Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1854
FLUID COOLER
DESCRIPTION
This vehicle uses a fluid-to-air type power steering
fluid cooler (2) with external cooling fins. The cooler
mounts to clips attached to the front of the cooling
module.
Unlike the standard power steering fluid cooler which
makes one pass across the cooling module, the SRT8
(and Police Package) cooler (2) makes three passes
across the front of the cooling module.
19 - 234
PUMP
LX
REMOVAL
FLUID COOLER
1. Disconnect and isolate battery negative cable (2)
from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. (Refer to LUBRICATION
& MAINTENANCE/HOISTING - STANDARD PRO-
CEDURE)
4. Remove belly pan. (Refer to 23 - BODY/EXTERI-
OR/BELLY PAN - REMOVAL)
5. Remove hose clamp, then return hose (1) from
steering gear at cooler (2).
6. Remove hose clamp, then return hose (3) to reser-
voir at cooler (2).
LX
PUMP
19 - 235
7. Push in on cooler mounting clip tabs.
8. Remove cooler from clips mounted to cooling
module.
FLUID COOLER - SRT8/POLICE PACKAGE
1. Disconnect and isolate battery negative cable (2)
from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. (Refer to LUBRICATION
& MAINTENANCE/HOISTING - STANDARD PRO-
CEDURE)
4. Remove belly pan. (Refer to 23 - BODY/EXTERI-
OR/BELLY PAN - REMOVAL)
19 - 236
PUMP
LX
5. Remove hose clamp (1), then return hose (5) from
steering gear at cooler (2).
6. Remove hose clamp (4), then return hose (3) to
reservoir at cooler (2).
7. Push in on cooler mounting clip tabs.
8. Remove cooler from clips mounted to cooling
module.
LX
PUMP
19 - 237
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст