Isuzu KB P190. Manual — part 1327
8A-370 ELECTRICAL-BODY AND CHASSIS
VEHICLE SPEED SENSOR (INSTALLED
ON THE TRANSMISSION)
The speed sensor is installed on the rear portion of the
transmission.
The number of pulses generated is four pulses per one rotation
of the pinion shaft.
Vehicle Speed Sensor Inspection
1. Connect the vehicle speed sensor connector 1
E44
to the
battery (+) terminal and 2
E44
to the (-) terminal.
2. Connect a resistance of 1.3K ohm to 5K ohm (1/4 W or
more) between connectors 1
E44
and 3
E44
CAUTION:
Be extremely careful not to connect the battery (+)
terminal to the connector 3
E44
.
This may damage the vehicle speed sensor.
3. Rotate the shaft of the vehicle speed sensor slowly and
measure the voltage at the both ends with a digital tester.
The voltage, with one rotation of shaft fluctuates four times in
the following range: 10 to 14V - 2V or less.
ELECTRICAL-BODY AND CHASSIS 8A-371
HEATER AND AIR CONDITIONING
PARTS LOCATION (RHD)
RTW78AXF039101& RTW78AXF045301
8A-372 ELECTRICAL-BODY AND CHASSIS
PARTS LOCATION (LHD)
RTW78AXF039201 & RTW78AXF045401
ELECTRICAL-BODY AND CHASSIS 8A-373
PARTS LOCATION C24SE
C56
E60
To E6, E7, E8, E9
E70
E72
H34
To E64, E75
To E18
E84
To E66
E59
E69
E2
To E85
E65
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст