Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 819
INSTALLATION
1. Inspect grommet and if installing new motor, use a
new grommet. Position the motor into opening and
firmly press into place.
2. Install the washer reservoir (Refer to 8 - ELECTRI-
CAL/WIPERS/WASHERS/WASHER RESERVOIR -
INSTALLATION).
3. Refill the reservoir with fluid drained previously.
4. Connect the battery negative cable.
8R - 96
WIPERS/WASHERS - SERVICE INFORMATION
LX
WASHER RESERVOIR
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front fascia (4) (Refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL).
3. Disconnect electrical harness connectors (1 and 3)
from reservoir.
4. Disconnect hose from reservoir (2) and drain fluid
into container.
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 97
5. Remove the rear mounting fastener (2).
6. Remove the remaining fasteners (1).
8R - 98
WIPERS/WASHERS - SERVICE INFORMATION
LX
7. Remove the reservoir (4) from the vehicle.
INSTALLATION
1. Position reservoir (4) in vehicle.
LX
WIPERS/WASHERS - SERVICE INFORMATION
8R - 99
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст