Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 948
REAR AXLE 4B-29
Check the friction disc for wear.
Limit (A - B)
0.1 (0.0039)
Note : A = Non-sliding face thickness
B = Sliding face thickness
Slide gear and sleeve
Check the parts for damage or other abnormal conditions.
Pinion shaft and pinion gear
Check the parts for damage or other abnormal conditions.
<LSD FOR 220 mm>
Pressure Ring
Check the parts for damage or other abnormal conditions.
1
Sliding part for a pinion
2
Sliding part for a disc
3
Sliding part for a gear
4
V-shape groove for the pinion spider
5
Fitting protrusion for a case
6
Fitting part for the inner surface of a case
7
Sliding part for a side gear or a case
4B-30 REAR AXLE
Friction Disc and Plate Assembly
Check the parts for damage or other abnormal conditions.
1
Sliding part
2
Protrusion
Check the friction plate for distortion.
Limit
mm(in)
0.08 (0.0031)
Check the friction plate for wear.
Limit (A - B)
mm(in).
0.1 (0.0039)
Note :
A = Non-sliding face thickness
B = Sliding face thickness
Check the friction disc for distortion.
Limit
mm(in)
0.08 (0.0031)
Check the friction plate for wear.
Limit (A - B)
mm(in).
0.1 (0.0039)
Note :
A = Non-sliding face thickness
B = Sliding face thickness
REAR AXLE 4B-31
Check the Thrust Washer
mm(in)
Limit
1.3 (0.051)
4B-32 REAR AXLE
REASSEMBLY
MINOR COMPONENTS
LIMITED SLIP DIFFERENTIAL (LSD)
<FOR RING SIZE 194 mm>
Reassembly Steps
▲
1. Friction disc and plate
▲
2. Disc spring
3. Spring plate
4. Sleeve
5. Differential cage
6. Friction disc and plate assembly
7. Side gear
8. Friction disc and plate assembly
9. Side gear
▲
10. Pinion gear
▲
11. Pinion washer
12. Thrust block
13. Pinion shaft
14. Spring pin
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст