Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 104
12. Back off W-129-B spreader (1) to relax tension on
housing.
13. Measure snap ring thickness and record for future
use.
14. Install Tool 9522 (1) into one side of housing and
push inward to release differential side bearing
cup (2) from opposite side. Repeat for other
bearing.
3 - 148
REAR AXLE - 198RII
LX
15. Remove differential assembly from axle housing.
NOTE: Note: If difficulty removing differential is
encountered due to interference with W-129-B
spreader and adapter plates, remove spreader and
adapter plates to facilitate removal.
DISASSEMBLY
1. Remove differential ring gear-to-case bolts (1).
2. Using brass drift (1), remove ring gear (2).
LX
REAR AXLE - 198RII
3 - 149
3. Remove bearings (2) from the differential case (3)
with Puller/Press C-293-PA (5), Adapters C-293-37
(1) and Plug SP-3289 (4).
4. Drive out pinion shaft-to-case roll pin using ham-
mer and suitable punch.
3 - 150
REAR AXLE - 198RII
LX
5. Using brass drift (2), drive out pinion shaft (1).
6. Install Tool 9631 (1) into differential side gear.
7. Rotate Tool 9631 (1) to gain access to and remove
pinion gears and thrust washers.
LX
REAR AXLE - 198RII
3 - 151
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст