SsangYong Korando II (1996-2006 year). Manual — part 13
1B1 -- 18 M162 ENGINE MECHANICAL
DAEWOO MY_2000
POLY V -- BELT
Preceding Work: Removal of cooling fan
1 Poly V--belt
2 Belt Tensioning Pulley
Removal & Installation Procedure
1. Release the belt tension by turning the belt tensioning
pulley nut clockwise.
2. Remove the poly v--belt.
Notice: Check the belt for damage and tensioning
pulley bearing point for wear and replace them if neces-
sary.
3. Install the belt by turning the nut of tensioning pulley
clockwise.
M162 ENGINE MECHANICAL 1B1 -- 19
DAEWOO MY_2000
Poly V- Belt Arrangement
1 Belt Tensioning Pulley
2 Crankshaft Belt Pulley
3 A/C Compressor Pulley
4 Cooling Fan Pulley
5 Generator Pulley
6 Idler
7 Power Steering Pump Pulley
8 Cooling Fan and Water Pump Pulley
1B1 -- 20 M162 ENGINE MECHANICAL
DAEWOO MY_2000
TENSIONING DEVICE
Preceding Work: Removal of poly v--belt
1 Belt (L = 2245)
2 Bolt Combi (M8 x 14, 3 pieces) + Washer
22.5--27.5 NSm (16.6--20.3 lb-ft)
. . . . . . . . . . . . .
3 Water Pump Pulley
4 Nut
5 Tensioning Pulley
M162 ENGINE MECHANICAL 1B1 -- 21
DAEWOO MY_2000
Removal & Installation Procedure
1. Remove the poly v--belt.
2. Remove the tensioning pulley by turning its mounting
nut counter clockwise as shown in figure.
Installation Notice
Tightening Torque
40.5 -- 49.5 NSm
(29.9 -- 36.5 lb-ft)
3. Remove the 3 bolts (2) and remove the water pump
pulley (arrow).
Installation Notice
Tightening Torque
22.5 -- 27.5 NSm
(16.6 -- 20.3 lb-ft)
4. Remove the mounting bolts (M8 x 30, 3 pieces) at the
tensioning device, and remove the tensioning device
(arrow).
Installation Notice
Tightening Torque
26 -- 32 NSm (19 -- 24 lb-ft)
5. Installation should follow the removal procedure in
the reverse order.
POLY V -- BELT INSPECTION
D
Make marks on the belt with chalk.
D
Rotate the engine and check the belt for damage.
Notice: If one of the following types of damages is
found, replace the belt.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст