Nissan Murano Z51. Manual — part 833
HA-48
< REMOVAL AND INSTALLATION >
CONDENSER PIPE ASSEMBLY
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
CONDENSER
HA-49
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
CONDENSER
Exploded View
INFOID:0000000005514552
Removal and Installation
INFOID:0000000005514553
REMOVAL
1.
Remove the condenser pipe assembly. Refer to
2.
Remove the air guide upper and air guide center. Refer to
.
3.
Remove hood lock assembly. Refer to
4.
Disengage the joints of the pawl (A), and then move air guide
side (LH) (1) to the position without the hindrance for work.
1.
Condenser pipe assembly
2.
O-ring
3.
Condenser assembly
4.
Condenser lower bracket LH
5.
Bracket
6.
Liquid tank
7.
Refrigerant pressure sensor
8.
Liquid tank bracket
9.
Condenser upper bracket LH
10. Condenser upper bracket RH
Refer to
JPIIA0460GB
JPIIA1348ZZ
HA-50
< REMOVAL AND INSTALLATION >
CONDENSER
5.
Disconnect the refrigerant pressure sensor connector (A).
6.
Remove the tabs (A). Pull the condenser (1) in the direction
shown by the arrow, and then remove it.
CAUTION:
Be careful not to damage core surface of condenser.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
JPIIA0543ZZ
JPIIA1349ZZ
LIQUID TANK
HA-51
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
LIQUID TANK
Exploded View
INFOID:0000000005514554
Removal and Installation
INFOID:0000000005514555
REMOVAL
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2.
Remove the front grille. Refer to
3.
Clean liquid tank and its surrounding area. Then remove dust and rust from liquid tank.
CAUTION:
Be sure to clean carefully.
4.
Disconnect the refrigerant pressure sensor connector (A).
1.
Condenser pipe assembly
2.
O-ring
3.
Condenser assembly
4.
Condenser lower bracket LH
5.
Bracket
6.
Liquid tank
7.
Refrigerant pressure sensor
8.
Liquid tank bracket
9.
Condenser upper bracket LH
10. Condenser upper bracket RH
Refer to
JPIIA0460GB
JPIIA0543ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст