Hyundai Santa Fe (2006 year). Manual — part 104
ATA -174
AUTOMATIC TRANSAXLE (A5HF1)
TRANSAXLE RANGE (TR)
SWITCH
DESCRIPTION
E3E6B37C
Sensor tyep
1.
Type : ROTARY
2.
Available temperature range : -40~150 C(-40~320 F)
3.
TORQUE : 10~12Nm(1.0~1.2kgf.m, 7~8lb-ft )
Function
Detect the position of select lever through the contact switch. It makes
starting possible in "P" and "N".
1
3 2
4
5
6
7
9
8
10
C208
1. D range
3. P range
4. N range
7. R range
8. Power supply IG1
9. Start circuit
10. Start circuit
<Installation location>
SCMAT6007L
P
R
N
D
3
2
L
1
2
3
4
5
6
7
8
9
10
Terminal No.
Shift lever
SCMAT6008L
AUTOMATIC TRANSAXLE CONTROL SYSTEM
ATA -175
REMOVAL
E0EF8ADF
1.
Remove the battery terminal.
2.
Remove the battery and battery tray.
3.
Remove the air cleaner assembly(Refer to the auto-
matic transaxle-Removal/installation procedures).
4.
Disconnect the inhibitor switch connector(A).
A
SCMAT6045D
5.
Remove the control cable(A) from the manual control
lever.
A
SCMAT6046D
6.
Remove the inhibitor switch(A) and manual control
lever(B).
A
B
SCMAT6047D
INSTALLATION
E38D55AE
1.
Set the inhibitor switch to the "N" position.
2.
Set the inhibitor switch control shaft to the "N" posi-
tion.
3.
Install the inhibitor switch and manual control lever.
TORQUE
Shaft nut: 17~21Nm(1.7~2.1kgf.m, 12~15lb-ft)
Bolt(2EA): 10~12Nm(1.0~1.2kgf.m, 7~8lb-ft )
4.
Install the control cable to the manual control lever.
5.
Connect the inhibitor switch connector.
6.
Installation is the reverse of the removal.
7.
Turn the ignition switch ON after installation.
Move the shift lever from "P" range to "L" range, and
verify that the A/T gear position indicator follows the
transaxle range switch.
Body (Interior and
Exterior)
GENERAL
EXTERIOR
HOOD
TAIL GATE
FRONT DOOR
REAR DOOR
BODY SIDE MOLDINGS
SUN ROOF
MIRROR
INTERIOR
CONSOLE
CRASH PAD
ROOF TRIM
INTERIOR TRIM
WINDSHIELD GLASS
BUMPER
FRONT BUMPER
REAR BUMPER
SEAT
FRONT SEAT
REAR SEAT
SEAT BELT
BD -2
BODY (INTERIOR AND EXTERIOR)
GENERAL
SPECIFICATIONS
EA377AB9
HOOD
Type
Rear hinged, gas lifter type
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
FRONT DOOR
Locking system
Pin-fork system
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
REAR DOOR
Locking system
Pin-fork system
TRUNK LID
Type
Inner hinged, gas lifter type
Front door glass
3.5mm
GLASS THICKNESS
Rear door glass
3.5mm
Front
3 point type with Emergency Locking Retractor (E.L.R)
SEAT BELTS
Rear
3 point type with Emergency Locking Retractor (E.L.R)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст