Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1506
4. Install oil pan while aligning the oil level indicator
tube and attach fasteners using the following tight-
ening sequence:
a. Install oil pan bolts and nuts finger tight
only—just tight enough to compress the
gasket’s rubber seal. Line up front of oil
pan to be flush with front face of block.
b. Install lower timing chain cover bolts (1) and
tighten to 12 N·m (105 in. lbs.).
c. Tighten oil pan bolts to 28 N·m (250 in. lbs.).
d. Tighten oil pan nuts to 12 N·m (105 in. lbs.).
5. Install lower bolt attaching the A/C compressor to
oil pan (2). Tighten bolt to 28 N·m (21 ft. lbs.).
6. Install lower bolt attaching the alternator bracket to
oil pan (1). Tighten bolt to 28 N·m (21 ft. lbs.).
7. Install oil filter (3) and drain plug (5).
8. Install structural collar (Refer to 9 - ENGINE/EN-
GINE
BLOCK/STRUCTURAL
COVER
-
INSTALLATION).
9 - 2048
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
9. Position steering gear (2) in place and install
mounting bolts (1). Tighten bolts (1) to 70 N·m (95
ft. lbs.).
10. Install the steering coupling (2) lower pinch bolt
(1) at the gear (3) using a new bolt (1). Tighten
to 30 N·m (22 ft.lbs.) (Refer to 19 - STEERING/
COLUMN/STEERING
COUPLING
-
INSTALLATION).
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2049
11. Connect electrical connector (1) to steering gear
(2).
12. Install power steering line support (2) and tighten.
13. Install lower spalsh shield (2) and retaining bolts
(1).
14. Lower vehicle.
9 - 2050
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
15. Install engine oil level indicator (4).
16. Fill engine crankcase (5) with proper oil to correct
level.
17. Connect negative battery (1) cable.
18. Start engine and check for leaks.
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2051
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст