Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 127
3. Press pinion tail bearing cup into housing using
Tools C-4171 (1) and D-146 (2).
4. Press new pinion head bearing (2) onto pinion
shaft using Tool C-3095-A (1).
3 - 240
REAR AXLE - 210RII
LX
5. Install washers (2) and new collapsible spacer (1)
to pinion shaft.
6. Install pinion shaft (1) into housing and support on
press table atop Tool 8255 (2). Ensure pinion
gear face is centered atop Tool 8255.
LX
REAR AXLE - 210RII
3 - 241
7. Using Tool C-3095-A (1), press on new pinion tail
bearing (2).
8. Install new pinion seal (1) into position.
3 - 242
REAR AXLE - 210RII
LX
9. Press pinion seal into housing using Tool 9231A
(1).
10. Lightly lubricate pinion flange seal with axle lubri-
cant for flange installation.
11. Align index marks and press pinion flange (2) on
using Tool C-3095-A (1).
12. Install new pinion flange nut by hand.
13. Hold pinion flange with Tool C-3281 (1). Using a
deep 41 mm socket, tighten pinion flange nut to
an initial torque of 203 N·m (150 ft. lbs.).
LX
REAR AXLE - 210RII
3 - 243
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст