Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 132
SPECIAL TOOLS–215 MM RII AXLE
Installer, 9754
Installer, 9755
3 - 260
REAR AXLE - 215RII
LX
SEAL - PINION FLANGE
REMOVAL
1. Remove rear axle assembly from vehicle. Refer to
Rear Axle Removal.
2. Measure axle assembly rotating torque and record
measurement for reuse on assembly.
3. Using flange holder C-3281(1) and 41mm socket,
remove pinion flange nut and discard.
LX
REAR AXLE - 215RII
3 - 261
NOTE: Due to axle imbalance concerns, it is nec-
essary to make sure pinion flange-to-shaft orienta-
tion is maintained. If alignment marks are not
visible, apply appropriate marks before removing
pinion flange.
4. Using puller 1026 (1), remove pinion flange (2)
from pinion shaft.
5. Using suitable tool (1), remove pinion seal (2) and
discard.
3 - 262
REAR AXLE - 215RII
LX
INSTALLATION
1. Apply light coating of gear lubricant to the lip of the
pinion seal.
2. Using Tool 9754 (1), install pinion seal until tool
bottoms on carrier.
3. Install pinion flange into position. Align index marks
to maintain assembly balance.
4. Using Installer 6448A (1), lightly tap on pinion
flange (2) until adequate pinion shaft threads are
exposed.
LX
REAR AXLE - 215RII
3 - 263
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст