Nissan Almera Tino V10. Manual — part 88
AT-76
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
12. After finishing cruise test part 1, touch “STOP”.
13. Touch “STORE” and touch “BACK”.
14. Touch “DISPLAY”.
15. Touch “PRINT”.
16. Check the monitor data printed out.
17. Continue cruise test part 2 and 3.
SAT135K
SAT987J
SAT974J
SAT975J
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-77
[EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
Without CONSULT-II
●
Throttle position sensor can be checked by voltage across termi-
nals 41 and 42 of TCM.
SCIA0710E
AT-78
[EURO-OBD]
TROUBLE DIAGNOSIS — BASIC INSPECTION
Cruise Test — Part 1
1.
CHECK STARTING GEAR (D
1
) POSITION
1.
Drive vehicle for approx. 10 minutes to warm engine oil and ATF up to operating
temperature.
2.
Park vehicle on flat surface.
3.
Set overdrive control switch to “ON” position.
4.
Move selector lever to “P” position.
5.
Start engine.
6.
Move selector lever to “D” position.
7.
Accelerate vehicle by constantly depressing accelerator pedal
halfway.
8.
Does vehicle start from D
1
?
Read gear position.
Yes or No
Yes
>> GO TO 2
No
>> Go To “8. Vehicle Cannot Be Started From D
1
”,
.
Continue ROAD TEST. Refer to
.
ATF operating temperature: 50 - 80
°
C (122 - 176
°
F)
SAT774B
SAT775B
SAT495G
TROUBLE DIAGNOSIS — BASIC INSPECTION
AT-79
[EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
2.
CHECK SHIFT UP (D
1
TO D
2
)
Does A/T shift from D
1
to D
2
at the specified speed?
Read gear position, throttle opening and vehicle speed.
Yes or No
Yes
>> GO TO 3
No
>> Go To “9. A/T Does Not Shift: D
1
→
D
2
Or Does Not
Kickdown: D
4
→
D
2
”,
. Continue ROAD TEST.
Refer to
.
3.
CHECK SHIFT UP (D
2
TO D
3
)
Does A/T shift from D
2
to D
3
at the specified speed?
Read gear position, throttle position and vehicle speed.
Yes or No
Yes
>> GO TO 4
No
>> Go To “10. A/T Does Not Shift: D
2
→
D
3
”,
.
Continue ROAD TEST. Refer to
.
4.
CHECK SHIFT UP (D
3
TO D
4
)
Does A/T shift from D
3
to D
4
at the specified speed?
Read gear position, throttle position and vehicle speed.
Yes or No
Yes
>> GO TO 5
No
>> Go To “11. A/T Does Not Shift: D
3
→
D
4
”,
.
Continue ROAD TEST. Refer to
.
Specified speed when shifting from D
1
to D
2
:
Refer to
.
SAT954I
Specified speed when shifting from D
2
to D
3
:
Refer to
.
SAT955I
Specified speed when shifting from D
3
to D
4
:
Refer to
.
SAT956I
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст