Hyundai Santa Fe (2006 year). Manual — part 711
MT -4
MANUAL TRANSAXLE (M5GF2)
SPECIL TOOLS
E43B86CA
Item
(Number & Name)
Illustration
Use
09452-21200
Oil seal installer
AMJF002A
Oil seal installation
09200-38001
Engine supporting fisture
AMJF002B
Removal and installation of transaxle
09455-32200
Oil seal puller
UMQG010A
Removal of oil seal
09455-21000
Bearing&gear puller
UMQG010B
Removal of taper roller bearing
09432-33200
Plate
D3233200
Removal of oil seal
GENERAL
MT -5
Item
(Number & Name)
Illustration
Use
09478-26100
Backing plate remover
EKJD506Z
Removal of 4WD coupling backing plate
09478-26000
Flange oil seal installer
EKJA006A
Installation of 4WD coupling flange oil seal
MT -6
MANUAL TRANSAXLE (M5GF2)
MANUAL TRANSAXLE
SYSTEM
SERVICE ADJUSTMENT
PROCEDURE
EC3FEB20
TRANSMISSION OIL INSPECTION AND
REPLACEMENT
1.
After parking the vehicle on a plain, stop the engine.
2.
After removing the oil filler plug and washer, inspect
the manual transaxle fluid condition and quantity.
3.
If the manual transaxle fluid is contaminated, drain it
out by removing the oil drain plug.
4.
Tighten the new oil drain plug and feed manual
transaxle fluid to a proper level.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
Oil type: SAE75W/85
Oil quantity:
1.9 liter(2.0077 US qt, 1.6718 lmp qt)
5.
Retighten the oil filler plug with a new washer.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
BACK UP LAMP SWITCH INSPECTION
1.
Disconnect the back up lamp switch connector(A).
A
KMRE009E
2.
Inspect the continuity of the switch. When the shift
lever is located in reverse range, it should be applied
an electric current.
3.
Replace the back up lamp switch, if necessary.
TORQUE:
29.4~34.4 Nm(3.0~3.5kgf.m, 21.7~25.3lb-ft)
MANUAL TRANSAXLE SYSTEM
MT -7
MANUAL TRANSAXLE
COMPONENTS
E3ECD674
1. Transaxle case
2. Taper roller bearing outer race
3. 1st/2nd shift fork
4. Reverse shift fork
5. Shift rail
6. 3rd/4th shift fork
7. 5th/6th shift fork
8. Spring pin
9. Input shaft
10. Oil guide
11. 1st output shaft
12. 2nd output shaft
13. Differential assembly
14. Needle bearing
15. Clutch housing
16. Concentric slave cylinder assembly
17. Boot
1
2
2
6
11
12
13
2
14
10
2
9
15
16
5
8
8
7
3
4
17
EMRE006A
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст