Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1826
8. Loosen at least one clockspring screw (1) to pre-
vent the clockspring from unwinding.
9. Back out the set screw (1) through the access hole
(3) in the steering column control module (SCCM)
(2) securing the multi-function SCCM assembly.
10. Pull the SCCM assembly (1) off the steering col-
umn shaft.
19 - 122
COLUMN SERVICE INFORMATION
LX
11. Disconnect the 6-Way electronic shift module wir-
ing connector (4).
12. Disconnect the autostick wiring connector (1).
13. Remove the wiring tie strap (2) securing the auto-
stick wiring to the column.
14. Unsnap the gear shift lever boot (2) from the clus-
ter bezel (3). Slide the boot up the gear shift lever
(1), away from the bezel.
15. Remove the gear shift lever mounting screw (1).
16. Slide the gear shift lever (2) out of the column
shift mechanism.
17. Remove the cluster bezel. (Refer to 23 - BODY/
INSTRUMENT
PANEL/CLUSTER
BEZEL
-
REMOVAL)
LX
COLUMN SERVICE INFORMATION
19 - 123
18. Unsnap and move the adjustment handle locking
tab (3) forward as shown unlatching the handle
(2) from the column.
19. Remove the three roll top shroud mounting
screws and remove the roll top shroud (1) along
with the manual tilt/telescope handle (3).
20. Remove the two retaining nuts (1) at the bulkhead
(2) for the steering column.
21. Remove the instrument cluster assembly. (Refer
to 8 - ELECTRICAL/INSTRUMENT CLUSTER -
REMOVAL)
19 - 124
COLUMN SERVICE INFORMATION
LX
22. Depress the tabs on the rear of the column wiring
harness connector and remove the connector
from the steering column.
23. Disconnect the shift cable (2) at the shift mecha-
nism (1).
24. Remove the shift cable (2) from the mounting
bracket (3).
25. Raise and support the vehicle. (Refer to LUBRI-
CATION & MAINTENANCE/HOISTING - STAN-
DARD PROCEDURE)
26. Remove the pinch bolt (4) at the lower coupling
shaft (5).
27. Slide the steering shaft (3) out of the lower cou-
pling shaft (5).
28. Lower vehicle.
LX
COLUMN SERVICE INFORMATION
19 - 125
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст