Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1720

6F-16 ENGINE EXHAUST

Exhaust Silencer

Exhaust Silencer and Associated Parts

Legend

1. Exhaust Silencer

ENGINE EXHAUST 6F-17

Legend

1. Exhaust Silencer

Removal

(2.2L & 2.0L)

1. Disconnect battery ground cable.

2. Raise the vehicle and support with suitable safety stands.

3. Remove four exhaust silencer fixing bolts and two rear

exhaust pipe fixing bolts and nuts then disconnect rear

exhaust silencer from rear exhaust pipe

4. Remove exhaust silencer mounting rubbers from chassis

side then remove exhaust silencer.

(2.4L)

1. Disconnect battery ground cable.

2. Raise the vehicle and support with suitable safety stands.

3. Remove the damper rubber and nut.

4. Remove exhaust silencer.

6F-18 ENGINE EXHAUST

Installation

(2.2L & 2.0L)

1. Install the exhaust silencer and tighten two bolts and nuts

on rear exhaust pipe to specified torque then tighten four

bolts on Catalytic Converter to specified torque.

(2.4L)

1. Install the exhaust silencer and tighten two bolts and nuts.

Torque:

Bolts: 43 N

⋅⋅⋅⋅m (4.4 kgf⋅⋅⋅⋅m)

ENGINE EXHAUST 6F-19

Rear Exhaust pipe

Rear Exhaust pipe and Associated Parts

Legend

1 Gasket

2 Mounting Rubber

3 Rear Exhaust Pipe

Removal

(2.2L & 2.0L)

1. Disconnect battery ground cable

2. Raise the vehicle and support with suitable safety stands.

3. Remove rear exhaust pipe fixing bolts and nuts, then

disconnect rear exhaust pipe from exhaust silencer.

4. Remove mounting rubber.

5. Remove rear exhaust pipe.