Isuzu KB P190. Manual — part 250
6C – 36 FUEL SYSTEM
4. Set the nozzle holder to the nozzle tester and check
first nozzle opening pressure, spray condition, seat oil
tightness and each part for oil leaks.
5. When replacing the nozzle, replace the nozzle, lift
piece, pins and spacer as a set with the nozzle service
kit.
CAUTION:
Pre-lift will not be as specified if only the nozzle is
replaced.
040MV030.tif
FUEL SYSTEM 6C – 37
SPECIAL TOOLS
ILLUSTRATION
TOOL NUMBER
TOOL NAME
5-8840-2602-0
(J-39765)
Remover: fuel pump retainer ring
SECTION 6D
ENGINE ELECTRICAL
TABLE OF CONTENTS
PAGE
Main Data and Specifications. . . . . . . . . . . . . . . . . . . . . . . 6D - 2
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . 6D - 3
Torque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 6D - 5
Generator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6D - 7
Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . 6D - 7
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Repair. . . . . . . . . . . . . . . . . . . . . . . . . 6D - 12
Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starter Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6D - 22
Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . 6D - 22
Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Repair. . . . . . . . . . . . . . . . . . . . . . . . . 6D - 26
Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-heating System . . . . . . . . . . . . . . . . . . . . . . . . . . . 6D -33
Inspection and Repair. . . . . . . . . . . . . . . . . . . . . . . . . 6D -33
Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6D -33
System. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGINE ELECTRICAL 6D – 1
6D – 2 ENGINE ELECTRICAL
MAIN DATA AND SPECIFICATIONS
Description
Item
60A 80A
Generator
Type
AC generator with IC regulator and vacuum pump
Hitachi LR160-503E
Hitachi LR180-513B
Voltage
V
Drive and rotation
Ground
polarity
12
V-belt, clockwise viewed from the drive pulley
Negative
Maximum
output
A
60
80
Engine speed ratio
to 1
1.788
Maximum
speed
rpm
11,000
Weight with vacuum pump
kg(lb)
5.8(12.8)
6.4(14.1)
Vacuum Pump
Delivery
volume
cm
3
/rev
Exhaust Characteristic
Maximum vacuum
50
-66.7 kPa (-500 mmHg) bulid up time 21 seconds or less at 1,000
rpm
7 seconds or less at 5,000 rpm
-90.7 kPa (-680 mmHg) or more
Starter Motor
Type
Solenoid controlled
Hitachi
S13-555
12
2.3
8.76
300
Rated
voltage
V
Rated
output
kW
Load
characteristics
Terminal
voltage
V
Load
current
A
Weight kg(Ib)
4.7 (10.4)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст