SsangYong Korando II (1996-2006 year). Manual — part 143
OM600 ENGINE MECHANICAL 1B3 -- 21
DAEWOO MY_2000
POLY V--BELT
1 Nut
23N∙m (17 lb-ft)
. . . . . . . . . . . . . . . . . . . . . . .
2 Tensioning Lever
3 Bolt
4 Spring
5 Tensioning Lever
6 Poly V--Belt
1B3 -- 22 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
Removal & Installation Procedure
1. Remove the nut.
2. Push the tensioning lever in direction of arrow with a
rod (F12’ 180mm) and pull out the bolt to the rear.
3. Push back the tensioning lever (arrow direction) to
release the spring tension and remove the belt.
4. Install the poly V--belt beginning at the tensioning
pulley (7).
7 Tensioning Pulley
8 Crankshaft
9 Generator
10 Water Pump
11 Guide Pulley
12 Power Steering Pump
13 Aircon. Compressor
Length of Belt
Length (L)
With Air Conditioner
2,100 mm
Length (L)
Without Air Conditioner
2,040 mm
OM600 ENGINE MECHANICAL 1B3 -- 23
DAEWOO MY_2000
TENSIONING DEVICE
Preceding Work : Removal of cooling fan
1 Bolt
21N∙m (15 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
2 Damper
3 Nut
21N∙m (15 lb-ft)
. . . . . . . . . . . . . . . . . . . . . . .
4 Tensioning Lever
5 Guide Rail Pin
6 Bolt
7 Poly V--Belt
8 Belt Pulley
9 Bolt
10N∙m (89 lb-in)
. . . . . . . . . . . . . . . . . . . . .
10 Tensioning Pulley
11 Socket Bolt
29N∙m (21 lb-ft)
. . . . . . . . . . . . . . . .
12 Closing Cover
13 Washer
14 Tensioning Lever
15 Fit Bolt
100N∙m (74 lb-ft)
. . . . . . . . . . . . . . . . . . .
16 Closing Cover
17 Spring
18 Bolt
20N∙m (15 lb-ft)
. . . . . . . . . . . . . . . . . . . . . .
1B3 -- 24 OM600 ENGINE MECHANICAL
DAEWOO MY_2000
Removal & Installation Procedure
1. Remove the nut.
Installation Notice
Tightening Torque
10 N∙m (89 lb-in)
2. Push the tensioning lever in direction of arrow with a
rod (F12’ 180mm) and push out the bolt to the rear.
3. Push back the tensioning lever to release the spring
tension and remove the belt.
4. Remove the bolt (9) and then remove the belt pulley
(8).
5. Remove the bolt (1, 18) and take off the damper (2).
Notice
Pay attention to installation position of the damper.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст