Chrysler Crossfire. Manual — part 972

14. Connect the cover support cables (1) to the front

bow (2) (left side shown, right side similar).

15. Install the top to the front bow.

16. Lower the top assembly into the cargo compart-

ment.

17. Install the right and left front bow side cover

retainer screws (1) (two on each side). Tighten
the screws to 2.5 N·m (22 in. lbs.).

ZH

CONVERTIBLE TOP

23 - 559

18. Install the left and right front side weather strips

(1) (right side shown, left side similar).

19. Install the front cover retainer (4) and retaining

screws (1). Tighten screw to 5 N·m (44 in. lbs.).

20. Lower tonneau cover down and manually lock

cover into place. (Refer to 23 - BODY/CONVERT-
IBLE TOP - STANDARD PROCEDURE).

21. Connect the negative battery cable.

23 - 560

CONVERTIBLE TOP

ZH

WEATHERSTRIP/SEALS

TABLE OF CONTENTS

page

page

HEADER / A-PILLAR WEATHERSTRIP

REMOVAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 561

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . 562

CONVERTIBLE RAIL WEATHERSTRIP

REMOVAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 562

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . 563

TRUNK OPENING WEATHERSTRIP

REMOVAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 564

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . 565

REAR BOW WEATHERSTRIPS

REMOVAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 565

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . 566

TONNEAU COVER WEATHERSTRIP

REMOVAL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 566

INSTALLATION

. . . . . . . . . . . . . . . . . . . . . . . . 567

HEADER / A-PILLAR WEATHERSTRIP

REMOVAL

1. Using a trim stick or other suitable device, carefully

pry up the inner edge.

2. Grasp the edge of the weatherstrip and pull out-

ward to remove the seal from the a-pillar and
header.

ZH

WEATHERSTRIP/SEALS

23 - 561

INSTALLATION

1. Position the weatherstrip on the header and pillar.

2. Firmly press downward to seat the weatherstrip in

the flange.

CONVERTIBLE RAIL WEATHERSTRIP

REMOVAL

1. Open the convertible top half way.

2. Remove the convertible top side rail weatherstrip

(1).

23 - 562

WEATHERSTRIP/SEALS

ZH