Chrysler Le Baron, Dodge Dynasty, Plymouth Acclaim. Manual — part 104
GEARSHIFT HOUSING
Roll pin must be flush with top of lever.
Fig. 1 Gearshift Housing Disassembled
Fig. 2 Remove or Install Roll Pin and Lever
Fig. 3 Dust Boot
Ä
TRANSAXLE
21 - 21
The C-Clip groves in the selector shaft will
damage the oil seal. Install oil seal after selector
shaft is installed. Always use a new oil seal when
selector shaft is removed.
Proper torque to the 5-R blocker attaching
bolts is very important (Fig. 8).
Fig. 4 Remove Oil Seal
Fig. 5 Install Oil Seal
Fig. 6 Remove Vent Cap
Fig. 7 Crossover Shaft Roll Pin
Fig. 8 5-R Blocker Attaching Bolts
Fig. 9 5-R Blocker Assembly
21 - 22
TRANSAXLE
Ä
For Disassembly: Drive roll pin out far enough
to clear the selector shaft, but not through. The
pin must remain in the selector so not to break
the housing.
Fig. 10 Crossover Shaft
Fig. 11 Selector Shaft C-Clip
Fig. 12 Selector Shaft C-Clip
Fig. 13 Selector Assembly Roll Pin
Fig. 14 Remove or Install Selector Shaft
Fig. 15 Disassembled View
Ä
TRANSAXLE
21 - 23
DIFFERENTIAL BEARING RETAINER
Fig. 1 Remove Differential Bearing Retainer Seal
Fig. 2 Install Differential Bearing Retainer Seal
Fig. 3 Remove Differential Bearing Retainer Cup
Fig. 4 Differential Bearing Retainer
Fig. 5 Install Oil Baffle
Fig. 6 Insert (Select) Shim and Differential Bearing
Retainer Cup
21 - 24
TRANSAXLE
Ä
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст