Hyundai Santa Fe (2006 year). Manual — part 190
LIGHTING SYSTEM
BE -221
LICENSE LAMPS
REPLACEMENT
E83B391E
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens (A) from the panel after
loosening a screw (2EA).
A
SCMBE6465D
3.
Replace the bulb (A).
A
SCMBE6466D
4.
Installation is the reverse of removal.
BE -222
BODY ELECTRICAL SYSTEM
STOP LAMPS
REPLACEMENT
E79FFC53
HIGH MOUNTED STOP LAMP
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate (Refer to the Body group - Tail-
gate).
3.
Remove the high mounted stop lamp assembly after
removing 2 nuts, then remove the spoiler.
SCMBE6477D
4.
Remove the spoiler lamp cover (A) and loosening the
screw (4EA). And then remove the high mounted stop
lamp.
A
SCMBE6478D
5.
Installation is the reverse of removal.
LIGHTING SYSTEM
BE -223
REAR ROOM LAMP
INSPECTION
E4FBF49C
1.
Remove the trunk room lamp assembly then check for
continuity between terminals.
1
2
3
KTKD087A
1
2
3
ON
DOOR
OFF
Terminal
Position
ETQF088A
REPLACEMENT
E48BEEC9
1.
Disconnect the negative (-) battery terminal.
2.
Remove the trunk room lamp lens with a flat-tip screw-
driver and replace the bult.
3.
Remove the trunk room lamp assembly after remov-
ing 2 screws, then disconnect the 3P connector.
KTKD008A
4.
Installation is the reverse of removal.
BE -224
BODY ELECTRICAL SYSTEM
AUTO LIGHTING CONTROL
SYSTEM
SPECIFICATIONS
E968DD1C
Item
Specifications
Rated voltage
5V
Load
Max. 1mA
Tail lamp
ON : 24 ± 5.2 (Lux), 1.77 ± 0.08 (V)
OFF : 48 ± 10.5 (Lux), 3.47 ± 0.1 (V)
Detection illuminations
Head lamp
ON : 6 ± 1.4 (Lux), 0.63 ± 0.06 (V)
OFF : 12 ± 2.7 (Lux), 1.02 ± 0.06 (V)
DESCRIPTION
E4047CBE
The auto light control system operates by using the auto
light switch.
If you set the multi-function switch to "AUTO" position, the
tail lamp and head lamp will be turned automatically on or
off according to external illumination.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст