Isuzu KB P190. Manual — part 1163
7B1-46 MANUAL TRANSMISSION
226RS021
Clutch Hub and Snap Ring Clearance
Standard: 0 - 0.1 mm (0 - 0.004 in)
Snap Ring Availability
Thickness Color
Coding
1.80 mm (0.071 in)
White
1.85 mm (0.073 in)
Yellow
1.90 mm (0.075 in)
Blue
• Use a pair of snap ring pliers to install the snap
ring to the mainshaft.
The snap ring must be fully inserted into the
mainshaft snap ring groove.
16. Install the top block ring.
Apply grease to the needle bearing inner and outer
circumferences and install the needle bearing in the
top gear shaft.
17. Use a bench press to install the top gear shaft ball
bearing to the top gear shaft.
226RS059
The snap ring groove of the ball bearing must be
facing the transmission front side.
18. Use a pair of snap ring pliers to install the top gear
shaft snap ring to the top gear shaft.
MANUAL TRANSMISSION 7B1-47
Main Data and Specifications
General Specifications
MUA 5G
MUA 5H
MUA 5S
Transmission type
Fully synchronized forward and reverse gears
Control method
Remote control with the gear shift lever on the floor.
Gear ratio: Transmission
1st
4.008
4.008
4.357
2nd
2.301 2.301 2.502
3rd
1.427 1.427 1.501
4th
1.000 1.000 1.000
5th
0.828 0.744 0.809
Rev.
3.651 3.651 3.970
Transmission oil capacity
2.95 lit. (3.12 US qt)
Type of lubricant
Engine oil: Refer to the chart in "SECTION 0"
7B1-48 MANUAL TRANSMISSION
Torque Specifications
N
⋅⋅⋅⋅m (kgf⋅⋅⋅⋅m/lb⋅⋅⋅⋅ft)
RTW77BLF003401
About arrow mark, refer to Transmission (MUA) Installation in this section.
MANUAL TRANSMISSION 7B1-49
Torque Specifications (Cont'd)
N
⋅⋅⋅⋅m (kgf⋅⋅⋅⋅m/lb⋅⋅⋅⋅ft)
RTW77BLF003501
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст