SsangYong Musso. Manual — part 405
1B3-182 OM600 ENGINE MECHANICAL
Service Data
Height ‘Y’
Permissible unevenness of contacting surface
Permissible roughness upper contacting surface
Permissible variation of parallelism of crankcase upper
surface to lower surface in longitudinal direction
Piston protrusion at TDC to crankcase upper surface
In longitudinal direction (B)
In transverse direction (C)
Min. 299.62 mm
0.06 mm
0.06 mm
0.0006 - 0.0016 mm
0.05 mm
0.965 mm
0.735 mm
Max.
Min.
FACING CRANKCASE CONTACTING SURFACE
1 Crankcase
2 Crankcase Contacting Surface
Y Height (crankcase upper surface - crankcase
lower surface)
B Longitudinal Direction
C Transverse Direction
H Chamfer Height
b Chamfer Angle
OM600 ENGINE MECHANICAL 1B3-183
OIL GALLERY STEEL BALL
Preceding Work : Removal of cooling fan
Removal of the coolant pump housing
Removal of the flywheel and driven plate
1 Steel Ball . . . . . . . . . . . . .
φ
15mm
2 Screw Plug . . . . . . . ... Loctite 241,50Nm
Notice
The screw plug (2) has to be installed as a repair solution if the steel ball (1) is leaking.
1B3-184 OM600 ENGINE MECHANICAL
3 Steel Ball . . . . . . . . . . . . .
φ
17mm
4 Seal
5 Screw Plug . . . . . . . . . . . . . 50Nm
Notice
The seal (4) and screw plug (5) have to be installed as a repair solution if the steel ball (3) is leaking.
Tools Required
601 589 08 15 00 Drift
OM600 ENGINE MECHANICAL 1B3-185
Removal & Installation Procedure
1. Remove the timing case cover.
2. By inserting a round bar (6) approx. 0.7m from the back to
the front side through the oil gallery, knock out the steel
balls (1,3).
Notice
Be careful not to damage the bores of the steel balls.
6 Shop-made tool
3. Thoroughly clean the bores of steel balls.
4. Place the steel ball (3) onto the drift (7) with a little grease
and position to the bore and then tap until the drift stops.
Drift 601 589 08 15 00
5. Place the steel ball (1) onto the drift (7) with a little grease
and position to the bore and then tap until the drift stops.
Drift 601 589 08 1500
6. Warm up the engine and check the oil for leaks.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст