SsangYong Korando II (1996-2006 year). Manual — part 200
OM600 ENGINE CONTROLS 1F3 -- 41
DAEWOO MY_2000
After Testing
Preceding Work : Start of delivery test
Position Sensor (RIV method)
1 Adjusting Screw
2 Bolt
23N∙m (17 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
3 Fuel Injection Pump
4 Bolt
23N∙m (17 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
5 Scale
Rl start of delivery = 14_-- 16_ ATDC
. .
1F3 -- 42 OM600 ENGINE CONTROLS
DAEWOO MY_2000
Tools Required
617 589 08 21 00 Position Sensor
Adjustment Procedure
1. Position the No. 1 cylinder at ATDC 15_
Notice
Do not rotate the engine in opposite direction of en-
gine rotation.
2. Remove the bolt (2) at the supporting bracket.
3. Remove the bolt (4).
4. Turn the adjusting screw (1) until both lamps ’A’ + ’B’
on the position sensor light up.
To the right
Start of delivery retarded
To the left
Start of delivery advanced
Notice
If the adjustment range is not adequate, remove the
injection pump and reinstall.
Position Sensor 617 589 08 21 00
5. After adjusting, retighten all the bolt to the specified
torque.
OM600 ENGINE CONTROLS 1F3 -- 43
DAEWOO MY_2000
Digital tester (RIV Method)
1 Bolt
23N∙m (17 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
2 Adjusting
Screw To the right : start of delivery retarded
To the left : start of delivery advanced
3 Bolt
23N∙m (17 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
Service Data
Start of Delivery (RIV)
ATDC 14_ -- 16_
Ldling Speed
OM661LA : 720 -- 820 rpm, OM662LA : 750 -- 850 rpm
Tools Required
617 589 09 21 00 Rl Sensor
617 589 10 21 00 Timing Tester
667 589 00 21 00 TDC Pulse Generator
Commercial Tools
Item
Tools
Digital Tester
With Pulse Generator
Bosch, MOT 001.03
g
Hartmann & Braun, EOMT3
Without Pulse Generator
Bosch, ETD 019.00
Sun, DIT 9000
ALV, Diesel -- Tester 875
1F3 -- 44 OM600 ENGINE CONTROLS
DAEWOO MY_2000
Adjustment Procedure
1. Remove the bolt (3) at the supporting bracket.
2. Remove the bolts (1) at the timing case cover.
3. Run the engine at idle speed.
4. Turn the adjusting screw (2) until the specification
(15_ ± 1_ ATDC) is indicated on the digital tester.
To the Right
Start of Delivery Retarded
To the Left
Start of Delivery Advanced
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст