Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1005
10-20 CAB
Important Operations
1. Window Regulator Handle
•
To remove the regulator handle, remove the clip at the
root of the handle by using wire.
2. Bezel
•
Remove the screw while pulling the inside lever toward
you.
4. Door Trim Pad
•
Remove the cover bottom of the trim pad (4 pcs), then
remove the screws.
9. Window Regulator
•
Remove the 4 screws holding the regulator.
CAB 10-21
10.Window Glass
•
First, align the height of regulator to the access hole.
Remove 2 screws attaching bottom channel and
regulator, then remove the glass.
•
Remove the window glass by tilting it as necessary.
14.Door Lock Assembly
•
Disconnect the linkage from the door outside handle,
inside lever and lock cylinder.
Remove the 2 bolts holding the outside handle from
inner side.
•
Remove the 3 bolts holding the door lock assembly.
10-22 CAB
ADJUSTMENT (FRONT AND REAR)
Door Hinge
Door alignment can be obtained by moving door hinges.
Prior to adjustment, remove the fender and set the door
temporarily.
Loosen hinge to door bolts when adjusting steps between the
door and body.
Loosen hinge to body bolts to adjust the clearance between the
door and body.
Door Striker
Loosen the striker screws and adjust the position of the striker
by holding a piece of wood against the striker and tapping it
with a hammer.
To obtain correct adjustment, move the position of the striker
vertically so that the lower face of the dovetail becomes parallel
to the striker.
Adjust the number of sheets to control engagement of the
striker with the door latch. One or two sheets are generally
used to obtain correct adjustment.
CAB 10-23
REASSEMBLY
(Front Door)
Reassembly Steps
1. Outside handle
2. Door lock cylinder
3. Glass run front channel
4. Door lock assembly/Door lock actuator
5. Inside lever
6. Glass run rear channel
7. Glass run
8. Window regulator/Power window motor
V
9. Window glass
V
10. Water proof sheet
11. Speaker box
12. Bracket
13. Door mirror bracket
14. Outer waste seal
15. Door mirror assembly
16. Inner waste seal
17. Power window box
18. Door pocket
19. Door trim pad
20. Door mirror cover
21. Door pull case
22. Speaker assembly
23. Speaker grill
24. Bezel
V
25. Power window switch/Windows regulator
handle
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст