Isuzu KB P190. Manual — part 1132
UNIT REPAIR (JR405E) 7A4-51
248L300007
4.2 mm (0.165 in)
4.4 mm (0.173 in)
4.6 mm (0.181 in)
4.8 mm (0.189 in)
37C&L-SUB40
12.Bearing race
13.Rear internal gear
14.Bearing
Install the bearing race and the bearing to the rear internal
gear.
NOTE:
Apply Vaseline to the fitting surfaces of the rear internal
gear to prevent the bearing race and the bearing from
falling during the installation process.
38C&L-SUB43
39C&L-SUB60
• Install the rear internal gear to the low clutch drum.
7A4-52 UNIT REPAIR (JR405E)
40C&L-SUB46
15.Bearing race
16.Rear carrier
17.Bearing
Install the bearing race and the bearing to the rear carrier.
NOTE:
Apply Vaseline to the fitting surfaces of the rear carrier to
prevent the bearing race and the bearing from falling
during the installation process.
41C&L-SUB49
42C&L-SUB61
• Install the rear carrier to the low clutch drum.
43C&L-SUB07
18.Rear sun gear
Install the rear sun gear to the low clutch drum.
44C&L-SUB52
19.Bearing (with bearing race)
20.Front carrier
Install the bearing (with bearing race) to the front carrier.
NOTE:
Apply Vaseline to the fitting surfaces of the front carrier to
prevent the bearing from falling during the installation
process.
UNIT REPAIR (JR405E) 7A4-53
45C&L-SUB04
21.Snap ring
• Install the front carrier to the low clutch drum.
• Install the snap ring to the low clutch drum.
7A4-54 UNIT REPAIR (JR405E)
TRANSMISSION CASE
02CASE-BK06
Legend
1. Transmission case
2. Spring pin (slender)
3. Spring pin (fat)
4. Manual plate
5. Detent spring
6. Parking rod
7. Manual shaft
8. Oil seal
9. Inhibitor switch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст