Chrysler Crossfire. Manual — part 913

3. Remove the protective covering from the three

adhesive strips (1, 2, 3).

4. Insert the louver assembly into the front fender

holes.

5. Rotate the louver toward the fender and insert the

retaining clips into the clip holes in the fender.

6. Press the retaining clips into the clip holes in the

fender.

7. Apply pressure to the tips of the louver assembly

and adhere the louver to the fender.

ZH

EXTERIOR

23 - 323

8. Remove the protective covering from the forward

adhesive strip (1).

9. Apply pressure to the front of the louver assembly

and adhere the louver to the fender.

23 - 324

EXTERIOR

ZH

4. Remove the gas prop lock (1) on the lower end (2).

5. Remove gas prop from vehicle.

INSTALLATION

1. Place gas prop (2) in position on the vehicle.

2. Install the lower lock cap (1) on the gas prop (2).

23 - 326

HOOD

ZH

Была ли эта страница вам полезна?
Да!Нет
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности