SsangYong Korando II (1996-2006 year). Manual — part 152
OM600 ENGINE MECHANICAL 1B3 -- 57
DAEWOO MY_2000
21. Position the camshaft on marking and install the
camshaft sprocket.
Notice
Align the alignment marks on the chain and sprock-
et.
22. Check the TDC position of the crankshaft.
23. Install the camshaft sprocket bolt.
Tightening Torque
25 N∙m (18 lb-ft) + 90_
1B3 -- 58 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
Notice
Measure the max. length ’L’ and replace the bolt if it
exceeds 53.6mm.
24. Install the exhaust manifold and gasket.
25. Install the turbocharger.
26. Install the exhaust pipe onto the turbocharger.
Tightening Torque
25 N∙m (18 lb-ft)
OM600 ENGINE MECHANICAL 1B3 -- 59
DAEWOO MY_2000
27. Replace the seal and then install the chain tension-
er.
Tightening Torque
80 N∙m (59 lb-ft)
28. Remove the engine lock.
29. Insert the nozzle washer into the hole to face round
part downward.
30. Install the fuel injection nozzle.
Tightening Torque
40 N∙m (30 lb-ft)
31. Connect the fuel hose.
32. Install the cable channel and connect the cables to
glow plugs.
1B3 -- 60 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
33. Replace the gasket and install the cylinder head
cover.
Tightening Torque
10 N∙m (89 lb-in)
34. Install the blow--by hose.
35. Connect the wires to the coolant temperature sen-
sor and the glow plug sensor.
36. Replace the intake manifold gasket.
37. Install the intake manifold.
Tightening Torque
25 N∙m (18 lb-ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст