SsangYong Rexton. Manual — part 488
REAR AXLE 3D-5
SSANGYONG Y200
CROSS SECTIONAL VIEW
YAD3D020
1 Rear Axle Shaft Assembly
2 Bracket Assembly
3 Hub Oil Seal
4 Bolt
5 Axle Shaft Tube
6 Coil Spring Seat (Lower)
7 Caliper Assembly
8 Input Shaft/Flange
9 Rod Mounting Bracket
10 Wheel Speed Sensor
SSANGYONG Y200
3D-6 REAR AXLE
REAR AXLE SHAFT ASSEMBLY
With disc brake
YAD3D030
1 Brake Disc
2 Plug
3 Rear Axle Shaft
4 Nut
5 Washer
6 Parking Brake Cable
7 Parking Brake Lining & Back Plate Assembly
8 Brake Caliper Assembly
9 Spring Washer
10 Bolt
11 Rear Axle Housing
REAR AXLE 3D-7
SSANGYONG Y200
With drum brake
YAD3D150
1 Brake Drum
2 Plug
3 Rear Axle Shaft
4 Wheel Bolt
5 Nut
6 Washer
7 Retainer Plate
8 Oil Seal
9 Bearing
10 Snap Ring
11 Snap Ring
12 Oil Seal
13 Brake Shoe & Back Plate Assembly
14 Bolt
15 Rear Axle Housing
SSANGYONG Y200
3D-8 REAR AXLE
ON-VEHICLE SERVICE
AXLE SHAFT ASSEMBLY
(WITH DISC BRAKE)
Removal
1. Remove the tire.
YAD3D040
YAD3D060
YAD3D050
2. Release the parking brake.
3. Remove the fixing pin of parking brake.
4. After detaching the parking brake lever, detach
the cable.
5. Remove the two fixing bolt of brake caliper.
Notice: Be careful not to damage the brake oil
hose.
6. Remove the brake caliper assembly.
Notice: If replacing the brake pad only, remove the
upper fixing bolt of caliper pad and lower it.
MAINTENANCE AND REPAIR
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст