Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 70

7. Torque center bearing-to-body bolts to 27 N·m (20

ft. lbs.).

8. Install heat shield (1).

9. Install rear exhaust system (2)

3 - 12

SHAFT-PROPELLER

LX

10. Install crossmember (1).

SPECIFICATIONS – PROPELLER SHAFT

TORQUE SPECIFICATIONS

DESCRIPTION

N·m

Ft. Lbs.

In. Lbs.

BOLT/NUT - SHAFT

COUPLER-TO-

TRANSMISSION

58

43

—

BOLT/NUT - SHAFT

COUPLER-TO-REAR

AXLE ASSEMBLY

58

43

—

BOLT/NUT - COUPLER/

DAMPER-TO-

PROPELLER SHAFT

(REAR)

58

43

—

BOLT - CENTER

BEARING-TO-BODY

(REAR)

27

20

—

BOLT - FRONT

PROPELLER SHAFT TO
AXLE/TRANSFER CASE

FLANGE

61

45

—

LX

SHAFT-PROPELLER

3 - 13

SPECIAL TOOLS – PROPELLER SHAFT

Bearing Splitter, 1130

Installer C-4735-1

3 - 14

SHAFT-PROPELLER

LX

BEARING-CENTER

REMOVAL

1. Remove propeller shaft from vehicle.

NOTE: To address propeller shaft imbalance con-
cerns, the propeller shaft spline interface has a
“skip-tooth” design allowing only one possible
assembly orientation. Install reference marks only
to aid in assembly.

2. Mark front and rear shaft segments (2,3) with

installation reference marks (1).

3. Separate propeller shaft front and rear segments at

bearing and remove boot (1)

LX

SHAFT-PROPELLER

3 - 15