Hyundai Sonata (2022 year). Manual in english — page 9
Convenience Features
4. Parking in uneven road
6. Parking in the blind-spot or near a
circular pillar or narrow pillar
ODN8059081L
ODN8A059083
Remote Smart Parking Assist system
may cancel when the vehicle slips or
If you want to park your vehicle in the
the vehicle could not move due to road
blind spot or near a circular pillar and
condition such as pebbles or fragmented
narrow pillar or a pillar surrounded by
stones.
objects such as fire extinguisher and the
parking distance warning chime sounds
three times continuously, the vehicle
5. Parking behind a truck
should not be parked in the area.
7. Parking in a parking place with a
vehicle on the right or left side only
ODN8059082L
An accident may occur when parking
behind a vehicle higher than yours. For
example, bus, truck, etc. Do not use the
system in that case.
ODN8059330
If there is a vehicle on the right or left
side only when you park a vehicle, the
vehicle may cross the parking line.
CAUTION
• Always check for obstacles around
your vehicle before driving.
• Remote Smart Parking Assist
system may be cancelled if you
attach something (cover, etc.) to the
steering wheel.
5-94
05
How Remote Smart Parking
Assist System Works
Remote Moving Forward/Backward
Remote Moving Forward/Backward is
available with the driver outside the
vehicle. Make sure the conditions are
met before activating Remote Moving
Forward/Backward function. With the
function, you can park or exit the vehicle
and the procedure is as follows.
1.
Remote Moving Forward/Backward
ODN8059332
ready:
(1) With the vehicle off: Remotely turn
on the vehicle.
(2) With the vehicle on: with shift
button is in P (Park) position,
then press Remote Smart Parking
Assist system button. Then exit the
vehicle possessing the smart key.
2.
Remote Moving Forward/Backward
assist: Press and hold the Moving
Forward/Backward button of the
OFE048422
smart key to provide the Remote
1.
Remote Moving Ready
Moving Forward/Backward assist
through steering wheel, gear shift and
You can activate Remote Moving
vehicle speed control.
Forward/Backward in 2 ways.
3.
Remote Moving Forward/Backward
(1) With the vehicle turned off, press
complete: When the vehicle reaches
the door lock button of the smart
the desired position, release the
key and then within 4 seconds
smart key button. Then complete the
press the remote start button for
Remote Moving Forward/Backward
over 2 seconds to start up the
by entering the vehicle possessing the
vehicle. The hazard warning light
smart key or by pressing the remote
blinks and displays the status of the
start button of the smart key.
function.
à For the details of remote start up,
Remote Smart Parking
refer to Remote Start in this chapter.
Assist system button
Parking Distance Warning
system button
Remote start button
Moving forward button
Moving backward button
5-95
Convenience Features
ODN8A059248
ODN8059095
(2) Park the vehicle in front of the
2. Remote Moving Forward/Backward
space where you desire to use
Assist
the Remote Moving Forward/
With the vehicle stopped, press and
Backward. Press Remote Smart
hold one of the moving forward/
Parking Assist system button
backward button on the smart key
and select the Remote Moving
and then steering wheel, gear shift
Forward/Backward. Exit the
and vehicle speed are controlled
vehicle possessing the smart key
automatically If the driver releases
and check whether all the doors
the moving forward/backward button
are closed. The hazard warning
while the Remote Moving Forward/
light blinks and Remote Moving
Backward button is in activation, the
Forward/Backward displays
control will stop temporarily. Press the
whether the vehicle is movable or
button again to resume the control.
not.
For your safety, the assist is activated
only when the smart key is within
à You will hear frequent beep sounds if
about 3-5 m (10-16 ft.) from the
the driver gets off the vehicle after the
vehicle.
Remote Moving Forward/Backward is
The vehicle can travel up to 7 m (23 ft.)
ready.
per move. Press the moving forward/
backward button to make additional
movement.
5-96
05
à Press the moving forward/backward
button again after checking the
distance from the vehicles if the
vehicle didn’t move after pressing
and holding the smart key button for
about 5 seconds.
à Under cold weather, take enough time
before pressing the moving forward/
backward button of the smart key
after turning on the vehicle remotely.
It may take more time until the vehicle
moves.
ODN8A059249
à When Remote Moving Forward is
3. Remote Moving Forward/Backward
ready by the above No. (1) method,
Complete
the vehicle recognizes the condition
When the vehicle reaches the desired
as exit. After confirming the
position, Remote Moving Forward/
surroundings within 4 m (13 ft.), it
Backward is completed as follows:
allows to operate the steering wheel
(1) If the driver enters the vehicle with
up to the conditions ahead.
the smart key, Remote Moving
à When Remote Moving Forward is
Forward/Backward is completed. In
ready by the above No. (2) method,
this case, the vehicle stays on.
the vehicle recognizes the condition
(2) If the driver pushes Remote control
as entering to the parking space.
button of the smart key, Remote
According to the front condition, it
Moving Forward/Backward is
immediately allows the vehicle to
completed. In this case, the vehicle
enter to the parking space and line
stays off.
up with the steering wheel control.
However, the function performance
can be degraded up to the shape or
à The parking complete sound (frequent
position of the surrounding objects.
beep) is generated.
à If you select the remote moving
à When the Remote Moving Forward/
backward, both of the No. (1) and (2)
Backward assist is complete, the
methods make the vehicle go straight
gear in P (Park) and Electronic
after lining up.
Parking Brake (EPB) are engaged
à While Remote Moving Forward/
automatically.
Backward assist is operating, the
brake light turns on.
WARNING
Always be careful of unexpected
approach of the other vehicles or
pedestrians during operation.
While the remote moving forward
function works, the vehicle is controlled
by the steering wheel control so that
the obstacles in the blind spots cannot
be detected.
Always check for obstacles around your
vehicle to prevent the accidents.
5-97
Convenience Features
To cancel the Remote Moving
CAUTION
Forward/Backward while in
•
The driver should check for obstacles
operation
in directly around the vehicle.
1. Press the remote start button on the
•
The function may be cancelled if you
smart key.
attach something (cover, etc.) to the
2. The driver should press Remote Smart
steering wheel.
Parking Assist system button while
•
Make sure all the passengers exit the
Remote Moving Forward/Backward is
vehicle when the Remote Moving
instructed.
Forward/Backward is in activation.
3. The driver should shift the gear
•
Make sure all the smart keys are
besides P (parking) while Remote
outside the vehicle when the Remote
Moving Forward/Backward is
Moving Forward/Backward assist is
instructed.
in activation.
4. The driver should press Parking
•
The detection range of the smart key
Distance Warning system button
can be differed by the surroundings
while the Remote Moving Forward/
(ex: Indoor/outdoor, strong electric
Backward is instructed.
field area)
5. During Remote Moving Forward/
•
If the parking distance warning
Backward operation, the vehicle
sounds three consecutive times
turns off when the driver presses the
during operating the Remote Moving
remote start button on the smart key.
Forward/Backward system, you
6. The function is cancelled but the
should not move your vehicle in that
vehicle stays on when the driver
direction since the objects are too
enters the vehicle with the smart key
close. The driver should operate the
and all the doors are open.
vehicle manually.
5-98
05
The Remote Moving Forward/
8. About 3 minutes and 50 seconds
Backward assist will stop
have passed after the Remote Moving
temporarily when:
Forward/Backward assist starts.
1. An obstacle is detected at the
9. The gradient of the road exceeds
direction the vehicle is heading.
the range supported by the Remote
Moving Forward/Backward assist.
2. The door or trunk is opened.
10. The steering, shifting gear and drive
3. The moving forward/backward button
assist are difficult.
on the smart key is released.
11. The suspended status lasts for over 1
4. Multiple buttons on the smart key are
minute.
pressed at the same time.
12. The driver continuously presses and
5. The distance between the smart key
releases the smart key’s moving
and vehicle is over 4 m (13 ft.).
forward/backward button over 10
6. A button on the other smart key is
times.
pressed during operation.
13. The Traction Control System (TCS) is
7. Rear Cross-Traffic Collision-Avoidance
activated while controlling the vehicle
Assist system is activated while
speed.
reserving.
14. The smart key is damaged.
8. The vehicle moves 7 m (23 ft.) with the
15. The accelerator/brake pedal is
Remote Moving Forward/Backward
depressed while all the doors are
while the smart key is pressed.
closed.
(Maximum travel distance per move)
16. The brake pedal is depressed while
the driver’s door is open and the
à The vehicle stops when the Remote
smart key is outside the vehicle.
Smart Parking Assist system will stop
temporarily and the function will
17. The vehicle travels more than 14 m
(46 ft.) after the Remote Moving
resume when the above condition is
cleared.
Forward/Backward assist is activated.
18. The theft alarm system is activated.
The Remote Moving Forward/
Backward assist is cancelled while
à When the Remote Moving Forward/
in operation when:
Backward is completed, the gear in
1. The driver holds the steering wheel
P(Park) and Electronic Parking Brake
while the steering wheel is controlled.
(EPB) are engaged automatically and
2. The gear is shifted or the Electronic
the vehicle turns off.
Parking Brake (EPB) is activated.
à The frequent beep sounds are
3. The hood opens.
generated to show the deactivation
status.
4. The vehicle speed exceeds 5km/h (3
mph).
5. The vehicle accelerates suddenly.
6. The vehicle slips back while
controlling the vehicle speed.
7. The wheel is stuck and the vehicle is
unable to move.
5-99
Convenience Features
Additional Instructions
Parking assist conditions not met
When the Remote Smart Parking Assist
system is in operation, the system may
be cancelled regardless of the instruction
order.
The appeared messages could be
differed according to the circumstances.
Follow the instructions provided while
driving your vehicle with the Remote
Smart Parking Assist system in activation.
When the function works, please follow
the displayed messages and the driver
ODN8A059261
should be cautious for safety.
When Remote Smart Parking Assist
Malfunction warning
system is not getting ready for activation,
the above message will appear when
Remote Smart Parking Assist system
button is pressed.
Press the button again after a while and
check whether the function operates
properly.
à Remote Smart Parking Assist system is
on standby for a while, you should not
use the Remote Smart Parking Assist
system and have your vehicle checked
ODN8A059262
by an authorized HYUNDAI dealer.
If there is a problem with Remote
Smart Parking Assist system, the above
message will appear when the system is
turned on.
In addition, the indicator on Remote
Smart Parking Assist system button
will blink and the warning sound will
beep three times. (The Parking Distance
Warning system can be operable
depending on the failure type.)
If you recognize any problem, have
the vehicle checked by an authorized
HYUNDAI dealer.
5-100
05
Display Operation Status
While Remote Smart Parking Assist system is on, Smart key / Hazard lamp
status is displayed
The LED on the smart key and hazard warning light indicate the vehicle status as
follows.
à The status is displayed when the Remote Moving Forward/Backward function
works.
Vehicle status
Hazard lamp
Smart key LED
Remote Moving Forward/Backward
Green LED blinks
-
function in activation
continuously
Remote Moving Forward/Backward
Blinking
Red LED blinks
function temporarily stopped/in stand by
continuously
Off after blinking 3
Red LED illuminates
Remote Moving Forward/Backward
times
for 4 seconds and
function deactivated
then light-out
Green LED
Remote Moving Forward/Backward
Off after one blinking
illuminates for 4
function completed
seconds and then
light-out
ODN8059097
à When the distance between the smart
key and vehicle is over 4 m (13 ft.),
the smart key LED may not display
normally. You should use it within the
operable range.
5-101
Convenience Features
Link with other systems
How the Remote Moving
Activation of other systems may
Forward/Backward System
be restricted according to the
Works
circumstances while Remote Smart
Backward Parking
Parking Assist system is in activation.
The systems linked to the Remote Smart
Parking Assist system are as follows:
1. Idle Stop & Go
(1) While Remote Smart Parking
Assist system is operating, ISG is
deactivated.
(2) If Remote Smart Parking Assist
system is completed or cancelled,
ISG can be activated.
2. Auto Hold
ODN8059255
(1) The activated Auto Hold is
switched to deactivation status
when Remote Smart Parking Assist
system starts.
(2) The Auto Hold button will not
respond while Remote Smart
Parking Assist system is in
activation.
(3) After Remote Smart Parking
Assist system is completed or
deactivated, the Auto Hold will
return to the status before Remote
ODN8059335
Smart Parking Assist system was
activated.
3. Electronic Stability Control (ESC)
(1) Electronic Stability Control (ESC)
system switches from OFF to
activation status (ESC OFF button
turns off) when Remote Smart
Parking Assist system is activated.
(2) The ESC OFF button will not
respond while Remote Smart
Parking Assist system is in
ODN8059257
activation.
(1)
Search for parking space and line up
(3) The ABS/TCS/ESC system activates
the vehicle.
while Remote Smart Parking Assist
(2) Move until the spot where the
system is in activation.
passengers can get off the vehicle
(4) After Remote Smart Parking
with ease.
Assist system is completed or
(3) Press the Remote Moving Forward/
deactivated, the ESC maintains the
Backward button with the shift
ON status.
button placed in P (Park).
5-102
05
(4) Get out of the vehicle with the smart
Forward Parking
key and close all of the doors.
(5) While you press and hold the
backward button of the smart key
within the operable distance, the
vehicle stays moving.
(6) Complete the Remote Moving
Forward/Backward with the remote
control button and press the Door
Lock button after parking the vehicle
to the desired position and releasing
the backward button of the smart key
ODN8059258
ODN8059336
ODN8059260
(1) Search for parking space and line up
the vehicle.
(2) Move until the spot where the
passengers can get off the vehicle
with ease.
(3) Press the Remote Moving Forward/
Backward button with the shift
button placed in P (Park).
(4) Get out of the vehicle with the smart
key and close all of the doors.
5-103
Convenience Features
(5) While you press and hold the forward
button of the smart key within the
operable distance, the vehicle stays
moving.
(6) Complete the Remote Moving
Forward/Backward with the remote
control button and press the Door
Lock button after parking the vehicle
to the desired position and releasing
the forward button of the smart key.
5-104
05
mAnUAl climATe conTrol SySTem (if eQUippeD)
Type A
ODN8A059100
Type B
ODN8A059101
1. Fan speed control knob
5. Rear window defroster button
2. Temperature control knob
6. A/C (Air conditioning) button
3. Mode selection buttons
7. Air intake control button
4. Front windshield defroster button
8. Max A/C selection button
5-105
Convenience Features
Heating and Air Conditioning
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of
heating and cooling, select the mode
according to the following:
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to fresh
mode or recirculation mode position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
When starting the vehicle in cold weather
a more efficient way to heat the passen-
ger compartment is to do the following.
- Turn off or lower the blower, right
after starting the engine.
• Engine temperature is still low and
the air flow from the heater is still
cold.
- After a few minutes of engine warm
up, turn on or set the fan to a higher
level and adjust the temperature
setting to hot.
5-106
05
Mode selection
(if equipped)
(if equipped)
ODN8059107
5-107
Convenience Features
Defrost-Level (A, D)
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.
ODN8059106
The mode selection button controls
the direction of the air flow through the
ventilation system.
Face-Level (B, D, F)
ODN8059108
MAX A/C-Level (B, D, F)
Air flow is directed toward the upper
The MAX A/C mode is used to cool the
body and face. Additionally, each outlet
inside of the vehicle faster. Air flow is
can be controlled to direct the air
directed toward the upper body and
discharged from the outlet.
face.
In this mode, the A/C button and the
Bi-Level (B, C, D, E, F)
Recirculation mode button cannot be
selected. Turn the fan speed mode to
adjust.
Air flow is directed towards the face and
the floor.
After the interior cabin has cooled
sufficiently, move the temperature knob
away from the MAX A/C setting and
Floor-Level (A, C, D, E)
adjust the knob to the desired position.
If you wish to continue using A/C
ON, make sure the A/C button LED is
Most of the air flow is directed to the
illuminated.
floor, with a small amount of the air
being directed to the windshield and side
window defrosters.
Floor & Defrost (A, C, D, E)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
5-108
05
Instrument panel vents
Air intake control
Type A
ODN8059109
ODN8059111
Type B
The instrument panel vent air flow can be
directed up/down or left/right using the
vent adjustment lever.
To close the vent adjustment lever, rotate
it to the outer side till the end. To open
the vent, rotate it to the inner side.
Temperature control
ODN8059112
The air intake control button is used to
select either Fresh mode (outside air) or
Recirculation mode (cabin air).
Recirculation mode
When Recirculation mode
is selected, air from the
passenger compartment will
be recirculated through the
ODN8059110
system and heated or cooled
The temperature will increase by turning
according to the function
the knob to the right.
selected.
The temperature will decrease by turning
the knob to the left.
Fresh mode
Type A
When Fresh mode is selected,
air enters the vehicle from
outside and is heated or
cooled according to the
Type B
function selected.
5-109
Convenience Features
Fan speed control
Information
Using the system primarily in Fresh mode
and Recirculation mode only when needed
is recommended for best results.
Prolonged operation of the heater in
Recirculation mode and without the A/C
ON can cause fogging of the windshield.
In addition, prolonged use of the A/C
ON in Recirculation mode may result in
excessively dry, dehumidified air in the
cabin.
ODN8A059113
WARNING
Turn the knob to the right to increase
the fan speed and airflow. Turn the knob
•
Continued use of the climate control
to the left to decrease fan speed and
system operation in Recirculation
airflow.
mode for a prolonged period of
Setting the fan speed control knob to the
time may cause drowsiness to the
“0” position turns off the fan.
occupants in the cabin. This may lead
to loss of vehicle control which may
lead to an accident.
NOTICE
•
Continued use of the climate control
Operating the fan speed when the
system operation in Recirculation
ignition switch is in the ON position
mode with the A/C OFF may allow
could cause the battery to discharge.
humidity to increase inside the
Operate the fan speed when the engine
cabin. This may cause condensation
is running.
to accumulate on the windshield and
obscure visibility.
Air conditioning
•
Do not sleep in your vehicle or
remain parked in your vehicle with
the windows up and either the
heater or the air conditioning ON for
prolonged periods of time. Doing so
may increase the levels of carbon
dioxide in the cabin which may lead
to serious injury or death.
ODN8059114
Push the A/C button to turn the system
on (indicator light will illuminate) and off.
5-110
05
System Operation
Air conditioning
Cooling / Ventilation
Your HYUNDAI vehicle air conditioning
system is filled with R-1234yf refrigerant.
1. Select the Face Level
mode.
1. Start the engine.
2. Set the air intake control to fresh
mode.
2. Press the air conditioning button.
3. Set the temperature control to the
3. Set the mode to the Face Level
desired position.
mode.
4. Set the fan speed control to the
4. Set the air intake control to
desired speed.
Recirculation mode temporarily to
allow the cabin to cool quickly. When
Heating
the desired temperature in the cabin
is reached, change the air intake
1. Select the Floor Level
mode.
control back to Fresh mode.
2. Set the air intake control to fresh
5. Adjust the fan speed control and
mode.
temperature control to maintain
3. Set the temperature control to the
maximum comfort.
desired position.
When maximum cooling is desired, set
4. Set the fan speed control to the
the temperature control to the MAX A/C
desired speed.
position, then set the fan speed control
5. If desired, turn the air conditioning ON
to the highest setting.
with the temperature control knob set
to heat in order to dehumidify the air
NOTICE
before it enters into the cabin.
When using the air conditioning system,
If the windshield fogs up, select the Floor
monitor the engine temperature gauge
& Defrost
mode or press the Front
closely while driving up hills or in heavy
Defrost
mode.
traffic when outside temperatures are
high. Air conditioning system operation
Operation Tips
when climbing a steep grade or in high
• To keep dust or unpleasant fumes
outside ambient temperatures can
from entering the vehicle through the
cause engine overheating.
ventilation system, temporarily set
Continue to use the fan, but turn the air
the air intake control to recirculation
conditioning system off if the engine
mode. Return the control to Fresh
temperature gauge indicates engine
mode when the unpleasant air outside
overheating.
has diminished. This will help keep the
driver alert and comfortable.
• To help prevent the inside of the
windshield from fogging, set the air
intake control to fresh mode and fan
speed to the desired position, turn
on the air conditioning system, and
adjust the temperature control to the
desired temperature.
5-111
Convenience Features
Air conditioning system operation tips
System Maintenance
•
If the vehicle has been parked in
Cabin air filter
direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.
•
After sufficient cooling has been
achieved, switch back from the
recirculated air to the fresh outside air
position.
•
To help reduce moisture inside of
the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
OIK047401L
conditioning system with the windows
[A] : Outside air, [B] : Recirculated air
and sunroof closed.
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
•
Use the air conditioning system
every month only for a few minutes
The cabin air filter is installed behind
to ensure maximum system
the glove box. It filters the dust or other
performance.
pollutants that enter the vehicle through
•
If you operate air conditioner
the heating and air conditioning system.
excessively, the difference between
Have the cabin air filter replaced by an
the temperature of the outside air and
authorized HYUNDAI dealer according to
that of the windshield could cause
the maintenance schedule. If the vehicle
the outer surface of the windshield
is being driven in severe conditions such
to fog up, causing loss of visibility. In
as dusty or rough roads, more frequent
this case, set the mode selection knob
cabin air filter inspections and changes
or button to the
position and fan
are required.
speed control to the lower speed.
If the air flow rate suddenly decreases,
the system should be checked at an
authorized HYUNDAI dealer.
Checking the amount of air
conditioner refrigerant and
compressor lubricant
When the amount of refrigerant is low,
the performance of the air conditioning
is reduced. Overfilling also reduces the
performance of the air conditioning
system.
Therefore, if abnormal operation is
found, have the system inspected by an
authorized HYUNDAI dealer.
5-112
05
NOTICE
It is important that the correct type and
amount of oil and refrigerant is used.
Otherwise, damage to the compressor
and abnormal system operation may
occur. To prevent damage, the air
conditioning system in your vehicle
should only be serviced by trained and
certified technicians.
WARNING
Vehicles equipped with R-1234yf
Since the refrigerant is
mildly flammable and
operated at high pressure,
the air conditioning system
should only be serviced
by trained and certified
technicians. It is important
that the correct type
and amount of oil and
refrigerant are used.
All refrigerants should be reclaimed
with proper equipment.
Venting refrigerants directly to the
atmosphere is harmful to individuals
and environment. Failure to heed these
warnings can lead to serious injuries.
5-113
Convenience Features
AUTomATic climATe conTrol SySTem (if eQUippeD)
ODN8059102L
1. Driver’s temperature control knob
7. Air conditioning button
2. Passenger’s temperature control knob
8. Air intake control button
3. AUTO (automatic control) button
9. Rear window defroster button
4. SYNC button
10.Fan speed control toggle switch
5. OFF button
11. Mode selection toggle switch
6. Front windshield defroster button
12. Climate control information screen
5-114
05
Automatic Heating and Air
Driver’s side
Passenger’s side
Conditioning
ODN8059116
2. Turn the temperature control knob
to set the desired temperature. If
ODN8059115
the temperature is set to the lowest
1. Press the AUTO button.
setting (Lo), the air conditioning
system will operate continuously.
The modes, fan speeds, air intake and
air-conditioning will be controlled
•
To turn the automatic operation off,
automatically according to the
select any button of the following:
temperature setting you select.
- Mode selection button
- Front windshield defroster button
(Press the button one more time
to deselect the front windshield
defroster function. The ‘AUTO’ sign
will illuminate on the information
screen once again.)
- Fan speed control toggle switch
The selected function will be
controlled manually while other
functions operate automatically.
•
For your convenience and improved
ODN8059239
operating efficiency, use the AUTO
You can control the wind strength in
button and set the temperature to
three stages by pushing the AUTO button
22°C (72 °F).
during automatic operation.
- HIGH : Provide rapid air conditioning
and heating with strong wind
- MEDIUM : Provide air conditioning
and heating with medium
strength wind
- LOW : It is suitable for drivers who
prefer to soft wind.
When you select the temperature to HI
or LO in AUTO mode, the wind strength is
set to ‘HIGH’.
5-115
Convenience Features
Manual Temperature Control
Mode
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this case,
the system works sequentially according
to the order of buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected will
ODN8059214
be controlled automatically.
1. Start the engine.
NOTICE
2. Set the mode to the desired position.
Never place anything near the ambient
To improve the effectiveness of
light/solar sensor to ensure better
heating and cooling, select the mode
control of the heating and cooling
according to the following:
system.
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh
mode position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
7. Press the AUTO button to convert to
full automatic control of the system.
When starting the vehicle in cold
weather using manual temperature
control, operate the system in the
following method to improve heating.
- Turn off or lower the blower, right
after starting the engine.
• Allow the engine to warm up during
this time since the air flow from the
heater is still cold.
- After a few minutes of engine warm
up, turn on or set the fan to a higher
level and adjust the temperature
setting to hot.
5-116
05
Mode selection
(if equipped)
(if equipped)
ODN8H059107
5-117
Convenience Features
Floor-Level (A, C, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and side
window defrosters.
Floor & Defrost (A, C, D, E)
ODN8059129L
Most of the air flow is directed to the
The mode selection button controls
floor and the windshield with a small
the direction of the air flow through the
amount directed to the side window
ventilation system.
defrosters.
The air flow outlet direction is cycled as
follows:
Face-Level (B, D, F)
Air flow is directed toward the upper
ODN8059118
body and face. Additionally, each outlet
can be controlled to direct the air
Defrost-Level (A, D)
discharged from the outlet.
Most of the air flow is directed to the
windshield with a small amount of air
Bi-Level (B, C, D, E, F)
directed to the side window defrosters.
Air flow is directed towards the face and
the floor.
Floor & Defrost (A, C, D, E)
Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.
5-118
05
Instrument panel vents
ODN8059119
ODN8059109
Adjusting the driver and passenger side
temperature equally
The instrument panel vent air flow can be
directed up/down or left/right using the
• Press the “SYNC” button to adjust
vent adjustment lever.
the driver and passenger side
temperature equally.
To close the vent adjustment lever, rotate
it to the outer side till the end. To open
• The passenger side temperature will
the vent, rotate it to the inner side.
be set to the same temperature as the
driver side temperature.
Temperature control
• Turn the driver side temperature
control knob. The driver and
Driver’s side
Passenger’s side
passenger side temperature will be
adjusted equally.
• If you rotate the passenger’s
temperature control knob, the SYNC
button is off and the passenger
side temperature can be operated
individually.
Adjusting the driver and passenger side
temperature individually
ODN8059116
Press the “SYNC” button again to
The temperature will increase by turning
adjust the driver and passenger side
the knob to the right.
temperature individually. The button
The temperature will decrease by turning
indicator will turn off.
the knob to the left.
The temperature will increase or
decrease by 0.5 °C (1 °F) for each
incremental location. When set to the
lowest temperature setting, the air
conditioning will operate continuously.
5-119
Convenience Features
Temperature conversion
Information
If the battery has been discharged or
Using the system primarily in Fresh mode
disconnected, the temperature mode
and Recirculation mode only when needed
display will reset to Centigrade.
is recommended for best results.
To change the temperature unit from °C
Prolonged operation of the heater in
to °F or °F to °C :
Recirculation mode and without the A/C
- Automatic climate control system
ON can cause fogging of the windshield.
Press the AUTO button for 3 seconds
In addition, prolonged use of the A/C
while pressing the OFF button.
ON in Recirculation mode may result in
- Instrument cluster
excessively dry, dehumidified air in the
cabin.
Go to User Settings → Other →
Temperature Unit.
The temperature unit on both the cluster
WARNING
LCD display and the climate control
•
Continued use of the climate control
screen will change.
system operation in Recirculation
mode for a prolonged period of
Air intake control
time may cause drowsiness to the
This is used to select the outside (fresh)
occupants in the cabin. This may lead
air position or recirculated air position.
to loss of vehicle control which may
To change the air intake control position,
lead to an accident.
push the control button.
•
Continued use of the climate control
system operation in Recirculation
Recirculated air position
mode with the A/C OFF may allow
humidity to increase inside the
With the recirculated air
cabin. This may cause condensation
position selected, air from the
to accumulate on the windshield and
passenger compartment will
obscure visibility.
be drawn through the heating
system and heated or cooled
•
Do not sleep in your vehicle or
according to the function
remain parked in your vehicle with
selected.
the windows up and either the
heater or the air conditioning ON for
prolonged periods of time. Doing so
Outside (fresh) air position
may increase the levels of carbon
With the outside (fresh) air
dioxide in the cabin which may lead
position selected, air enters
to serious injury or death.
the vehicle from outside and
is heated or cooled according
to the function selected.
5-120
05
Fan speed control
Air conditioning
ODN8H059319
ODN8059121
The fan speed can be set to the desired
Push the A/C button to manually turn
speed by using the fan speed control
the air conditioning system on (indicator
toggle switch.
light will illuminate).
More air is delivered with higher fan
Push the button again to turn the air
speeds.
conditioning system off.
Pressing the OFF button turns off the fan.
OFF mode
Information
For better sound quality, fan speed may
automatically slow down for a couple
of minutes when you activate voice
recognition or hands free.
NOTICE
Operating the fan when the ignition
switch is in the ON position could cause
the battery to discharge. Operate the
ODN8059123
fan when the engine is running.
Push the OFF button of the front to
turn off the air climate control system.
However, you can still operate the mode
and air intake buttons as long as the
ignition switch is in the ON position.
5-121
Convenience Features
System Operation
Air conditioning
Cooling / Ventilation
Your HYUNDAI vehicle air conditioning
system is filled with R-1234yf refrigerant.
1. Select the Face Level
mode.
1. Start the engine.
2. Set the air intake control to fresh
mode.
2. Press the air conditioning button.
3. Set the temperature control to the
3. Set the mode to the Face Level
desired position.
mode.
4. Set the fan speed control to the
4. Set the air intake control to
desired speed.
Recirculation mode temporarily to
allow the cabin to cool quickly. When
Heating
the desired temperature in the cabin
is reached, change the air intake
1. Select the Floor Level
mode.
control back to Fresh mode.
2. Set the air intake control to fresh
5. Adjust the fan speed control and
mode.
temperature control to maintain
3. Set the temperature control to the
maximum comfort.
desired position.
When maximum cooling is desired, set
4. Set the fan speed control to the
the temperature control to the MAX A/C
desired speed.
position, then set the fan speed control
5. If desired, turn the air conditioning ON
to the highest setting.
with the temperature control knob set
to heat in order to dehumidify the air
NOTICE
before it enters into the cabin.
When using the air conditioning system,
If the windshield fogs up, select the Floor
monitor the engine temperature gauge
& Defrost
mode or press the Front
closely while driving up hills or in heavy
Defrost
mode.
traffic when outside temperatures.
Air conditioning system operation
Operation Tips
when climbing a steep grade or in
• To keep dust or unpleasant fumes
high outside ambient temperatures
from entering the car through the
can cause engine overheating.
ventilation system, temporarily set the
Continue to use the fan, but turn the air
air intake control to the recirculation
conditioning system off if the engine
mode. Return the control to the to
temperature gauge indicates engine
Fresh mode when the unpleasant air
overheating.
outside has diminished. This will help
keep the driver alert and comfortable.
• To help prevent the inside of the
windshield from fogging, set the air
intake control to fresh mode and the
fan speed to the desired position, turn
on the air conditioning system, and
adjust the temperature control to the
desired temperature.
5-122
05
Air conditioning system operation tips
System Maintenance
•
If the vehicle has been parked in
Cabin air filter
direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.
•
After sufficient cooling has been
achieved, switch back from the
recirculated air to the fresh outside air
position.
•
To help reduce moisture inside of
the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
OIK047401L
conditioning system with the windows
[A] : Outside air, [B] : Recirculated air
and sunroof closed.
[C] : Cabin air filter, [D] : Blower
[E] : Evaporator core, [F] : Heater core
•
Use the air conditioning system
every month only for a few minutes
The cabin air filter is installed behind
to ensure maximum system
the glove box. It filters the dust or other
performance.
pollutants that enter the vehicle through
•
If you operate air conditioner
the heating and air conditioning system.
excessively, the difference between
Have the cabin air filter replaced by an
the temperature of the outside air and
authorized HYUNDAI dealer according to
that of the windshield could cause
the maintenance schedule. If the vehicle
the outer surface of the windshield
is being driven in severe conditions such
to fog up, causing loss of visibility. In
as dusty or rough roads, more frequent
this case, set the mode selection knob
cabin air filter inspections and changes
or button to the
position and fan
are required.
speed control to the lower speed.
If the air flow rate suddenly decreases,
the system should be checked at an
authorized HYUNDAI dealer.
5-123
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст