SsangYong Musso. Manual — part 306
1E1-6 M162 ENGINE ELECTRICAL
BATTERY
1 Cable Terminal (-)
2 Cable Terminal Cap (-)
3 Cable Terminal Cap (+)
4 Nut
5 Fuseblink Box
6 Terminal (+)
7 Battery holddown Bracket
8 Battery Clamp Bolt
9 Battery
10 Sub Tray
11 Battery Tray
Removal & Installation Procedure
Notice
!
Disconnect the battery negative cable first.
!
Insert the clamp bolt (8) into the battery tray hole (11)
from inside when installing.
M162 ENGINE ELECTRICAL 1E1-7
1 Ignition Coil Cable Cover
2 Bolt (M6 X 60, 7 pieces) . . . . . . . 9-11 Nm
3 Spark Plug
SPARK PLUG
Preceding Work : Removal of intake air duct
T1/1 Ignition Coil : Cylinder 2 and 5
T1/2 Ignition Coil : Cylinder 3 and 4
T1/3 Ignition Coil : Cylinder 1 and 6
1E1-8 M162 ENGINE ELECTRICAL
Tools Required
120 589 09 00 Spark Plug Wrench
Replacement Procedure
1. Remove the seven bolts (2) and remove the ignition cable
cover.
Installation Notice
Tightening Torque
9 - 11 Nm
Tightening Torque
9 - 11 Nm
Tightening Torque
9 - 11 Nm
2. Remove the two bolts (M6 X 25) from each ignition cable
and remove the ignition cable.
Installation Notice
3. Remove the spark plug using the special tool.
Installation Notice
Spark Plug Wrench 120 589 02 09 00
M162 ENGINE ELECTRICAL 1E1-9
IGNITION CABLE
Preceding Work : Removal of intake air duct
1 Control Cable Connection
2 Ignition Cable
3 Spark Plug Connector
4 Coupling Plug
5a, 5b
Secondary Voltage Connection
E
Iron Core
L1
Secondary Ignition Coil
L2
Primary Ignition Coil
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст