have the system checked
Press brake pedal
by an authorized HYUNDAI dealer.
When the conversion from Auto Hold to
The EPB malfunction indicator may
EPB is not working properly a warning
illuminate when the ESC indicator comes
will sound and a message will appear.
on to indicate that the ESC is not working
properly, but it does not indicate a
malfunction of the EPB.
NOTICE
• If the EPB warning light is still on,
have the system checked by an
authorized HYUNDAI dealer.
• If the parking brake warning light
does not illuminate or blinks even
though the EPB switch was pulled
up, the EPB may not be applied.
OIK057077N
• If the parking brake warning light
blinks when the EPB warning light is
Parking brake automatically engaged
on, press the switch, and then pull it
If the EPB is applied while Auto Hold is
up. Repeat this one more time. If the
activated, a warning will sound and a
EPB warning does not go off, have
message will appear.
the system checked by an authorized
HYUNDAI dealer.
6-33
While Driving
Parking brake warning light
NOTICE
Check the parking brake
If you continuously notice a noise or
warning light by placing the
burning smell when the EPB is used
ignition switch to the ON
for emergency braking, have system
position (do not start the
checked by an authorized HYUNDAI
engine).
dealer.
This light will be illuminated when the
parking brake is applied with the ignition
When the EPB (Electronic Parking Brake)
switch in the START or ON position.
does not release
If the parking brake warning light
If the EPB does not release normally,
remains on after the parking brake
contact an authorized HYUNDAI dealer
is released while engine is running,
by loading the vehicle on a flatbed tow
there may be a malfunction in the
truck and have the system checked.
brake system. Immediate attention is
necessary.
Auto Hold
If at all possible, cease driving the vehicle
The Auto Hold maintains the vehicle in a
immediately. If that is not possible,
standstill even though the brake pedal is
use extreme caution while operating
not depressed after the driver brings the
the vehicle and only continue to drive
vehicle to a complete stop by depressing
the vehicle until you can reach a safe
the brake pedal.
location.
To apply :
Emergency braking
If there is a problem with the brake
•
CLUSTER
pedal while driving, emergency braking
is possible by pulling up and holding
the EPB switch. Braking is possible only
while you are holding the EPB switch.
However, braking distance will be longer
than normal.
WARNING
Do not operate the parking brake while
ODN8069015
the vehicle is moving except in an
1. With the driver's door and engine
emergency situation. It could damage
hood closed, depress the brake
the brake system and lead to a severe
pedal and then press the [AUTO
accident.
HOLD] switch. The white AUTO HOLD
indicator will come on and the system
Information
will be in the standby position.
During emergency braking, the parking
brake warning light will illuminate to
indicate that the system is operating.
6-34
06
To cancel :
•
CLUSTER
ODN8069016
2. When you stop the vehicle
ODN8069017
completely by depressing the brake
1. Depress the brake pedal.
pedal, the Auto Hold maintains the
brake pressure to hold the vehicle
2. Press the [AUTO HOLD] switch.
stationary. The indicator changes from
The AUTO HOLD indicator will turn off.
white to green.
3. The vehicle will remain stationary
Information
even if you release the brake pedal.
•
The Auto Hold does not operate when:
4. If EPB is applied, Auto Hold will be
released.
- The driver's door is opened
- The engine hood is opened
To release :
- The gear is in P (Park)
• If you press the accelerator pedal
- The EPB is applied
with the gear in D (Drive), R (Reverse)
or Manual shift mode, the Auto Hold
•
For your safety, the Auto Hold
will be released automatically and the
automatically switches to EPB when:
vehicle will start to move. The AUTO
- The driver's door is opened with the
HOLD indicator changes from green
gear in D (Drive) or N (Neutral)
to white.
- The trunk is opened with the gear in
• If the vehicle is restarted using the
R (Reverse)
cruise control toggle switch (RES+
- The engine hood is opened with the
or SET-) while Auto Hold and cruise
gear in D (Drive) or N (Neutral)
control is operating, the Auto Hold will
- The vehicle stops for more than 10
be released regardless of accelerator
minutes
pedal operation. The AUTO HOLD
indicator changes from green to
- The vehicle stands on a steep slope
white.
- The vehicle moves several times
WARNING
When the AUTO HOLD is automatically
released by depressing the accelerator
pedal, always take a look around your
vehicle.
Slowly depress the accelerator pedal
for a smooth start.
6-35
While Driving
In these cases, the parking brake
Warning messages
warning light comes on, the AUTO
HOLD indicator changes from green
to white, and a warning sound and a
message will appear to inform you that
EPB has been automatically engaged.
Before driving off again, press foot
brake pedal, check the surrounding
area near your vehicle and release
parking brake manually with the EPB
switch.
• While operating Auto Hold, you may
hear mechanical noise. However, it is
OTM058187L
normal operating noise.
Parking brake automatically engaged
When the EPB is applied from Auto Hold,
NOTICE
a warning will sound and a message will
If the AUTO HOLD indicator changes
appear.
to yellow, the Auto Hold is not working
properly. Contact an authorized
HYUNDAI dealer.
WARNING
• Depress the accelerator pedal slowly
when you start the vehicle.
• For your safety, cancel the Auto Hold
when you drive downhill, back up the
vehicle or park the vehicle.
NOTICE
OIK057079N
If there is a malfunction with the
AUTO HOLD turning Off!
driver's door or engine hood open
Press brake pedal
detection system, the Auto Hold may
When the conversion from Auto Hold to
not work properly.
EPB is not working properly a warning
Contact an authorized HYUNDAI dealer.
will sound and a message will appear.
When this message is displayed, the Auto
Hold and EPB may not operate. For your
safety, depress the brake pedal.
6-36
06
Anti-lock Brake System (ABS)
WARNING
An Anti-Lock Braking System (ABS) or
an Electronic Stability Control (ESC)
system will not prevent accidents
due to improper or dangerous driving
maneuvers. Even though vehicle
control is improved during emergency
braking, always maintain a safe
distance between you and objects
OIK057080L
ahead of you. Vehicle speeds should
Press brake pedal to deactivate AUTO
always be reduced during extreme
HOLD
road conditions. The braking distance
If you did not apply the brake pedal when
for cars equipped with ABS or ESC
you release the Auto Hold by pressing
may be longer than for those without
the [AUTO HOLD] switch, a warning will
these systems in the following road
sound and a message will appear.
conditions.
Drive your vehicle at reduced speeds
during the following conditions:
• Rough, gravel or snow-covered
roads.
• On roads where the road surface is
pitted or has different surface height.
The safety features of an ABS or ESC
equipped vehicle should not be tested
by high speed driving or cornering. This
could endanger the safety of yourself or
others.
OTM058159L
ABS is an electronic braking system that
AUTO HOLD conditions not met. Close
helps prevent a braking skid. ABS allows
door and hood.
the driver to steer and brake at the same
When you press the [AUTO HOLD]
time.
switch, if the driver's door and engine
hood are not closed, a warning will
sound and a message will appear on the
cluster LCD display.
Press the [AUTO HOLD] switch after
closing the driver's door and hood.
6-37
While Driving
Using ABS
WARNING
To obtain the maximum benefit from
If the ABS warning light (
) is on and
your ABS in an emergency situation,
stays on, you may have a problem with
do not attempt to modulate your brake
the ABS. Your power brakes will work
pressure and do not try to pump your
normally. To reduce the risk of serious
brakes. Depress your brake pedal as hard
injury or death, contact your HYUNDAI
as possible.
dealer as soon as possible.
When you apply your brakes under
conditions which may lock the wheels,
you may hear sounds from the brakes,
CAUTION
or feel a corresponding sensation in the
When you drive on a road having poor
brake pedal. This is normal and it means
traction, such as an icy road, and apply
your ABS is active.
your brakes continuously, the ABS will
ABS does not reduce the time or distance
be active continuously and the ABS
it takes to stop the vehicle.
warning light (
) may illuminate. Pull
your car over to a safe place and turn
Always maintain a safe distance from the
the engine off.
vehicle in front of you.
Restart the engine. If the ABS warning
ABS will not prevent a skid that results
from sudden changes in direction, such
light is off, then your ABS system is
normal.
as trying to take a corner too fast or
making a sudden lane change. Always
Otherwise, you may have a problem
drive at a safe speed for the road and
with your ABS system. Contact an
weather conditions.
authorized HYUNDAI dealer as soon as
possible.
ABS cannot prevent a loss of stability.
Always steer moderately when braking
hard. Severe or sharp steering wheel
Information
movement can still cause your vehicle to
veer into oncoming traffic or off the road.
When you jump start your vehicle because
of a drained battery, the ABS warning
light (
) may turn on at the same
On loose or uneven road surfaces,
time. This happens because of the low
operation of the anti-lock brake system
battery voltage. It does not mean your
may result in a longer stopping distance
ABS is malfunctioning. Have the battery
than for vehicles equipped with a
recharged before driving the vehicle.
conventional brake system.
The ABS warning light (
) will stay on
for several seconds after the ignition
switch is in the ON position. During
that time, the ABS will go through self-
diagnosis and the light will go off if
everything is normal. If the light stays on,
you may have a problem with your ABS.
Contact an authorized HYUNDAI dealer
as soon as possible.
6-38
06
Electronic Stability Control (ESC)
ESC operation
ESC ON condition
When the ignition switch is in the
ON position, the ESC and the ESC
OFF indicator lights illuminate for
approximately three seconds. After both
lights go off, the ESC is enabled.
When operating
When the ESC is in operation,
the ESC indicator light blinks:
ODN8069018
•
When you apply your brakes under
The Electronic Stability Control (ESC)
system helps to stabilize the vehicle
conditions which may lock the wheels,
you may hear sounds from the brakes,
during cornering maneuvers. ESC checks
where you are steering and where the
or feel a corresponding sensation in
the brake pedal. This is normal and it
vehicle is actually going. ESC applies
braking pressure to any one of the
means your ESC is active.
vehicle's brakes and intervenes in the
•
When the ESC activates, the engine
engine management system to assist the
may not respond to the accelerator as
driver with keeping the vehicle on the
it does under routine conditions.
intended path. It is not a substitute for
•
If the Cruise Control was in use when
safe driving practices. Always adjust your
the ESC activates, the Cruise Control
speed and driving to the road conditions.
automatically disengages. The Cruise
Control can be reengaged when the
road conditions allow. See "Cruise
WARNING
Control System" later in this chapter.
Never drive too fast for the road
(if equipped)
conditions or too quickly when
•
When moving out of the mud or
cornering. The ESC system will not
driving on a slippery road, the engine
prevent accidents.
RPM (revolutions per minute) may
Excessive speed in turns, abrupt
not increase even if you press the
maneuvers, and hydroplaning on wet
accelerator pedal deeply. This is to
surfaces can result in severe accidents.
maintain the stability and traction of
the vehicle and does not indicate a
problem.
6-39
While Driving
ESC OFF condition
Indicator lights
To cancel ESC operation:
■ ESC indicator light (blinks)
• State 1
Press the ESC OFF button briefly. The
ESC OFF indicator light and message
"Traction Control disabled" will
illuminate. In this state, the traction
■ ESC OFF indicator light (comes on)
control function of ESC (engine
management) is disabled, but the
brake control function of ESC (braking
management) still operates.
• State 2
When the ignition switch is placed to
Press and hold the ESC OFF button
the ON position, the ESC indicator light
continuously for more than 3 seconds.
illuminates, then goes off if the ESC
The ESC OFF indicator light and message
system is operating normally.
"Traction and Stability Control disabled"
illuminates and a warning chime sounds.
The ESC indicator light blinks whenever
In this state, both the traction control
the ESC is operating.
function of ESC (engine management)
If ESC indicator light stays on, your
and the brake control function of ESC
vehicle may have a malfunction with
(braking management) are disabled.
the ESC system. When this warning light
If the ignition switch is placed to the
illuminates have your vehicle checked by
LOCK/OFF position when ESC is off, ESC
an authorized HYUNDAI dealer as soon
remains off. Upon restarting the engine,
as possible.
the ESC will automatically turn on again.
The ESC OFF indicator light comes on
when the ESC is turned off.
WARNING
When the ESC is blinking, this indicates
the ESC is active:
Drive slowly and NEVER attempt to
accelerate. NEVER turn the ESC off
while the ESC indicator light is blinking
or you may lose control of the vehicle
resulting in an accident.
NOTICE
Driving with wheels and tires with
different sizes may cause the ESC
system to malfunction. Before replacing
tires, make sure all four tires and wheels
are the same size. Never drive the
vehicle with different sized wheels and
tires installed.
6-40
06
ESC OFF usage
WARNING
When Driving
Take the following precautions when
The ESC OFF mode should only be used
using the Vehicle Stability Management
briefly to help free the vehicle if stuck in
(VSM):
snow by temporarily stopping operation
• ALWAYS check the speed and the
of the ESC to maintain wheel torque.
distance to the vehicle ahead. The
To turn ESC off while driving, press the
VSM is not a substitute for safe
ESC OFF button while driving on a flat
driving practices.
road surface.
• Never drive too fast for the road
conditions. The VSM system will not
NOTICE
prevent accidents. Excessive speed
in bad weather, slippery and uneven
To prevent damage to the transmission:
roads can result in severe accidents.
• Do not allow wheel(s) of one axle to
spin excessively while the ESC, ABS,
VSM operation
and parking brake warning lights
VSM ON condition
are displayed. The repairs would not
be covered by the vehicle warranty.
The VSM operates when:
Reduce engine power and do not
The Electronic Stability Control (ESC) is
spin the wheel(s) excessively while
on.
these lights are displayed.
• When operating the vehicle on
When operating
a dynamometer, make sure the
When you apply your brakes under
ESC is turned off (ESC OFF light
conditions which may activate the ESC,
illuminated).
you may hear sounds from the brakes,
or feel a corresponding sensation in the
brake pedal. This is normal and it means
Information
your VSM is active.
Turning the ESC off does not affect ABS
or standard brake system operation.
NOTICE
Vehicle Stability Management
The VSM does not operate when:
(VSM)
• Driving on a banked road such as
The Vehicle Stability Management (VSM)
gradient or incline.
is a function of the Electronic Stability
• Driving rearward.
Control (ESC) system. It helps ensure the
• ESC OFF indicator light is on.
vehicle stays stable when accelerating
or braking suddenly on wet, slippery and
• EPS (Electric Power Steering)
warning light (
) is on or blinks.
rough roads where traction over the four
tires can suddenly become uneven.
6-41
While Driving
Good Braking Practices
WARNING
If ESC indicator light (
) or EPS
WARNING
warning light (
) stays on or blinks,
your vehicle may have a malfunction
Whenever leaving the vehicle or
with the VSM system. When the
parking, always come to a complete
warning light illuminates, have your
stop and continue to depress the brake
vehicle checked by an authorized
pedal. Move the shift button into P
HYUNDAI dealer as soon as possible.
(Park) position, then apply the parking
brake, and place the ignition switch in
the LOCK/OFF position.
Driving with wheels and tires with
different sizes may cause the ESC system
Vehicles parked with the parking brake
to malfunction. Before replacing tires,
not applied or not fully engaged may
make sure all four tires and wheels are
roll inadvertently and may cause injury
the same size. Never drive the vehicle
to the driver and others. ALWAYS apply
with different sized tires and wheels
the parking brake before exiting the
installed.
vehicle.
Hill-Start Assist Control (HAC)
Wet brakes can be dangerous! The
brakes may get wet if the vehicle is
The Hill-Start Assist Control (HAC)
driven through standing water or if it
helps prevent the vehicle from rolling
is washed. Your vehicle will not stop as
backwards when starting a vehicle from
quickly if the brakes are wet. Wet brakes
a stop on a hill. The system operates the
may cause the vehicle to pull to one side.
brakes automatically for approximately
2 seconds and releases the brake after 2
To dry the brakes, apply the brakes
seconds or when the accelerator pedal is
lightly until the braking action returns to
depressed.
normal, taking care to keep the vehicle
under control at all times. If the braking
action does not return to normal, stop
WARNING
as soon as it is safe to do so and call
Always be ready to depress the
an authorized HYUNDAI dealer for
accelerator pedal when starting off on
assistance.
a incline. The HAC activates only for
DO NOT drive with your foot resting on
approximately 2 seconds.
the brake pedal. Even light, but constant
pedal pressure can result in the brakes
overheating, brake wear, and possibly
NOTICE
even brake failure.
• The HAC does not operate when
If a tire goes flat while you are driving,
the shift button is in P (Park) or N
apply the brakes gently and keep the
(Neutral)
vehicle pointed straight ahead while you
• The HAC activates even though the
slow down. When you are moving slowly
ESC (Electronic Stability Control) is
enough for it to be safe to do so, pull off
off but does not activate when the
the road and stop in a safe location.
ESC has malfunctioned.
Keep your foot firmly on the brake pedal
when the vehicle is stopped to prevent
the vehicle from rolling forward.
6-42
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст