Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1722
CROSSMEMBER-ENGINE CRADLE
REMOVAL
1. Disconnect and isolate battery negative cable (2)
from battery post. (Refer to 8 - ELECTRICAL/BAT-
TERY SYSTEM - STANDARD PROCEDURE).
2. Siphon power steering fluid from pump reservoir.
3. Raise and support the vehicle. (Refer to LUBRICA-
TION & MAINTENANCE/HOISTING - STANDARD
PROCEDURE)
1 - DRIVE ON LIFT
2 - SAE HOISTING SYMBOLS
2 - FRAME CONTACT LIFT (SINGLE POST)
2 - CHASSIS LIFT (DUAL LIFT)
2 - OUTBOARD LIFT (DUAL LIFT)
2 - FLOOR JACK
3 - HOISTING PADS
3 - FRAME CONTACT LIFT (SINGLE POST)
3 - CHASSIS LIFT (DUAL LIFT)
3 - OUTBOARD LIFT (DUAL LIFT)
3 - FLOOR JACK
13 - 88
FRAME & BUMPERS
LX
4. Remove the left and right front wheels (1). (Refer
to 22 - TIRES/WHEELS - REMOVAL)
5. Remove outer tie rod (2) end nut (1) at each
knuckle (3).
6. Using Remover (2), Special Tool 9630, separate
outer tie rod (1) from each knuckle.
LX
FRAME & BUMPERS
13 - 89
7. On each side of vehicle, remove nut (5) fastening
stabilizer link (3) to stabilizer bar (4). Slide link ball
joint stem (1) from bar.
8. Back off nut (3) from bolt (1) attaching shock clevis
bracket (2) to lower control arm (7) until it is flush
with end of bolt.
9. Using a brass drift punch, tap the bolt out of the
clevis bracket until bolt serrations clear bracket.
10. Remove nut (3) and bolt (1) for clevis bracket and
control arm.
11. Install engine support tool #8534.
12. Remove upper airbox inlet tube.
13. Install left and right engine lift bracket to cylinder
head.
14. Remove the front belly pan. (Refer to 23 - BODY/
EXTERIOR/BELLY PAN - REMOVAL)
13 - 90
FRAME & BUMPERS
LX
15. Remove two pressure line retainer bolts (1) from
cradle (2).
16. Remove mounting screws, then heat shield (3)
above each inner tie rod bellows (2).
17. Remove steering gear upper mounting bolt (4)
and nut.
18. Remove steering gear lower mounting bolts (2
and 3).
19. Remove steering gear (1) and support from the
exhaust system.
LX
FRAME & BUMPERS
13 - 91
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст