| | | ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Heating and Air Conditioning 1. Start the engine. 2. Set the mode to the desired position. To improve the effectiveness of heating and cooling, select the mode according to the following: - Heating: - Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to fresh mode or recirculation mode position. 5. Set the fan speed control to the desired speed. 6. If air conditioning is desired, turn the air conditioning system on. When starting the vehicle in cold weather a more efficient way to heat the passen- ger compartment is to do the following. - Turn off or lower the blower, right after starting the engine. ś Engine temperature is still low and the air flow from the heater is still cold. - After a few minutes of engine warm up, turn on or set the fan to a higher level and adjust the temperature setting towards hot. 5-82 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Mode selection OCN7050134N 5-83 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Floor & Defrost (A, C, D, E) Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. Defrost-Level (A, D) OCN7050102 Most of the air flow is directed to the The mode selection knob controls the windshield with a small amount of air direction of the air flow through the directed to the side window defrosters. ventilation system. Air can be directed to the floor, dashboard outlets, or windshield. Five symbols are used to represent Face, Bi- Level, Floor, Floor-Defrost and Defrost air position. Face-Level (B, D) Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air OCN7050104 discharged from the outlet. MAX A/C-Level (B, D) (if equipped) The MAX A/C mode is used to cool the Bi-Level (B, C, D, E) inside of the vehicle faster. Air flow is directed toward the upper body and face. Air flow is directed towards the face and the floor. In this mode, the air conditioning and the recirculated air position cannot be Floor-Level (A, C, D, E) selected. Turn the fan speed mode to adjust. Most of the air flow is directed to the floor, with a small amount of the air being directed to the windshield and side window defrosters. 5-84 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Instrument panel vents Air intake control Type A OCN7050107 OCN7050106 Type B Instrument panel vents The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. To close the vent, push the air vent lever in the opposite direction of the passenger. To open the vent, push the air vent lever in the same direction of the passenger. Temperature control OCN7050107L The air intake control button is used to select either Fresh mode (outside air) or Recirculation mode (cabin air). OCN7050105 The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left. 5-85 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Recirculation mode WARNING When Recirculation mode ś Continued use of the climate control is selected, air from the system operation in Recirculation passenger compartment will mode for a prolonged period of be recirculated through the time may cause drowsiness to the system and heated or cooled occupants in the cabin. This may lead according to the function to loss of vehicle control which may selected. lead to an accident. ś Continued use of the climate control Fresh mode system operation in Recirculation Type A When Fresh mode is mode with the A/C OFF may allow selected, air enters the humidity to increase inside the vehicle from outside and is cabin. This may cause condensation heated or cooled according to accumulate on the windshield and to the function selected. obscure visibility. Type B ś Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead Information to serious injury or death. Operating the system primarily in Fresh mode is recommended. Use Recirculation mode temporarily only when needed. Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield. In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin and may promote formation of musty vent odor due to stagnant air. 5-86 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Fan speed control Air conditioning (if equipped) OCN7050108N OCN7050109 Turn the knob to the right to increase Press the A/C button to turn the air the fan speed and airflow. Turn the knob conditioning system on (indicator light to the left to decrease fan speed and will illuminate). Press the button again to airflow. turn the air conditioning system off. Setting the fan speed control knob to the “0” position turns off the fan. NOTICE Operating the fan speed when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan speed when the engine is running. 5-87 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features System Operation Operation Tips Ventilation ś To help keep dust or unpleasant fumes from entering the vehicle through the 1. Select the Face Level mode. ventilation system, temporarily set the 2. Set the air intake control to fresh air intake control to the recirculation mode. mode. Be sure to return the control 3. Set the temperature control to the to fresh mode position when the desired position. irritation has passed to keep fresh air 4. Set the fan speed control to the in the vehicle. This will help keep the driver alert and comfortable. desired speed. ś To help prevent interior fog on the Heating windshield, set the air intake control to fresh mode and fan speed to 1. Select the Floor Level mode. the desired position, turn on the 2. Set the air intake control to fresh air conditioning system, and adjust mode. the temperature control to desired 3. Set the temperature control to the temperature. desired position. 4. Set the fan speed control to the desired speed. 5. If desired, turn the air conditioning ON with the temperature control knob set to heat in order to dehumidify the air before it enters into the cabin. If the windshield fogs up, select the Floor & Defrost mode or rotate the mode selecting knob to the Defrost mode. 5-88 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Air conditioning Air conditioning system operation tips HYUNDAI Air Conditioning Systems are ś If the vehicle has been parked in filled with R-1234yf refrigerant. direct sunlight during hot weather, open the windows for a short time 1. Start the vehicle. to let the hot air inside the vehicle 2. Push the air conditioning button escape. 3. Select the Face Level mode. ś After sufficient cooling has been 4. Set the air intake control to achieved, switch back from Recirculation mode temporarily to recirculation mode to fresh mode. allow the cabin to cool quickly. When ś To help reduce moisture inside of the desired temperature in the cabin the windows on rainy or humid is reached, change the air intake days, decrease the humidity inside control back to Fresh mode. the vehicle by operating the air 5. Adjust the fan speed control and conditioning system with the windows temperature control to maintain and sunroof closed. maximum comfort. ś During air conditioning system operation, you may occasionally NOTICE notice a slight change in engine speed as the air conditioning compressor When using the air conditioning system, cycles. This is a normal system monitor the temperature gauge closely operation characteristic. while driving up hills or in heavy traffic ś Use the air conditioning system when outside temperatures are high. Air conditioning system operation may every month only for a few minutes to ensure maximum system cause engine overheating. Continue to use the blower fan but turn the performance. air conditioning system off if the ś When using the air conditioning temperature gauge indicates engine system, you may notice clear water overheating. dripping (or even puddling) on the ground under the passenger side of the vehicle. This is a normal system operation characteristic. ś If you operate the air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection button to the position and set the fan speed control knob to the lowest speed setting. 5-89 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features System Maintenance Checking the amount of air conditioner refrigerant and Cabin air filter compressor lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by an authorized HYUNDAI dealer. NOTICE OIK047401L It is important that the correct type and [A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower amount of oil and refrigerant are used. Otherwise, damage to the compressor [E] : Evaporator core, [F] : Heater core and abnormal system operation may The cabin air filter is installed behind occur. To prevent damage, the air the glove box. It filters the dust or other conditioning system in your vehicle pollutants that enter the vehicle through should only be serviced by trained and the heating and air conditioning system. certified technicians. Have the cabin air filter replaced by an authorized HYUNDAI dealer according to NOTICE the maintenance schedule. If the vehicle is being driven in severe conditions such ś The refrigerant system should only as dusty or rough roads, more frequent be serviced by trained and certified cabin air filter inspections and changes technicians to insure proper and safe are required. operation. If the air flow rate suddenly decreases, ś The refrigerant system should be the system should be checked at an serviced in a well-ventilated place. authorized HYUNDAI dealer. ś The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from Information a used or salvaged vehicle and new ś Replace the filter according to the replacement MAC evaporators shall Maintenance Schedule. be certified (and labeled) as meeting SAE Standard J2842. ś If the car is being driven in severe conditions such as dusty, rough roads, more frequent cabin air filter inspections and changes are required. ś When the air flow rate suddenly decreases, have the system be checked by an authorized HYUNDAI dealer. 5-90 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 WARNING Vehicles equipped with R-1234yf Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and OCN7050060 refrigerant are used. Air conditioning refrigerant label All refrigerants should be reclaimed You can find out which air conditioning with proper equipment. refrigerant is applied to your vehicle on Venting refrigerants directly to the the label located inside of the hood. atmosphere is harmful to individuals and environment. Failure to heed these Example warnings can lead to serious injuries. OHYK059001 Each symbols and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of Compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to service air conditioning system 5-91 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features $8720$7,& &/,0 $7( &21752/ 6<67(0 ǣ,) (48,33('Ǥ OCN7050110L 1. Driver’s temperature control knob 2. Passenger’s temperature control knob 3. AUTO (automatic control) button 4. SYNC button 5. OFF button 6. Front windshield defroster button 7. Air conditioning button 8. Air intake control button 9. Rear window defroster button 10.Fan speed control button 11. Mode selection button 12. Climate control information screen 5-92 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Automatic Heating and Air When you select the temperature to HI or LO in AUTO mode, the fan speed is set Conditioning to ‘HIGH’. Driver’s seat Passenger’s seat OCN7050112 OCN7050114 1. Press the AUTO button 2. Turn the temperature control knob The modes, fan speeds, air intake and to set the desired temperature. If air-conditioning will be controlled the temperature is set to the lowest automatically according to the setting (Lo), the air conditioning temperature setting you select. system will operate continuously. ś To turn the automatic operation off, select any button of the following: - Mode selection button - Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The ‘AUTO’ sign will illuminate on the information screen once again.) - Fan speed control toggle switch OCN7050113 The selected function will be controlled manually while other You can control the blower strength in functions operate automatically. three stages by pushing the AUTO button during automatic operation. ś For your convenience and overall system efficiency, use the AUTO - HIGH : Provide rapid air conditioning button and set the temperature to and heating with strong blower 72°F (22°C). - MEDIUM : Provide air conditioning and heating with medium strength blower - LOW : Is suitable for drivers that prefer lower air speeds 5-93 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Manual Heating and Air Conditioning The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected. When pressing any button except the AUTO button while using automatic operation, the functions not selected will be controlled automatically. OCN7050133 1. Start the engine. 2. Set the mode to the desired position. Information To improve the effectiveness of Never place anything near the sensor to heating and cooling, select the mode ensure better control of the heating and according to the following: cooling system. - Heating: - Cooling: 3. Set the temperature control to the desired position. 4. Set the air intake control to fresh mode. 5. Set the fan speed control to the desired speed. 6. If air conditioning is desired, turn the air conditioning system on. 7. Press the AUTO button in order to convert to full automatic control of the system. 5-94 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Mode selection OCN7050103N 5-95 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Bi-Level (B, C, D, E) Air flow is directed towards the face and the floor. Floor-Level (A, C, D, E) Most of the air flow is directed to the floor, with a small amount of the air OCN7050115 being directed to the windshield and side The mode selection toggle switch window defrosters. controls the direction of the air flow through the ventilation system. Floor & Defrost (A, C, D, E) The air flow outlet direction is cycled as follows: Most of the air flow is directed to the floor and the windshield with a small amount directed to the side window defrosters. Face-level (B, D) Air flow is directed toward the upper body and face. Additionally, each outlet can be controlled to direct the air discharged from the outlet. 5-96 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Temperature control Driver’s seat Passenger’s seat OCN7050116 Defrost-Level (A, D) OCN7050114 Most of the air flow is directed to the The temperature will increase by turning windshield with a small amount of air the knob to the right. directed to the side window defrosters. The temperature will decrease by turning the knob to the left. The temperature will increase or decrease by 1°F (0.5°C) for each incremental location. When set to the lowest temperature setting, the air conditioning will operate continuously. OCN7050106 Instrument panel vents The instrument panel vent air flow can be directed up/down or left/right using the vent adjustment lever. To close the vent, push the air vent lever in the opposite direction of the passenger. To open the vent, push the air vent lever in the same direction of the passenger. 5-97 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Temperature conversion If the battery has been discharged or disconnected, the temperature mode display will reset to Centigrade. To change the temperature unit from °C to °F or °F to °C : - Automatic climate control system Press the AUTO button for 3 seconds while pressing the OFF button. - Instrument clusterAutomatic climate OCN7050117 control system Adjusting the driver and passenger side *R WR 8VHU 6HWWLQJV Ɵ 2WKHU Ɵ temperature equally Temperature Unit. ś Press the “SYNC” button to adjust The temperature unit on both the the driver and passenger side cluster LCD display and the climate temperature equally. control screen will change. ś The passenger side temperature will be set to the same temperature as the Air intake control driver side temperature. Recirculated air position ś Turn the driver side temperature With the recirculated air control knob. The driver and position selected, air from the passenger side temperature will be passenger compartment will adjusted equally. be drawn through the heating ś If you rotate the passenger’s system and heated or cooled temperature control knob, the SYNC according to the function button is off and the passenger selected. side temperature can be operated individually. Outside (fresh) air position With the outside (fresh) air Adjusting the driver and passenger side position selected, air enters temperature individually the vehicle from outside and Press the “SYNC” button again to is heated or cooled according adjust the driver and passenger side to the function selected. temperature individually. The button indicator will turn off. 5-98 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Fan speed control Information Operating the system primarily in Fresh mode is recommended. Use Recirculation mode temporarily only when needed. Prolonged operation of the heater in Recirculation mode and without the A/C ON can cause fogging of the windshield. In addition, prolonged use of the A/C ON in Recirculation mode may result in excessively dry, dehumidified air in the cabin and may promote formation of musty vent odor due to stagnant air. OCN7050118 The fan speed can be set to the desired WARNING speed by using the fan speed control toggle switch. ś Continued use of the climate control system operation in Recirculation More air is delivered with higher fan speeds. mode for a prolonged period of time may cause drowsiness to the Pressing the OFF button turns off the fan. occupants in the cabin. This may lead to loss of vehicle control which may NOTICE lead to an accident. Operating the fan speed when the ś Continued use of the climate control ignition switch is in the ON position system operation in Recirculation could cause the battery to discharge. mode with the A/C OFF may allow Operate the fan speed when the engine humidity to increase inside the cabin. is running. This may cause condensation to accumulate on the windshield and obscure visibility. ś Do not sleep in your vehicle or remain parked in your vehicle with the windows up and either the heater or the air conditioning ON for prolonged periods of time. Doing so may increase the levels of carbon dioxide in the cabin which may lead to serious injury or death. 5-99 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Air conditioning System Operation Ventilation 1. Select the Face Level mode. 2. Set the air intake control to fresh mode. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating OCN7050119 1. Select the Floor Level mode. Push the A/C button to manually turn 2. Set the air intake control to fresh the air conditioning system on (indicator mode. light will illuminate). 3. Set the temperature control to the Push the button again to turn the air desired position. conditioning system off. 4. Set the fan speed control to the desired speed. OFF mode 5. If desired, turn the air conditioning ON with the temperature control knob set to heat in order to dehumidify the air before it enters into the cabin. If the windshield fogs up, select the Front & Deforst mode or press the Front Defrost mode. Operation Tips ś To help keep dust or unpleasant fumes from entering the vehicle through the OCN7050121 ventilation system, temporarily set the Push the OFF button of the front to air intake control to the recirculation turn off the air climate control system. mode. Be sure to return the control However, you can still operate the mode to fresh mode position when the and air intake buttons as long as the irritation has passed to keep fresh air ignition switch is in the ON position. in the vehicle. This will help keep the driver alert and comfortable. ś To help prevent interior fog on the windshield, set the air intake control to fresh mode and fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to desired temperature. 5-100 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Air conditioning Air conditioning system operation tips HYUNDAI Air Conditioning Systems are ś If the vehicle has been parked in filled with R-1234yf refrigerant. direct sunlight during hot weather, open the windows for a short time 1. Start the vehicle. to let the hot air inside the vehicle 2. Push the air conditioning button. escape. 3. Select the Face Level mode. ś After sufficient cooling has been 4. Set the air intake control to achieved, switch back from Recirculation mode temporarily to recirculation mode to fresh mode. allow the cabin to cool quickly. When ś To help reduce moisture inside of the desired temperature in the cabin the windows on rainy or humid is reached, change the air intake days, decrease the humidity inside control back to Fresh mode. the vehicle by operating the air 5. Adjust the fan speed control and conditioning system with the windows temperature control to maintain and sunroof closed. maximum comfort. ś During air conditioning system operation, you may occasionally NOTICE notice a slight change in engine speed as the air conditioning compressor When using the air conditioning system, cycles. This is a normal system monitor the temperature gauge closely operation characteristic. while driving up hills or in heavy traffic ś Use the air conditioning system when outside temperatures are high. Air conditioning system operation may every month only for a few minutes to ensure maximum system cause engine overheating. Continue to use the blower fan but turn the performance. air conditioning system off if the ś When using the air conditioning temperature gauge indicates engine system, you may notice clear water overheating. dripping (or even puddling) on the ground under the passenger side of the vehicle. This is a normal system operation characteristic. ś If you operate the air conditioner excessively, the difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection button to the position and set the fan speed control knob to the lowest speed setting. 5-101 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features System Maintenance Checking the amount of air conditioner refrigerant and Cabin air filter compressor lubricant When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by an authorized HYUNDAI dealer. NOTICE OIK047401L It is important that the correct type and [A] : Outside air, [B] : Recirculated air [C] : Cabin air filter, [D] : Blower amount of oil and refrigerant are used. Otherwise, damage to the compressor [E] : Evaporator core, [F] : Heater core and abnormal system operation may The cabin air filter is installed behind occur. To prevent damage, the air the glove box. It filters the dust or other conditioning system in your vehicle pollutants that enter the vehicle through should only be serviced by trained and the heating and air conditioning system. certified technicians. Have the cabin air filter replaced by an authorized HYUNDAI dealer according to NOTICE the maintenance schedule. If the vehicle is being driven in severe conditions such ś The refrigerant system should only as dusty or rough roads, more frequent be serviced by trained and certified cabin air filter inspections and changes technicians to insure proper and safe are required. operation. If the air flow rate suddenly decreases, ś The refrigerant system should be the system should be checked at an serviced in a well-ventilated place. authorized HYUNDAI dealer. ś The air conditioning evaporator (cooling coil) shall never be repaired or replaced with one removed from Information a used or salvaged vehicle and new ś Replace the filter according to the replacement MAC evaporators shall Maintenance Schedule. be certified (and labeled) as meeting SAE Standard J2842. ś If the car is being driven in severe conditions such as dusty, rough roads, more frequent cabin air filter inspections and changes are required. ś When the air flow rate suddenly decreases, have the system be checked by an authorized HYUNDAI dealer. 5-102 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 WARNING Vehicles equipped with R-1234yf Since the refrigerant is mildly flammable and operated at high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and ODN8A079026 refrigerant are used. Air conditioning refrigerant label All refrigerants should be reclaimed You can find out which air conditioning with proper equipment. refrigerant is applied to your vehicle on Venting refrigerants directly to the the label located inside of the hood. atmosphere is harmful to individuals and environment. Failure to heed these Example warnings can lead to serious injuries. OHYK059001 Each symbols and specification on the air conditioning refrigerant label is represented as below: 1. Classification of refrigerant 2. Amount of refrigerant 3. Classification of Compressor lubricant 4. Caution 5. Flammable refrigerant 6. To require registered technician to service air conditioning system 5-103 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features WINDSHIELD DEFROSTING AND DEFOGGING Manual Climate Control System WARNING To defog inside windshield Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause the outer surface of the windshield to fog up, causing loss of visibility. In this case, set the mode selection knob or button to the position and fan speed control knob or button to lower speed. OCN7050122N ś For maximum defrost performance, set the temperature control knob [A] : Type A, [B] : Type B to the highest temperature setting 1. Select any fan speed except “0” (rotated all the way to the right) and position. the fan speed control to the highest 2. Select the desired temperature. setting. 3. Select the or position. ś If warm air to the floor is desired while defrosting or defogging, set the mode 4. Fresh mode air will be selected to the floor-defrost position. automatically. Additionally, the air conditioning (if equipped) will ś Before driving, clear all snow and ice automatically operate if the mode is from the windshield, rear window, selected to the position. side view mirrors, and all side windows. If the air conditioning and fresh mode are not selected automatically, press the ś Clear all snow and ice from the corresponding button manually. hood and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up inside of the windshield. 5-104 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 To defrost outside windshield Automatic Climate Control System To defog inside windshield OCN7050123N [A] : Type A, [B] : Type B OCN7050124L 1. Set the fan speed to the highest setting (knob rotated all the way to 1. Select desired fan speed. the right). 2. Select desired temperature. 2. Set the temperature control to the 3. Press the defroster button ( ). highest temperature setting. 4. The air-conditioning will turn on 3. Select the position. according to the detected ambient 4. Fresh mode air and air conditioning temperature, fresh mode and (if equipped) will be selected higher fan speed will be selected automatically. automatically. If the air-conditioning, fresh mode and higher fan speed are not selected automatically, adjust the corresponding button or knob manually. If the position is selected, lower fan speed is controlled to higher fan speed. 5-105 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features To defrost outside windshield Defogging Logic (if equipped) To help reduce the probability of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To cancel or return the defogging logic, do the following Manual climate control system 1. Turn the ignition switch to the ON position. OCN7050125L 2. Select defroster mode ( ). 1. Set fan speed to the highest position. 3. Press the air intake control button at 2. Set temperature to the extreme hot least 5 times within 3 seconds. The (HI) position. process should be completed within 3. Press the defroster button ( ). 10 seconds after the defroster mode ( 4. The air-conditioning will turn on ) is selected. according to the detected ambient The LED indicator on the air intake temperature and fresh mode will be button will blink 3 times to indicate that selected automatically. the defogging logic has been disabled. If the position is selected, lower fan Repeat the steps again to re-enable the speed is controlled to higher fan speed. defogging logic. If the battery has been discharged or disconnected, it resets to the defog logic status. Automatic climate control system 1. Turn the ignition switch to the ON position. 2. Press the defroster button ( ). 3. While pressing the air conditioning button (A/C), press the air intake control button at least 5 times within 3 seconds. The automatic climate control information screen will blink 3 times to indicate that the defogging logic has been disabled. Repeat the steps again to re-enable the defogging logic. If the battery has been discharged or disconnected, it resets to the defog logic status. 5-106 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Auto Defogging System (only To cancel or reset the Auto Defogging System for automatic climate control system, if equipped) Press the front windshield defroster button for 3 seconds when the ignition switch is in the ON position. When the Auto Defogging System is canceled, defrost button indicator will blink 3 times. When the Auto Defogging System is reset, defrost button indicator will blink 6 times without a signal. Information OCN7050061 ś When the air conditioning is turned on by Auto defogging system, if you Auto defogging helps reduce the try to turn off the air conditioning, the possibility of fogging up the inside of the indicator will blink 3 times and the air windshield by automatically sensing the conditioning will not be turned off. moisture on inside the windshield. ś To maintain the effectiveness and The auto defogging system operates efficiency of the Auto Defogging when the heater or air conditioning is on. System, do not select Recirculation When the Auto Defogging mode while the system is operating. System operates, the indicator ś When the Auto Defogging System is will illuminate. operating, the fan speed adjustment If a high amount of humidity is detected knob, the temperature adjustment in the vehicle, the Auto Defogging knob, and the air intake control button System will be enabled. are all disabled. The following steps will be performed NOTICE automatically: Do not remove the sensor cover located Step 1) The A/C button will turn ON. on the upper end of the driver side Step 2) The air intake control will change windshield glass. to Fresh mode under low outside Damage to system parts could occur temperature. and may not be covered by your vehicle Step 3) The mode will be changed to warranty. defrost to direct airflow to the windshield. Step 4) The fan speed will be increased. 5-107 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Defroster Information ś If there is heavy accumulation of snow NOTICE on the rear window, brush it off before To prevent damage to the conductors operating the rear defroster. bonded to the inside surface of the rear ś The rear window defroster window, never use sharp instruments or automatically turns off after window cleaners containing abrasives approximately 20 minutes or when the to clean the window. ignition switch is in the LOCK/OFF position. Information Outside mirror defroster (if If you want to defrost and defog the equipped) front windshield, refer to “Windshield If your vehicle is equipped with the Defrosting and Defogging” in this chapter. outside mirror defrosters, they will operate at the same time you turn on the Rear window defroster rear window defroster. OCN7050136L The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while engine is running. ś To activate the rear window defroster, press the rear window defroster button located in the center facia switch panel. The indicator on the rear window defroster button illuminates when the defroster is ON. ś To turn off the defroster, press the rear window defroster button again. 5-108 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 &/,0$7 ( &21752/ $'',7,21$/ )($785(6 Sunroof Inside Air Recirculation Automatic Ventilation (if (if equipped) equipped) When the sunroof is opened, outside The system automatically selects the (fresh) air will be automatically selected. fresh mode when the climate control At this time, if you press the air intake system operates over a certain period of control button, recirculated air position time (approximately 30 minutes) in low will be selected but will change back temperature with the recirculation mode to outside (fresh) air after 3 minutes. selected. When the sunroof is closed, the air intake position will return to the original To cancel or reactivate the position that was selected. Automatic Ventilation When the air conditioning system is on, Auto Comfort Control (for select Face Level mode and press the driver’s seat) (if equipped) air recirculation mode button at least 5 The temperature of the driver’s seat times within 3 seconds while pressing warmer, air ventilation seat and the A/C button. heated steering wheel is automatically When the automatic ventilation is controlled depending on the inside and canceled, the indicator blinks 3 times. outside temperature of the vehicle when When the automatic ventilation is the engine is running. activated, the indicator blinks 6 times. To use this function, it must be activated from the Settings menu in the Infotainment system screen. Select: - $OO PHQXV Ɵ 6HWXS Ɵ 9HKLFOH Ɵ +HDWHG / Ventilated Features For more details on Auto Comfort Control, refer to “Seat warmers and air ventilation seat” in chapter 3, and “Heated steering wheel” in chapter 5 5-109 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features 6725$*( &203 $570(17 Center Console Storage WARNING Never store cigarette lighters, propane cylinders, or other flammable/explosive materials in the vehicle. These items may catch fire and/or explode if the vehicle is exposed to hot temperatures for extended periods. WARNING ALWAYS keep the storage compartment covers closed securely while driving. Items inside your vehicle are moving as OCN7050062 fast as the vehicle. If you have to stop To open: or turn quickly, or if there is a crash, the Grab and hold the latch on the armrest items may fly out of the compartment then lift the lid. and may cause an injury if they strike the driver or a passenger. Glove Box NOTICE To avoid possible theft, do not leave valuables in the storage compartments. OCN7050064 To open: Pull the lever (1). WARNING ALWAYS close the glove box door after use. An open glove box door can cause serious injury to the passenger in an accident, even if the passenger is wearing a seat belt. 5-110 ------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 INTERIOR FEATURES Cup Holder (if equipped) WARNING Front ś Avoid abrupt starting and braking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident. ś Do not place uncovered or unsecured cups, bottles, cans, etc., in the cup holder containing hot liquid while the vehicle is in motion. Injuries may result in the event of a sudden stop OCN7050065 or collision. ś Only use soft cups in the cup holders. Rear Hard objects can injure you in an accident. WARNING Keep cans or bottles out of direct sun light and do not put them in a hot vehicle. It may explode. NOTICE ś Keep your drinks sealed while driving to prevent spilling your drink. If liquid OCN7050066 spills, it may get into the vehicle’s Cups or small beverages cups may be electrical/electronic system and placed in the cup holders. damage electrical/electronic parts. ś When cleaning spilled liquids do not use hot air to blow out or dry the cup holder. This may damage the interior. 5-111 ------------------------------------------------------------------------------------------------------------------------------------------------------------- Convenience Features Sunvisor Power Outlet OIG046437 OCN7050068 To use a sunvisor, pull it downward. The power outlet is designed to provide power for mobile telephones or other To use a sunvisor for a side window, pull devices designed to operate with vehicle it downward, unsnap it from the bracket electrical systems. The devices should (1) and swing it to the side (2). draw less than 180 W with the engine To use the vanity mirror, pull down the running. sunvisor and slide the mirror cover (3). Adjust the sunvisor forward or backward (4, if equipped) as needed. WARNING Use the ticket holder (5) to hold tickets. Avoid electrical shocks. Do not place your fingers or foreign objects (pin, etc.) Close the vanity mirror cover securely into a power outlet or touch the power and return the sunvisor to its original outlet with a wet hand. position after use. NOTICE Close the vanity mirror cover securely and return the sunvisor to its original position after use. WARNING For your safety, do not block your view when using the sunvisor. NOTICE Do not put several tickets in the ticket holder at one time. This could cause damage to the ticket holder. 5-112 | |
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст