SsangYong Korando II (1996-2006 year). Manual — part 28
1B1 -- 84 M162 ENGINE MECHANICAL
DAEWOO MY_2000
Inspection
1. Measure the basic bore of the connecting rod bear-
ing.
Notice: If the basic bore exceeds the value of
51.614mm, replace the bearing or check the connecting
rod.
2. Check connecting rod bolts.
Length When New (L)
51.7 -- 52 mm
Max. Length (L)
52.9 mm
Tightening Torque
1st step: 40 NSm
(30 lb-ft)
Tightening Torque
2nd step: 90°
Notice: If the length exceeds max. length, replace it.
3. Check the assembly mark(indication//or number:ar-
row) of the connecting rods and the bearing cap when
installing.
Notice
D
Make sure it doesn’t exceed over 4g with other con-
necting rods when replacing the connecting rods.
D
Check if the connecting rod and the bearing cap are
accurately seated on the groove when replacing the
bearing.
M162 ENGINE MECHANICAL 1B1 -- 85
DAEWOO MY_2000
PISTON RING
Preceding Work: Removal of piston
1 Piston Compression Ring
2 Piston Compression Ring
3 Piston Oil Ring
4 --
5 Coil Spring and Control Ring
6 Hook Spring
1B1 -- 86 M162 ENGINE MECHANICAL
DAEWOO MY_2000
Replacement Procedure
1. Measure the piston ring’s gap.
E d G
f Th
Groove 1 0.20 -- 0.40 mm
End Gap of The
Piston Ring
Groove 2 0.20 -- 0.40 mm
Piston Ring
Groove 3 0.20 -- 0.45 mm
Gap Between
Groove 1 0.015 -- 0.050 mm
Gap Between
The Piston and
Th Pi t
Ri
Groove 2 0.020 -- 0.040 mm
The Piston Ring
Groove 3 0.010 -- 0.045 mm
Notice: If out of specification, replace the piston ring.
2. Remove the piston ring with a pliers.
3. For installation, position the piston ring to be the
‘TOP’ mark on the piston ring upward and arrange the
piston ring ends to be 120° apart.
4. Adjust the hook spring joint in the oil ring 180° away
from the ring end.
M162 ENGINE MECHANICAL 1B1 -- 87
DAEWOO MY_2000
ENGINE OIL SPECIFICATION
1 Drain Plug
25 NSm (18 lb-ft)
. . . . . . . . . . . . . . . . .
2 Oil Filter
3 Engine Oil Filler Cap
4 Dipstick Gauge
Specifications
Application
Descrition
Capacity
Min : 6.7L, Max : 8.2L
Quality
D
API SH or above grade
y
D
ACEA : A2 or A3
D
Approved oil by MB Sheet 229.1
Viscosity
D
Approved oil by MB Sheet 224.1
Replacement
D
Initial at 1000--1500km, Replace every 15000km
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст