Chrysler PT Cruiser. Manual — part 938
INSTALLATION
(1) Place bolster into vehicle.
(2) Install right and left seat belt through bolster
assembly.
(3) Install both bezels at seat belt through holes in
headrest assembly.
(4) Install two screws from the rear attaching
upper bolster assembly to rear seat back panel (Fig.
249).
(5) Install two screws from front side upper bolster
assembly to rear seat back panel (Fig. 250).
(6) Install push pin fasteners attaching molding
upper seat belt to top well.
(7) Install right rear seat belt lower anchor.
(8) Install left rear seat belt lower anchor.
(9) Place rear seats in the upright position.
(10) Raise convertible top.
Fig. 247 REAR SEAT BOLSTER
1 - REAR SEAT BOLSTER ATTACHING SCREW(S)
2 - REAR SEAT BOLSTER
3 - REAR SEAT BACK PANEL
Fig. 248 REAR SEAT BOLSTER REAR ATTACHING
SCREWS
1 - REAR SEAT BOLSTER
2 - REAR SEAT BACK PANEL
3 - ATTACHING SCREW(S)
Fig. 249 REAR SEAT BOLSTER REAR ATTACHING
SCREWS
1 - REAR SEAT BOLSTER
2 - REAR SEAT BACK PANEL
3 - ATTACHING SCREW(S)
Fig. 250 REAR SEAT BOLSTER
1 - REAR SEAT BOLSTER ATTACHING SCREW(S)
2 - REAR SEAT BOLSTER
3 - REAR SEAT BACK PANEL
23 - 210
SEATS
PT
REAR SEAT BOLSTER - PT-27 (Continued)
REAR SEAT BOLSTER COVER -
PT-27
REMOVAL
(1) Remove rear seat bolster from vehicle. (Refer to
23
-
BODY/SEATS/REAR
SEAT
BOLSTER
-
REMOVAL).
(2) Remove the two bolster mounting brackets
(Fig. 251).
(3) Remove
push
pin
fasteners
from
upper
retainer.
(4) Cut three hog rings attaching cover together
(Fig. 252).
(5) Remove cover from foam.
INSTALLATION
(1) Install bolster cover onto the foam
(2) Install three hog rings attaching cover together
(Fig. 253).
(3) Install push pin fasteners attaching upper
retainer.
(4) Install the two bolster mounting brackets (Fig.
254).
(5) Install rear seat bolster into vehicle. (Refer to
23
-
BODY/SEATS/REAR
SEAT
BOLSTER
-
INSTALLATION).
Fig. 251 BOLSTER - MOUNTING BRACKET
Fig. 252 BOLSTER COVER
1 - HOG RINGS
Fig. 253 BOLSTER COVER
1 - HOG RINGS
Fig. 254 BOLSTER - MOUNTING BRACKET
PT
SEATS
23 - 211
REAR SEAT CUSHION
REMOVAL
REMOVAL
(1) Remove seat from vehicle.
(2) Remove rear seat cushion side shields.
(3) Remove seat back.
(4) Remove rear seat and track assembly.
(5) Disengage J-strap attaching seat cover from
the seat cushion frame.
(6) Pull cover off to the hog rings.
(7) Cut hog rings attaching seat cover to seat cush-
ion pad.
(8) Remove seat cushion cover from seat cushion.
REMOVAL - PT-27 ONLY
(1) Remove seat from vehicle (Refer to 23 - BODY/
SEATS/SEAT - REMOVAL).
(2) Remove rear seat back (Refer to 23 - BODY/
SEATS/REAR SEAT BACK - REMOVAL).
(3) Remove seat cushion.
INSTALLATION
INSTALLATION
(1) Position seat cover on cushion.
(2) Align seat cover with cushion alignment inden-
tations.
(3) Install hog rings.
(4) Engage J-strap attaching seat cover to cushion
frame.
(5) Install rear seat and track assembly. Tighten
front track to pan bolts to 12 N·m (9 ft. lbs.) torque.
(6) Install seat back.
(7) Install rear seat cushion side shields.
(8) Install seat in vehicle.
INSTALLATION - PT-27 ONLY
(1) Place seat cushion position.
(2) Install seat back. (Refer to 23 - BODY/SEATS/
REAR SEAT BACK - INSTALLATION).
(3) Install seat in vehicle. (Refer to 23 - BODY/
SEATS/REAR SEAT - INSTALLATION).
REAR SEAT BACK CUSHION /
COVER
REMOVAL
(1) Remove seat from vehicle.
(2) Remove rear seat cushion side shields.
(3) Remove seat back.
(4) Remove track assembly.
(5) Disengage J-strap attaching seat cover from
the seat cushion frame.
(6) Pull cover off to the hog rings.
(7) Cut hog rings attaching seat cover to seat cush-
ion pad.
(8) Remove seat cushion cover from seat cushion.
INSTALLATION
(1) Position seat cover on cushion.
(2) Align seat cover with cushion alignment inden-
tations.
(3) Install hog rings.
(4) Engage J-strap attaching seat cover to front of
seat cushion frame.
(5) Install track assembly. Tighten front track to
pan bolts to 12 N·m (9 ft. lbs.) torque.
(6) Install seat back.
(7) Install rear seat cushion side shields.
(8) Install seat in vehicle.
REAR SEAT LATCH COVER
REMOVAL
(1) Fold the rear seats forward.
(2) Press the locking tabs down on each side of the
latch cover (Fig. 255).
(3) Slide the latch cover forward to remove it from
the latch (Fig. 256).
(4) Remove latch cover from vehicle.
Fig. 255 REAR SEAT LATCH COVER
1 - LOCKING TAB
23 - 212
SEATS
PT
INSTALLATION
(1) Place latch cover in front of the latch (Fig.
257).
(2) Slide the latch cover rearward on to the latch.
(3) Ensure locking tabs are locked into position
(Fig. 258).
(4) Fold the rear seats rearward into position.
UNDER SEAT STORAGE BIN
REMOVAL
(1) Open cargo bin.
(2) Pull cargo bin out until it reaches the end of
the guide (Fig. 259).
(3) Lift upward on cargo bin and remove.
Fig. 256 REAR SEAT LATCH AND COVER
Fig. 257 REAR SEAT LATCH AND COVER
Fig. 258 REAR SEAT LATCH COVER
1 - LOCKING TAB
Fig. 259 CARGO BIN
1 - CARGO BIN TRACK
2 - CARGO BIN
3 - SEAT TRIM
PT
SEATS
23 - 213
REAR SEAT LATCH COVER (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст