SsangYong Korando II (1996-2006 year). Manual — part 26
M162 ENGINE MECHANICAL 1B1 -- 75
DAEWOO MY_2000
TENSIONING RAIL
Preceding Work: Removal of timing gear case cover
1 Tensioning Rail
2 Plastic Guide
3 Tensioning Rail Pin
4 Guide Rail
Removal & Installation Procedure
1. Put the assembly mark at the camshaft sprocket and
the timing chain with the paint (arrow).
2. Remove the exhaust camshaft sprocket.
3. Remove the tensioning rail (1) from the tensioning rail
pin (3).
Notice:
D
Replace the plastic guide (2) if it is damaged.
D
For installation, exactly align the plastic guide (2) with
the tensioning rail (1).
4. Installation should follow the removal procedure in
the reverse order.
5. Check the camshaft timing position.
1B1 -- 76 M162 ENGINE MECHANICAL
DAEWOO MY_2000
CYLINDER HEAD GUIDE RAIL
Preceding Work: Removal of cylinder head front cover
1 Chain Tensioner
2 Upper Guide Rail
3 Upper Guide Rail Pin
4 Wrench
Removal & Installation Procedure
1. Remove the chain tensioner (1).
2. Turn the exhaust camshaft to the camshaft rotating
direction using the wrench (4) and loosen the timing
chain at upper guide rail (2).
3. Pull out the upper guide rail pin from the guide rail (2).
4. Turn the exhaust camshaft to the opposite direction
of rotation using the wrench.
5. Check for damages at the upper sliding rail and re-
place it if necessary. Install the upper guide rail pin.
6. Install the chain tensioner.
Installation Notice
Tightening
Screw Plug
40 NSm
(30 lb-ft)
Tightening
Torque
Tensioner
Assembly
72 -- 88 NSm
(53 -- 65 lb-ft)
M162 ENGINE MECHANICAL 1B1 -- 77
DAEWOO MY_2000
CRANKCASE GUIDE RAIL
Preceding Work: Removal of timing gear case cover
1 Guide Rail
2 Plastic Guide
3 Guide Rail Pin
4 Tensioning Rail
Removal & Installation Procedure
1. Put the assembly mark at the camshaft sprocket and
the timing chain with the paint (arrow).
2. Remove the exhaust camshaft sprocket.
3. Remove the guide rail (1) from the guide rail pin (3).
Notice:
D
Replace the plastic guide (2) if damaged.
D
Connect the plastic guide (2) and the guide rail (1) by
aligning them accurately when installing.
4. Installation should follow the removal procedure in
the reverse order.
5. Check the camshaft timing position.
1B1 -- 78 M162 ENGINE MECHANICAL
DAEWOO MY_2000
CRANKSHAFT SPROCKET
Preceding Work: Removal of oil pan
Removal of tensioning rail
Removal of crank case guide rail
1 Oil Pump Chain Tensioner
2 Oil Pump Chain Bushing
3 Oil Pump Chain Spring
4 Crankshaft Sprocket
5 Key
6 Bolt (M8 x 20, 1 piece) / Washer
29--35 NSm (21--26 lb-ft)
. . . . . . . . . . . . . . . . . . . .
7 Oil Pump Sprocket
8 Oil Pump
9 Oil Pump Roller Chain
10 Timing Chain
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст