SsangYong Korando II (1996-2006 year). Manual — part 198
OM600 ENGINE CONTROLS 1F3 -- 33
DAEWOO MY_2000
12. Push back the timing chain with retaining plate (26)
and remove the injection timing device (9).
Retaining Plate 667 589 04 63 00
13. Installation should follow the removal procedure in
the reverse order.
14. After assembling the engine, check start of delivery
and adjust if necessary.
1F3 -- 34 OM600 ENGINE CONTROLS
DAEWOO MY_2000
INJECTION TIMING DEVICE
Preceding Work : Removal of injection timing device
1 Cam Sprocket
Check
. . . . . . . . . . . . . . . . . . . . .
2 Bushing
Check
. . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Governor Weights
4 Segment Flange and Drive Hub
5 Compression Springs
OM600 ENGINE CONTROLS 1F3 -- 35
DAEWOO MY_2000
Disassembly & Assembly
1. Remove the governor weights (3).
2. Pull out the compression springs (5) and cam
sprocket (1) from the segment flange (4).
3. Knock out the bushing with a proper drift.
4. Installation should follow the removal procedure in
the reverse order.
1F3 -- 36 OM600 ENGINE CONTROLS
DAEWOO MY_2000
START OF DELIVERY TEST (POSITION SENSOR, RIV METHOD)
1 Position Sensor
2 Battery
3 Fuel Injection Pump
4 Seal
Replace
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Screw Plug
30N∙m (22 lb-ft)
. . . . . . . . . . . . . . . .
Service Data
Start of Delivery (RIV)
ATDC 14_ -- 16_
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст