Nissan Almera Tino V10. Manual — part 178
AT-436
[ALL]
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
PFP:00000
Manual Shaft
ECS009CH
COMPONENTS
REMOVAL
1.
Remove detent spring from transmission case.
2.
Drive out manual plate retaining pin.
SAT481J
SAT313G
AAT486
REPAIR FOR COMPONENT PARTS
AT-437
[ALL]
D
E
F
G
H
I
J
K
L
M
A
B
AT
3.
Drive and pull out parking rod plate retaining pin.
4.
Remove parking rod plate from manual shaft.
5.
Draw out parking rod from transmission case.
6.
Pull out manual shaft retaining pin.
7.
Remove manual shaft and manual plate from transmission case.
8.
Remove manual shaft oil seal.
INSPECTION
●
Check component parts for wear or damage. Replace if necessary.
INSTALLATION
1.
Install manual shaft oil seal.
●
Apply ATF to outer surface of oil seal.
AAT534
SAT049F
SAT080D
SAT081D
AT-438
[ALL]
REPAIR FOR COMPONENT PARTS
2.
Install manual shaft and manual plate.
3.
Align groove of manual shaft and hole of transmission case.
4.
Install manual shaft retaining pin.
5.
Install parking rod to parking rod plate.
6.
Set parking rod assembly onto manual shaft.
7.
Drive manual plate retaining pin and parking rod plate retaining
pin.
●
Both ends of pin should protrude.
8.
Install detent spring.
SAT610H
AAT487
SAT078D
AAT485
SAT313G
REPAIR FOR COMPONENT PARTS
AT-439
[ALL]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Oil Pump
ECS009CI
COMPONENTS
DISASSEMBLY
1.
Remove seal rings.
2.
Loosen bolts in a crisscross pattern and remove oil pump cover.
3.
Remove inner and outer gear from oil pump housing.
SAT931J
SAT699H
SAT091D
SAT092D
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст