Hyundai Kona (2022 year). Manual in english — page 15
07
Reverse Parking Distance Warning
Reverse Parking Distance
• Reverse Parking Distance Warning
Warning malfunction and
will operate when the gear is in R
precautions
(Reverse).
Reverse Parking Distance Warning
• Reverse Parking Distance Warning
malfunction
may be able to detect a person,
After starting the engine, a beep will
animal or object in the rear when the
sound when the gear is shifted to R
vehicle’s rearward speed is below 10
(Reverse) to indicate the function is
km/h (6 mph).
operating normally.
However, if one or more of the following
Distance
Warning
Warning
occurs, first check whether the ultrasonic
from object
indicator
sound
sensor is damaged or blocked with
foreign material. If it still does not work
60~120 cm
Buzzer beeps
(24~48 in.)
intermittently
properly, have the vehicle inspected by
an authorized HYUNDAI dealer.
• The audible warning does not sound.
30~60 cm
Beeps more
(12~24 in.)
frequently
• The buzzer sounds intermittently.
• The ‘Parking sensor error or blockage’
warning message appears on the
within 30 cm
Beeps
cluster.
(12 in.)
continuously
• The corresponding indicator will
illuminate whenever each ultrasonic
senor detects a person, animal or
object in its sensing range. Also an
audible warning will sound.
• When more than two objects are
detected at the same time, the closest
one will be warned with an audible
warning.
• The shape of the indicator in the
OTM070218L
illustration may differ from the actual
vehicle.
7-109
Driver assistance system
•
Reverse Parking Distance Warning
WARNINg
may malfunction when:
• Reverse Parking Distance Warning
- Heavy rain or water spray is present
is a supplemental function. The
- Water flows on the surface of the
operation of Reverse Parking
Distance Warning can be affected
sensor
by several factors (including
- Affected by another vehicle’s
environmental conditions). It is the
sensors
responsibility of the driver to always
- The sensor is covered with snow
check the rear view before and while
- Driving on uneven road, gravel
parking.
roads or bushes
• Your new vehicle warranty does not
- Objects that generates ultrasonic
cover any accidents or damage to
waves are near the sensor
the vehicle due to driver error.
- Installing the license plate
• Pay close attention when driving
differently from the original location
near objects, pedestrians, and
especially children. Some objects
- The vehicle bumper height or
may not be detected by the
ultrasonic sensor installation has
ultrasonic sensors, due to the objects
been modified
distance, size or material, all of
- Attaching equipments or
which can limit the effectiveness of
accessories around the ultrasonic
the sensor.
sensors
•
The following objects may not be
Limitations of Reverse Parking
detected:
Distance Warning
- Sharp or slim objects, such as ropes,
•
Reverse Parking Distance Warning
chains or small poles.
may not operate normally when:
- Objects, which tend to absorb
- Moisture is frozen to the sensor
sensor frequency, such as clothes,
- Sensor is covered with foreign
spongy material or snow.
material, such as snow or water
- Objects smaller than 100 cm (40 in.)
(Reverse Parking Distance Warning
in length and narrower than 14 cm
will operate normally when such
(6 in.) in diameter.
foreign material are removed.)
- Pedestrians, animals or objects
- The weather is extremely hot or cold
that are very close to the ultrasonic
- The sensor or sensor assembly is
sensors
disassembled
•
Parking Distance Warning Indicators
- The surface of the sensor has been
may be displayed differently from
subjected to a hard impact
the actual detected location when
- The surface of the sensor has been
the obstacle is located between the
scratched with a sharp object
sensors.
- The sensors or its surrounding
•
Parking Distance Warning indicator
area is directly sprayed with high
may not occur sequentially depending
pressure washer
on vehicle speed or obstacle shape.
•
If Reverse Parking Distance Warning
needs repair, have the vehicle
inspected by an authorized HYUNDAI
dealer.
7-110
07
deClaration oF ConFormity
The radio frequency components complies:
front radar
- For USA
OANATEL182
OANATEL183
7-111
Driver assistance system
- For Canada
OANATEL185
OANATEL184
7-112
07
Rear corner radar
- United States & U.S. territory,
Micronesia, Dominican Republic and
Honduras
- Canada
OANATEL002
OANATEL003
OANATEL307
7-113
8. Emergency situations
Hazard warning flasher
8-2
In case of an emergency while driving
8-2
If the engine stalls while driving
8-2
If the engine stalls at a crossroad or crossing
8-2
If you have a flat tire while driving
8-3
If the engine will not start
8-3
If the engine doesn't turn over or turns over slowly
8-3
If the engine turns over normally but doesn't start
8-3
Jump starting
8-4
If the engine overheats
8-7
Tire pressure monitoring system (TPMS) (Type A)
8-9
Low tire pressure telltale
8-10
TPMS (Tire Pressure Monitoring System) malfunction indicator
8-11
Changing a tire with TPMS
8-11
Tire pressure monitoring system (TPMS) (Type B)
8-13
Check tire pressure
8-13
Tire pressure monitoring system
8-14
Low tire pressure warning light
8-15
Low tire pressure position and tire pressure telltale
8-15
TPMS malfunction indicator
8-16
Changing a tire with TPMS
8-16
If you have a flat tire (with spare tire)
8-18
Jack and tools
8-18
Changing tires
8-19
Jack label
8-23
If you have a flat tire (with tire mobility kit)
8-24
Introduction
8-24
Components of the tire mobility kit
8-25
Using the tire mobility kit
8-26
How to adjust tire pressure
8-28
8
Notes on the safe use of the tire mobility kit
8-29
Towing
8-31
Towing service
8-31
Removable towing hook
8-32
Emergency towing
8-33
Tie-down hook
8-34
Basic troubleshooting guide
8-35
Emergency situations
Hazard warning
in case of an emergency
flasHer
wHile driving
If the engine stalls while driving
• Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
• Turn on your hazard warning flasher.
• Try to start the engine again. If your
vehicle will not start, contact an
authorized HYUNDAI dealer or seek
other qualified assistance.
OOS080006L
If the engine stalls at a crossroad
The hazard warning flasher serves as
or crossing
a warning to other drivers to exercise
extreme caution when approaching,
If the engine stalls at a crossroads or
overtaking, or passing your vehicle.
crossing, if safe to do so, shift the gear to
N (Neutral) and then push the vehicle to
It should be used whenever emergency
a safe location.
repairs are being made or when the
vehicle is stopped near the edge of a
roadway.
To turn the hazard warning flasher on
or off, press the hazard warning flasher
button with the Engine Start/Stop button
in any position. The hazard warning
flasher button is located in the center
fascia panel. All turn signal lights will
flash simultaneously.
• The hazard warning flasher operates
regardless of whether your vehicle is
running or not.
• The turn signals do not work when the
hazard flasher is on.
8-2
08
if THe engine will noT
If you have a flat tire while
sTarT
driving
If the Engine Doesn't Turn Over
If a tire goes flat while you are driving:
or Turns Over Slowly
•
Take your foot off the accelerator
• Be sure the shift lever is in N (Neutral)
pedal and let the vehicle slow down
or P (Park). The engine starts only
while driving straight ahead. Do not
when the shift lever is in N (Neutral) or
apply the brakes immediately or
P (Park).
attempt to pull off the road as this
• Check the battery connections to be
may cause loss of vehicle control
sure they are clean and tight.
resulting in an accident. When the
vehicle has slowed to such a speed
• Turn on the interior light. If the light
that it is safe to do so, brake carefully
dims or goes out when you operate
and pull off the road. Drive off the
the starter, the battery is drained.
road as far as possible and park on
Do not push or pull the vehicle to start it.
firm, level ground. If you are on a
This could cause damage to your vehicle.
divided highway, do not park in the
See instructions for "Jump Starting"
median area between the two traffic
provided in this chapter.
lanes.
•
When the vehicle is stopped, press the
CAUTION
hazard warning flasher button, move
the shift lever into P (Park), apply the
Push or pull starting the vehicle may
parking brake, and place the ignition
cause the catalytic converter to
switch in the LOCK/OFF position.
overload which can lead to damage to
the emission control system.
•
Have all passengers get out of the
vehicle. Be sure they all get out on the
side of the vehicle that is away from
If the Engine Turns Over
traffic.
Normally but Doesn't Start
•
When changing a flat tire, follow the
Check the fuel level and add fuel if
instructions provided later in this
necessary.
chapter.
If the engine still does not start, have
your vehicle checked by an authorized
HYUNDAI dealer.
8-3
Emergency situations
Jump sTarTing
Jump starting can be dangerous if done
If acid gets into your eyes, flush your
incorrectly. Follow the jump starting
eyes with clean water for at least 15
procedure in this section to avoid serious
minutes and get immediate medical
injury or damage to your vehicle. If in
attention. If acid gets on your skin,
doubt about how to properly jump start
thoroughly wash the area. If you feel
your vehicle, we strongly recommend
pain or a burning sensation, get medical
that you have a service technician or
attention immediately.
towing service do it for you.
•
When lifting a plastic-cased battery,
excessive pressure on the case may
cause battery acid to leak. Lift with a
WARNING
battery carrier or with your hands on
To prevent SERIOUS INJURY or DEATH
opposite corners.
to you or bystanders, always follow
•
Do not attempt to jump start your
these precautions when working near
vehicle if your battery is frozen.
or handling the battery:
•
NEVER attempt to recharge the
Always read and follow
battery when the vehicle’s battery
instructions carefully when
cables are connected to the battery.
handling a battery.
•
The electrical ignition system works
with high voltage.
Wear eye protection designed
NEVER touch these components
to protect the eyes from acid
with the engine running or when the
splashes.
Engine Start/Stop button is in the ON
position.
Keep all flames, sparks, or
•
Do not allow the (+) and (-) jumper
smoking materials away from
cables to touch. It may cause sparks.
the battery.
•
The battery may rupture or explode
when you jump start with a low or
Hydrogen is always present
frozen battery.
in battery cells, is highly
combustible, and may explode
if ignited.
Keep batteries out of reach of
children.
Batteries contain sulfuric acid
which is highly corrosive. Do
not allow acid to contact your
eyes, skin or clothing.
8-4
08
Jump starting procedure
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the engine compartment.
1. Position the vehicles close enough
that the jumper cables will reach, but
OOS080008N
do not allow the vehicles to touch.
5. Connect the jumper cables in
2. Avoid fans or any moving parts in the
the exact sequence shown in the
engine compartment at all times, even
illustration. First connect one jumper
when the vehicles are turned off.
cable to the red, positive (+) jumper
3. Turn off all electrical devices such as
terminal of your vehicle (1).
radios, lights, air conditioning, etc.
6. Connect the other end of the jumper
Put the vehicles in P (Park) and set the
cable to the red, positive (+) battery/
parking brake. Turn both vehicles OFF.
jumper terminal of the assisting
4. Open the engine hood.
vehicle (2).
7. Connect the second jumper cable to
the black, negative (-) battery/ chassis
ground of the assisting vehicle (3).
8. Connect the other end of the second
jumper cable to the black, negative (-)
chassis ground of your vehicle (4).
Do not allow the jumper cables to
contact anything except the correct
battery or jumper terminals or the
correct ground. Do not lean over the
battery when making connections.
8-5
Emergency situations
9. Start the engine of the assisting
Information
vehicle and let it run at approximately
2,000 rpm for a few minutes. Then
An inappropriately disposed
start your vehicle.
battery can be harmful to
the environment and human
10. Keep your vehicle operating for at
health. Dispose of the battery
least 30 minutes at idle or driving to
according to your local law(s) or
assure your battery receives enough
regulations.
charge to be able to start on its
own after the vehicle is shut off. A
complete dead battery may require
NOTICE
as long as 60 minutes runtime to fully
To prevent damage to your vehicle:
recharge it. If vehicle is run for less,
•
Only use a 12-volt power supply
the battery may not restart.
(battery or jumper system) to jump
If your vehicle will not start after a few
start your vehicle.
attempts, it probably requires servicing.
•
Do not attempt to jump start your
In this event please seek qualified
vehicle by push-starting.
assistance. If the cause of your battery
discharging is not apparent, have your
vehicle checked by an authorized
HYUNDAI dealer.
Disconnect the jumper cables in the
exact reverse order you connected them:
1. Disconnect the jumper cable from the
black, negative (-) chassis ground of
your vehicle (4).
2. Disconnect the other end of the
jumper cable from the black, negative
(-) battery/chassis ground of the
assisting vehicle (3).
3. Disconnect the second jumper cable
from the red, positive (+) battery/
jumper terminal of the assisting
vehicle (2).
4. Disconnect the other end of the
jumper cable from the red, positive (+)
jumper terminal of your vehicle (1).
8-6
08
if THe engine overHeaTs
If your temperature gauge indicates
4. Check for coolant leaking from the
overheating, you experience a loss of
radiator, hoses or under the vehicle. (If
power, or hear loud pinging or knocking,
the air conditioning had been in use, it
the engine may be overheating. If this
is normal for cold water to be draining
happens, you should:
from it when you stop.)
1.
Pull off the road and stop as soon as it
5. If engine coolant is leaking out, stop
is safe to do so.
the engine immediately and call the
2.
Place the shift lever in P (Park) and
nearest authorized HYUNDAI dealer
for assistance.
set the parking brake. If the air
conditioning is ON, turn it OFF.
3.
If engine coolant is running out under
WARNING
the vehicle or steam is coming out
Never remove the engine
from the hood, stop the engine. Do
coolant cap and/or water-
not open the hood until the coolant
cooled intercooler coolant
has stopped running or the steaming
cap or the drain plug while the
has stopped. If there is no visible
engine and radiator are hot.
loss of engine coolant and no steam,
leave the engine running and check
Hot coolant and steam may blow out
to be sure the engine cooling fan is
under pressure, causing serious injury.
operating. If the fan is not running,
Turn the engine off and wait until the
turn the engine off.
engine cools down. Use extreme care
when removing the coolant cap. Wrap
a thick towel around it, and turn it
WARNING
counterclockwise slowly to the first
While the engine is running,
stop. Step back while the pressure is
keep hands, clothing and tools
released from the cooling system. When
away from the moving parts
you are sure all the pressure has been
such as the cooling fan and
released, press down on the cap, using
drive belt to prevent serious
a thick towel, and continue turning
injury.
counterclockwise to remove it.
8-7
Emergency situations
6. If you cannot find the cause of the
overheating, wait until the engine
temperature has returned to normal.
Then, if coolant has been lost,
carefully add coolant to the reservoir
to bring the fluid level in the reservoir
up to the halfway mark.
7.
Proceed with caution, keeping alert
for further signs of overheating. If
overheating happens again, call
an authorized HYUNDAI dealer for
assistance.
CAUTION
•
Serious loss of coolant indicates a
leak in the cooling system and have
the system checked by an authorized
HYUNDAI dealer.
•
When the engine overheats from
low engine coolant, suddenly adding
engine coolant may cause cracks
in the engine. To prevent damage,
add engine coolant slowly in small
quantities. It may require several
refilling cycles to properly fill the
engine cooling system. If necessary,
an authorized HYUNDAI dealer
should be consulted to perform this
task.
8-8
08
Tire Pressure MoniToring sysTeM (TPMs) (iF eQuiPPeD)
(TyPe a)
Your vehicle has also been equipped
with a TPMS malfunction indicator
to indicate when the system is
not operating properly. The TPMS
malfunction indicator is combined with
the low tire pressure telltale. When
the system detects a malfunction, the
telltale will flash for approximately one
minute and then remain continuously
illuminated. This sequence will continue
upon subsequent vehicle start-ups as
OOS060047
long as the malfunction exists. When
the malfunction indicator is illuminated,
(1) Low tire pressure telltale /
the system may not be able to detect
TPMS malfunction indicator
or signal low tire pressure as intended.
Each tire, including the spare (if
TPMS malfunctions may occur for
provided), should be checked monthly
a variety of reasons, including the
when cold and inflated to the inflation
installation of replacement or alternate
pressure recommended by the vehicle
tires or wheels on the vehicle that
manufacturer on the vehicle placard
prevent the TPMS from functioning
or tire inflation pressure label. If your
properly. Always check the TPMS
vehicle has tires of a different size than
malfunction telltale after replacing one
the size indicated on the vehicle placard
or more tires or wheels on your vehicle to
or tire inflation pressure label, you should
ensure that the replacement or alternate
determine the proper tire inflation
tires and wheels allow the TPMS to
pressure for those tires.
continue to function properly.
As an added safety feature, your
vehicle has been equipped with a tire
NOTICE
pressure monitoring system (TPMS)
that illuminates a low tire pressure
If the TPMS indicator does not
telltale when one or more of your tires is
illuminate for 3 seconds when the
significantly under-inflated. Accordingly,
ignition switch is turned to the
when the low tire pressure telltale
ON position or engine is running,
illuminates, you should stop and check
or if it comes on after blinking for
your tires as soon as possible, and inflate
approximately one minute, take your
them to the proper pressure. Driving on
car to your nearest authorized hyundai
a significantly under-inflated tire causes
dealer and have the system checked.
the tire to overheat and can lead to tire
failure. Under-inflation also reduces
fuel efficiency and tire tread life, and
may affect the vehicle's handling and
stopping ability.
Please note that the TPMS is not a
substitute for proper tire maintenance,
and it is the driver's responsibility to
maintain correct tire pressure, even if
under-inflation has not reached the level
to trigger illumination of the TPMS low
tire pressure telltale.
8-9
Emergency situations
Low tire pressure telltale
CAUTION
In winter or cold weather, the low tire
pressure telltale may be illuminated if
When the tire pressure monitoring
the tire pressure was adjusted to the
system warning indicator is illuminated
recommended tire inflation pressure
and warning message displayed on the
in warm weather. It does not mean
cluster LCD display, one or more of your
your TPMS is malfunctioning because
tires is significantly under-inflated.
the decreased temperature leads to a
If the telltale illuminates, immediately
proportional lowering of tire pressure.
reduce your speed, avoid hard cornering
When you drive your vehicle from a
and anticipate increased stopping
warm area to a cold area or from a cold
distances. You should stop and check
area to a warm area, or the outside
your tires as soon as possible. Inflate the
temperature is greatly higher or lower,
tires to the proper pressure as indicated
you should check the tire inflation
on the vehicle’s placard or tire inflation
pressure and adjust the tires to the
pressure label located on the driver’s side
recommended tire inflation pressure.
center pillar outer panel. If you cannot
reach a service station or if the tire
cannot hold the newly added air, replace
WARNING
the low pressure tire with the spare tire.
Low pressure damage
Then the Low Tire Pressure telltale may
flash for approximately one minute and
Significantly low tire pressure makes
then remain continuously illuminated
the vehicle unstable and can contribute
after restarting and about 10 minutes of
to loss of vehicle control and increased
continuous driving before you have the
braking distances.
low pressure tire repaired and replaced
Continued driving on low pressure tires
on the vehicle.
can cause the tires to overheat and fail.
8-10
08
TPMS (Tire Pressure
Changing a tire with TPMS
Monitoring System)
If you have a flat tire, the Low Tire
malfunction indicator
Pressure will come on. Have the flat tire
The TPMS malfunction indicator
repaired by an authorized HYUNDAI
will illuminate after it blinks for
dealer as soon as possible or replace the
approximately one minute when there
flat tire with the spare tire.
is a problem with the Tire Pressure
Monitoring System. If the system is able
CAUTION
to correctly detect an under inflation
warning at the same time as system
Never use a puncture-repairing agent
failure then it will illuminate the TPMS
not approved by HYUNDAI to repair
malfunction indicator.
and/or inflate a low pressure tire. The
Have the system checked by an
tire sealant not approved by HYUNDAI
authorized HYUNDAI dealer as soon as
may damage the tire pressure sensor.
possible to determine the cause of the
The sealant on the tire pressure sensor
problem.
and wheel shall be eliminated when you
replace the tire with a new one.
CAUTION
Each wheel is equipped with a tire
•
The TPMS malfunction indicator
pressure sensor mounted inside
may be illuminated if the vehicle is
the tire behind the valve stem. You
moving around electric power supply
must use TPMS specific wheels. It is
cables or radios transmitter such as
recommended that you always have your
at police stations, government and
tires serviced by an authorized HYUNDAI
public offices, broadcasting stations,
dealer.
military installations, airports, or
Even if you replace the low pressure tire
transmitting towers, etc. This can
with the spare tire, the Low Tire Pressure
interfere with normal operation of
Telltale will blink or remain on until the
the Tire Pressure Monitoring System
low pressure tire is repaired and placed
(TPMS).
on the vehicle.
•
The TPMS malfunction indicator may
After you replace the low pressure tire
illuminate if snow chains or some
with the spare tire, the Low Tire Pressure
separately purchased devices such
Telltale may blink or illuminate after
as notebook computers, mobile
driving about 20 minutes because the
charger, remote starter, navigation
TPMS sensor mounted on the spare
etc. are used in the vehicle. This can
wheel is not initiated.
interfere with normal operation of
the Tire Pressure Monitoring System
Once the low pressure tire is reinflated to
the recommended pressure and installed
(TPMS).
on the vehicle or the TPMS sensor
mounted on the replaced spare wheel
is initiated by an authorized HYUNDAI
dealer, the TPMS malfunction indicator
and the low tire pressure telltale will
extinguish within a few minutes of
driving.
If the indicator is not extinguished after
a few minutes of driving, please visit an
authorized HYUNDAI dealer.
8-11
Emergency situations
CAUTION
WARNING
If original mounted tire is replaced
TPMS
with the spare tire, the TPMS sensor
• The TPMS cannot alert you to severe
on the replaced spare wheel should
and sudden tire damage caused by
be initiated and the TPMS sensor on
external factors such as nails or road
the original mounted wheel should
debris.
be deactivated by a HYUNDAI dealer.
• If you feel any vehicle instability,
If the TPMS sensor on the original
immediately take your foot off
mounted wheel located in the spare tire
the accelerator, apply the brakes
carrier still activates, the tire pressure
gradually and with light force, and
monitoring system may not operate
slowly move to a safe position off the
properly. Have the tire with TPMS
road.
serviced or replaced by an authorized
hyundai dealer.
WARNING
You may not be able to identify a low tire
Protecting TPMS
by simply looking at it. Always use a good
quality tire pressure gauge to measure
Tampering with, modifying, or disabling
the tire's inflation pressure. Please note
the Tire Pressure Monitoring System
that a tire that is hot (from being driven)
(TPMS) components may interfere
will have a higher pressure measurement
with the system's ability to warn the
than a tire that is cold.
driver of low tire pressure conditions
and/or TPMS malfunctions. Tampering
A cold tire means the vehicle has been
with, modifying, or disabling the Tire
sitting for 3 hours and driven for less
Pressure Monitoring System (TPMS)
than 1.6 km (1 mile) in that 3 hour period.
components may void the warranty for
Allow the tire to cool before measuring
that portion of the vehicle.
the inflation pressure. Always be sure
the tire is cold before inflating to the
recommended pressure.
Information
This device complies with Industry
Canada RSS-210 standard.
CAUTION
Operation is subject to the following three
Do not use any tire sealant except the
conditions:
Tire Mobility Kit approved by HYUNDAI
if your vehicle is equipped with a Tire
1. This device may not cause harmful
Pressure Monitoring System. The liquid
interference.
sealant can damage the tire pressure
2. This device must accept any
sensors.
interference received, including
interference that may cause undesired
operation.
3. Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
8-12
08
Tire Pressure MoniToring sysTeM (TPMs) (iF eQuiPPeD)
(TyPe B)
Check tire pressure
OOS060047
OOS080005L
•
You can check the tire pressure in the
Warning mode on the cluster.
Refer to the “LCD Display Modes” in
chapter 4.
•
Tire pressure is displayed after a few
minutes of driving after initial engine
start up.
•
If tire pressure is not displayed when
the vehicle is stopped, “Drive to
OOS047115L
display” message will appear. After
(1) Low Tire Pressure Telltale/TPMS
driving, check the tire pressure.
Malfunction Indicator
•
The displayed tire pressure values may
(2) Low Tire Pressure Position Telltale
differ from those measured with a tire
and Tire Pressure Telltale (Shown on
pressure gauge.
the LCD display)
•
You can change the tire pressure unit
in the User Settings mode on the
instrument cluster.
- psi, kpa, bar (Refer to “LCD Modes”
in chapter 4).
8-13
Emergency situations
Tire pressure monitoring system
Your vehicle has also been equipped with
a TPMS malfunction indicator to indicate
when the system is not operating
WARNING
properly. The TPMS malfunction
indicator is combined with the low
Over-inflation or under-inflation can
tire pressure telltale. When the system
reduce tire life, adversely affect vehicle
detects a malfunction, the telltale will
handling, and lead to sudden tire failure
flash for approximately one minute and
that may cause loss of vehicle control
then remain continuously illuminated.
resulting in an accident.
This sequence will continue upon
subsequent vehicle start-ups as long as
Each tire, including the spare (if
the malfunction exists.
provided), should be checked monthly
When the malfunction indicator is
when cold and inflated to the inflation
pressure recommended by the vehicle
illuminated, the system may not be able
to detect or signal low tire pressure as
manufacturer on the vehicle placard
or tire inflation pressure label. (If your
intended. TPMS malfunctions may occur
for a variety of reasons, including the
vehicle has tires of a different size than
the size indicated on the vehicle placard
installation of replacement or alternate
tires or wheels on the vehicle that
or tire inflation pressure label, you should
determine the proper tire inflation
prevent the TPMS from functioning
properly.
pressure for those tires.)
Always check the TPMS malfunction
As an added safety feature, your
vehicle has been equipped with a tire
telltale after replacing one or more tires
or wheels on your vehicle to ensure that
pressure monitoring system (TPMS)
that illuminates a low tire pressure
the replacement or alternate tires and
wheels allow the TPMS to continue to
telltale when one or more of your tires is
significantly under-inflated. Accordingly,
function properly.
when the low tire pressure telltale
illuminates, you should stop and check
NOTICE
your tires as soon as possible, and inflate
If any of the below happens, have
them to the proper pressure. Driving on
the system checked by an authorized
a significantly under-inflated tire causes
HYUNDAI dealer.
the tire to overheat and can lead to tire
failure.
1. The Low Tire Pressure Telltale/ TPMS
Malfunction Indicator does not
Under-inflation also reduces fuel
illuminate for 3 seconds when the
efficiency and tire tread life, and may
Engine Start/Stop button is pressed
affect the vehicle’s handling and
to the ON position or when the
stopping ability.
engine is running.
Please note that the TPMS is not a
2. The TPMS Malfunction Indicator
substitute for proper tire maintenance,
remains illuminated after blinking for
and it is the driver’s responsibility to
approximately 1 minute.
maintain correct tire pressure, even if
under-inflation has not reached the level
3. The Low Tire Pressure Position
to trigger illumination of the TPMS low
Telltale remains illuminated.
tire pressure telltale.
8-14
08
Low tire pressure
If you cannot reach a service station or
warning light
if the tire cannot hold the newly added
air, replace the low pressure tire with the
spare tire.
Low tire pressure position and
The Low Tire Pressure Telltale will remain
tire pressure telltale
on and the TPMS Malfunction Indicator
may blink for one minute and then
remain illuminated (when the vehicle
is driven approximately 10 minutes at
speed above 25 km/h (15.5 mph)) until
you have the low pressure tire repaired
and replaced on the vehicle.
CAUTION
In winter or cold weather, the Low Tire
Pressure Telltale may be illuminated if
the tire pressure was adjusted to the
OOS047115L
recommended tire inflation pressure
When the tire pressure monitoring
in warm weather. It does not mean
system warning indicators are
your TPMS is malfunctioning because
illuminated and a warning message
the decreased temperature leads to a
displayed on the cluster LCD display,
proportional lowering of tire pressure.
one or more of your tires is significantly
When you drive your vehicle from a
under-inflated. The Low Tire Pressure
warm area to a cold area or from a cold
Position Telltale will indicate which
area to a warm area, or the outside
tire is significantly underinflated by
temperature is greatly higher or lower,
illuminating the corresponding position
you should check the tire inflation
light.
pressure and adjust the tires to the
If either telltale illuminates, immediately
recommended tire inflation pressure.
reduce your speed, avoid hard cornering
and anticipate increased stopping
distances. You should stop and check
WARNING
your tires as soon as possible. Inflate the
Low pressure damage
tires to the proper pressure as indicated
on the vehicle’s placard or tire inflation
Significantly low tire pressure makes
pressure label located on the driver’s
the vehicle unstable and can contribute
side center pillar outer panel.
to loss of vehicle control and increased
braking distances.
Continued driving on low pressure tires
can cause the tires to overheat and fail.
8-15
Emergency situations
TPMS malfunction
Changing a tire with TPMS
indicator
If you have a flat tire, the Low Tire
Pressure and Position telltales will come
The TPMS Malfunction Indicator
on. Have the flat tire repaired by an
will illuminate after it blinks for
authorized HYUNDAI dealer as soon as
approximately one minute when there
possible or replace the flat tire with the
is a problem with the Tire Pressure
spare tire.
Monitoring System.
Have the system checked by an
NOTICE
authorized HYUNDAI dealer as soon as
It is recommended that you do not
possible.
use a puncture-repairing agent not
approved by HYUNDAI dealer or the
NOTICE
equivalent specified for your vehicle to
If there is a malfunction with the
repair and/or inflate a low pressure tire.
Tire sealant not approved by HYUNDAI
TPMS, the individual tire pressures
in the cluster LCD display will not be
dealer or the equivalent specified for
your vehicle may damage the tire
available. Have the system checked by
an authorized HYUNDAI dealer as soon
pressure sensor.
as possible.
The spare tire (if equipped) does not
come with a tire pressure monitoring
NOTICE
sensor. When the low pressure tire or
The TPMS Malfunction Indicator may
the flat tire is replaced with the spare
illuminate after blinking for one minute
tire, the Low Tire Pressure Telltale will
if the vehicle is near electric power
remain on. Also, the TPMS Malfunction
supply cables or radio transmitters
Indicator will illuminate after blinking
such as police stations, government
for one minute if the vehicle is driven
and public offices, broadcasting
at speed above 25 km/h (15.5 mph) for
stations, military installations, airports,
approximately 10 minutes.
transmitting towers, etc.
Once the original wheel equipped with
Additionally, the TPMS Malfunction
a tire pressure monitoring sensor is
Indicator may illuminate if snow chains
reinflated to the recommended pressure
are used or electronic devices such as
and reinstalled on the vehicle, the
computers, chargers, remote starters,
Low Tire Pressure Telltale and TPMS
navigation, etc. This may interfere with
Malfunction Indicator will go off within a
normal operation of the TPMS.
few minutes of driving.
8-16
08
If the indicators do not extinguish after a
WARNING
few minutes, please visit an authorized
HYUNDAI dealer.
Tampering with, modifying, or disabling
the Tire Pressure Monitoring System
Each wheel is equipped with a tire
(TPMS) components may interfere
pressure sensor mounted inside the tire
with the system’s ability to warn the
behind the valve stem (except for the
driver of low tire pressure conditions
spare tire). You must use TPMS specific
and/or TPMS malfunctions. Tampering
wheels. It is recommended that you
with, modifying, or disabling the Tire
always have your tires serviced by an
Pressure Monitoring System (TPMS)
authorized HYUNDAI dealer.
components may void the warranty for
You may not be able to identify a tire
that portion of the vehicle.
with low pressure by simply looking at it.
Always use a good quality tire pressure
gauge to measure. Please note that a tire
Information
that is hot (from being driven) will have a
This device complies with Industry
higher pressure measurement than a tire
Canada RSS-210 standard.
that is cold.
Operation is subject to the following three
A cold tire means the vehicle has been
conditions:
sitting for 3 hours and driven for less
than 1.6 km (1 mile) in that 3 hour period.
1. This device may not cause harmful
interference.
Allow the tire to cool before measuring
2. This device must accept any
the inflation pressure. Always be sure
interference received, including
the tire is cold before inflating to the
interference that may cause undesired
recommended pressure.
operation.
3. Changes or modifications not expressly
WARNING
approved by the party responsible
• The TPMS cannot alert you to severe
for compliance could void the user’s
and sudden tire damage caused by
authority to operate the equipment.
external factors such as nails or road
debris.
• If you feel any vehicle instability,
immediately take your foot off
the accelerator, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.
8-17
Emergency situations
iF you have a FlaT Tire (wiTh sPare Tire, iF eQuiPPeD)
WARNING
Changing a tire can be dangerous.
Follow the instructions in this section
when changing a tire to reduce the risk
of serious injury or death.
CAUTION
Be careful as you use the jack handle to
stay clear of the flat end. The flat end
has sharp edges that could cause cuts.
OOS067036L
Turn the winged hold down bolt
Jack and tools
counterclockwise to remove the spare
tire.
Store the spare tire in the same
compartment by turning the winged hold
down bolt clockwise.
To prevent the spare tire and tools from
"rattling", store them in their proper
location.
OOS080014L
(1) Jack handle
(2) Jack
(3) Wheel nut wrench
(4) Towing hook
The jack, jack handle, and wheel nut
wrench are stored in the luggage
OOS067040
compartment under the luggage box
If it is hard to loosen the tire hold-down
cover.
wing bolt by hand, you can loosen it
The jack is provided for emergency tire
easily using the wheel nut wrench.
changing only.
Turn the tire hold-down wing bolt
counterclockwise with the wheel nut
wrench.
8-18
08
Changing tires
Follow these steps to change your
vehicle’s tire:
1. Park on a level, firm surface.
WARNING
2. Move the shift lever into P (Park),
A vehicle can slip or roll off of a jack
apply the parking brake, and place
causing serious injury or death to you or
the ignition switch in the LOCK/OFF
those nearby. Take the following safety
position.
precautions:
3. Press the hazard warning flasher
•
Do not get under a vehicle that is
button.
supported by a jack.
4. Remove the wheel lug wrench, jack,
•
NEVER attempt to change a tire in
jack handle, and spare tire from the
the lane of traffic. ALWAYS move the
vehicle.
vehicle completely off the road on
level, firm ground away from traffic
before trying to change a tire. If you
cannot find a level, firm place off
the road, call a towing service for
assistance.
•
Be sure to use the jack provided with
the vehicle.
•
ALWAYS place the jack on the
designated jacking positions on the
vehicle and NEVER on the bumpers
or any other part of the vehicle for
jacking support.
OOS080007N
[A] : Block
•
Do not start or run the engine while
the vehicle is on the jack.
5. Block both the front and rear of the
tire diagonally opposite of the tire you
•
Do not allow anyone to remain in the
are changing.
vehicle while it is on the jack.
•
Keep children away from the road
and the vehicle.
8-19
Emergency situations
OOS067017
OOS067020
6. Loosen the wheel lug nuts
8. Insert the jack handle into the jack
counterclockwise one turn each in
and turn it clockwise, raising the
the order shown above, but do not
vehicle until the tire clears the ground.
remove any lug nuts until the tire has
Make sure the vehicle is stable on the
een raised off of the ground.
jack.
9. Loosen the lug nuts with the wheel
lug nut wrench and remove them with
your fingers. Remove the wheel from
the studs and lay it flat on the ground
out of the way. Remove any dirt or
debris from the studs, mounting
surfaces, and wheel.
Front
Rear
10. Install the spare tire onto the studs of
the hub.
11. Tighten the lug nuts with your fingers
onto the studs with the smaller end of
OOS067018
the lug nuts closest to the wheel.
12. Lower the vehicle to the ground
7. Place the jack at the designated
by turning the jack handle
jacking position under the frame
counterclockwise.
closest to the tire you are changing.
The jacking positions are plates
13. Use the wheel lug nut wrench to
welded to the frame with two
tighten the lug nuts in the order
notches. Never jack at any other
shown. Double-check each lug nut
position or part of the vehicle. Doing
until they are tight. After changing
so may damage the side seal molding
tires, have an authorized HYUNDAI
or other parts of the vehicle.
dealer tighten the lug nuts to their
proper torque as soon as possible.
The wheel lug nut should be
tightened to 11~13 kgf·m (79~94
lbf·ft).
8-20
08
CAUTION
Your vehicle has metric threads on the
studs and wheel bolts. Make certain
during tire changing that the same bolts
that were removed are reinstalled. If
you have to replace your wheel bolts
make sure they have metric threads to
avoid damaging the studs and ensure
the wheel is properly secured to the
hub. Consult an authorized HYUNDAI
dealer for assistance.
OOS067019L
If you have a tire gauge, check the
If any of the equipment such as the jack,
tire pressure (see “Tires and Wheels”
wheel bolts, studs, or other equipment
section in chapter 2 for tire pressure
is damaged or in poor condition, do not
instructions.). If the pressure is lower or
attempt to change the tire and call for
higher than recommended, drive slowly
assistance.
to the nearest service station and adjust
it to the recommended pressure. Always
Use of compact spare tires
reinstall the valve cap after checking
(if equipped)
or adjusting tire pressure. If the cap
is not replaced, air may leak from the
Compact spare tires are designed for
tire. If you lose a valve cap, buy another
emergency use only. Drive carefully on
and install it as soon as possible. After
the compact spare tire and always follow
changing tires, secure the flat tire and
the safety precautions.
return the jack and tools to their proper
storage locations.
WARNING
NOTICE
To prevent compact spare tire failure
and loss of control possibly resulting in
• Check the tire pressure as soon
an accident:
as possible after installing a spare
• Use the compact spare tire only in an
tire. Adjust it to the recommended
emergency.
pressure.
• NEVER operate your vehicle over 80
• Check and tighten the wheel lug nuts
km/h (50 mph).
after driving over 30 mile (50 km) if
tires are replaced. Recheck the tire
• Do not exceed the vehicle’s
wheel lug nuts after driving over 620
maximum load rating or the load
mile (1,000 km).
carrying capacity shown on the
sidewall of the compact spare tire.
• Do not use the compact spare tire
continuously. Repair or replace the
original tire as soon as possible to
avoid failure of the compact spare
tire.
8-21
Emergency situations
When driving with the compact spare tire
Information
mounted to your vehicle:
When the original tire and wheel are
•
Check the tire pressure after installing
repaired and reinstalled on the vehicle, the
the compact spare tire. The compact
wheel bolt torque must be set correctly.
spare tire should be inflated to 420
The correct wheel bolt tightening torque is
kPa (60 psi).
11~13 kgf.m (79~94 lbf.ft).
•
Do not take this vehicle through
an automatic car wash while the
NOTICE
compact spare tire is installed.
•
Do not use the compact spare tire on
To prevent damaging the compact
any other vehicle because this tire
spare tire and your vehicle:
has been designed especially for your
• Drive slowly enough for the road
vehicle.
conditions to avoid all hazards, such
•
The compact spare tire’s tread life is
as a potholes or debris.
shorter than a regular tire. Inspect
• Avoid driving over obstacles. The
your compact spare tire regularly and
compact spare tire diameter is
replace worn compact spare tires with
smaller than the diameter of a
the same size and design, mounted on
conventional tire and reduces the
the same wheel.
ground clearance approximately 25
•
Do not use more than one compact
mm (1 inch).
spare tire at a time.
• Do not use tire chains on the
•
Do not tow a trailer while the compact
compact spare tire. Because of the
spare tire is installed.
smaller size, a tire chain will not fit
properly.
• Do not use the compact spare tire
on any other wheels, nor should
standard tires, snow tires, wheel
covers or trim rings be used with the
compact spare wheel.
8-22
08
Jack label
OOS067043
The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
1. Model Name
2. Maximum allowable load
3. When using the jack, set your parking brake.
4. When using the jack, stop the engine.
5. Do not get under a vehicle that is supported by a jack.
6. The designated locations under the frame
7. When supporting the vehicle, the base plate of jack must be vertical under the
lifting point.
8. Shift into Reverse gear on vehicles with manual transmission or shift the gear to the
P position on vehicles with automatic transmission.
9. The jack should be used on firm level ground.
10. Jack manufacture
11. Production date
12. Representative company and address
8-23
Emergency situations
iF you have a FlaT Tire (wiTh Tire MoBiliTy KiT,
iF eQuiPPeD)
Introduction
With the Tire Mobility Kit you stay mobile
even after experiencing a tire puncture.
The compressor and sealing compound
system effectively and comfortably seals
most punctures in a passenger car tire
caused by nails or similar objects and
reinflates the tire.
After you ensure that the tire is properly
sealed you can drive cautiously on the
OOS080001K
tire (distance up to 200 km (120 miles))
at a max. speed of (80 km/h (50 mph))
For safe operation, carefully read and
in order to reach a service station or tire
follow the instructions in this manual
dealer for the tire replacement.
before use.
It is possible that some tires, especially
(1) Compressor
with larger punctures or damage to the
(2) Sealant bottle
sidewall, cannot be sealed completely.
The Tire Mobility Kit is a temporary fix to
Air pressure loss in the tire may adversely
the tire and the tire should be inspected
affect tire performance.
by an authorized HYUNDAI dealer as
For this reason, you should avoid abrupt
soon as possible.
steering or other driving maneuvers,
especially if the vehicle is heavily loaded
CAUTION
or if a trailer is in use.
When two or more tires are flat, do not
The Tire Mobility Kit is not designed
use the tire mobility kit because the
or intended as a permanent tire repair
supported one sealant of Tire Mobility
method and is to be used for one tire
Kit is only used for one flat tire.
only.
This instruction shows you step by step
how to temporarily seal the puncture
WARNING
simply and reliably.
Do not use the Tire Mobility Kit to repair
Read the section “Notes on the safe use
punctures in the tire walls. This can
of the Tire Mobility Kit”.
result in an accident due to tire failure.
WARNING
WARNING
Do not use the TMK if a tire is severely
Have your tire repaired as soon as
damaged by driving run flat or with
possible. The tire may lose air pressure
insufficient air pressure.
at any time after inflating with the Tire
Only punctured areas located within the
Mobility Kit.
tread region of the tire can be sealed
using the TMK.
8-24
08
Components of the Tire Mobility Kit
ODE067044
1. Speed-restriction label
2. Sealant bottle and label with speed restriction
3. Filling hose
4. Connectors and cable for the power outlet direct connection
5. Holder for the sealant bottle
6. Compressor
7. ON/OFF switch
8. Pressure gauge for displaying the tire inflation pressure
9. Button for reducing the tire inflation pressure
Connectors, cable and connection hose are stored in the compressor housing.
Strictly follow the specified sequence, otherwise the sealant may escape under high
pressure.
8-25
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст