SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 156
DI10-19
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
5. In “MULTI CALIBRATION” screen, select the relevent
model.
4. If you turn the ignition switch to “ON” position and press “
”, the message as shown in figure 1 (system
initialization) appears, and then “MULTI CALIBRATION” screen (figure 2) is displayed.
figure 1
figure 2
6. When you press “
”, the processing message as
shown in figure appears.
DI10-20
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
7. If the multi calibration is completed successfully, “ECU
REPLACE (STEP 5) screen is displayed.
Backup data:
- Multi calibration value
- VIN value
- Variant code value
- Injector (C2I) value
8. In immobilizer equipped vehicle, the immobilizer coding
should be done after completed the multi calibration.
9. Press “
” and enter the user password.
10. If the password is invalid, the “access denied” screen as
shown in figure is displayed.
DI10-21
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
11. If the password is valid, an immobilizer coding is started.
12. If you want to code for additional keys, remove the first
key from key switch and insert the second key. Turn it
to “ON” position and press “
” to proceed.
13. You can code up to five keys with same manner.
14. When the immobilizer coding is completed, press “
”.
The completion message as shown in figure appears.
DI10-22
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
15. When you turn the ignition key to “OFF” position, the
message screen as shown in figure is displayed. Wait
for 15 seconds and turn the ignition key to “ON” position.
16. Press “
” to return to “MAIN MENU” screen.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст