SsangYong Korando II (1996-2006 year). Manual — part 202
OM600 ENGINE CONTROLS 1F3 -- 49
DAEWOO MY_2000
5. Coat the new seal (23) with engine oil and install it.
6. Insert the fuel injection pump (25) and tighten the
bolts (22).
Tightening Torque
23 N∙m (17 lb-ft)
7. Remove the locking screw (32).
8. Tighten the bolt(12).
Tightening Torque
23 N∙m (17 lb-ft)
9. Insert the washer (21) and tighten the bolts (20) and
then remove the assembly cage (29).
Tightening Torque
46 N∙m (34 lb-ft)
10. Connect the fuel pipes.
Return Line
46 N∙m (34 lb-ft)
Fuel Injection Line
18 N∙m (13 lb-ft)
Fuel feed Line
13 N∙m (10 lb-ft)
Suction and Pressure Line
13 N∙m (10 lb-ft)
Notice
Replace the seal.
Box Wrench Insert 000 589 77 03 00
1F3 -- 50 OM600 ENGINE CONTROLS
DAEWOO MY_2000
11. Assemble the plastic clip (8).
12. Connect the vacuum line (13, 14).
13. Connect the connecting rod (9).
14. Connect the accelerator control damper (10).
(Manual transmission vehicle)
15. Install the chain tensioner.
16. Install the vacuum pump.
17. Check the start of delivery.
18. Adjust the idle speed.
OM600 ENGINE CONTROLS 1F3 -- 5
DAEWOO MY_2000
VACUUM CONTROL SYSTEM TEST
1 Ventilation (To Passenger Compartment)
2 Engine Cut--Off Valve (Ignition Key Switch)
3 Auto--locking Hub Solenoid Valve
4 Engine Stop Valve Unit
5 PLA Vacuum Unit (Idle Speed Adjustment)
6 Engine
7 Vacuum Pump
8 30_ Thermovalve
9 Fuel Injection Pump
Test Data
Idle Speed Increase
At least 100 rpm at approx. 500mbr
Permissible Pressure Drop of System
400 -- 500mbar approx. 1 min.
1F3 -- 6 OM600 ENGINE CONTROLS
DAEWOO MY_2000
Tools Required
001 589 73 21 00 Vacuum Pump
201 589 13 21 00 Vacuum Tester
667 589 00 21 00 TDC pulse generator
Commercial Tools
Digital tester
e.g. Bosch MOT 001.03
Sun DIT 9000
Temperature measuring instrument with test probe
WB24
e.g. Ahlborn, Therm 2263--2
Eichenfeldstrabe 1 -- 3
D--8150 Holzkirchen
Tester Connection
11 TDC Pulse Sender Unit
12 Digital Tester
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст