Nissan Murano Z51. Manual — part 771
EXT-18
< REMOVAL AND INSTALLATION >
REAR BUMPER
9.
Pull to release bumper fascia assembly (1) from bumper side
bracket.
10. Remove bumper fascia assembly.
CAUTION:
When removing bumper fascia assembly, 2 workers are required so as to prevent it from dropping.
11. Remove the following parts after removing rear bumper fascia.
• Bumper side bracket (LH/RH)
Remove bumper side bracket (1) fixing screws (A) (LH/RH),
and then remove bumper side bracket (LH/RH).
• Reflex reflector (LH/RH)
Remove reflex reflector (1) fixing screws (A) (LH/RH), and
then remove reflex reflector (LH/RH).
12. Remove energy absorber.
13. Remove bumper reinforcement mounting nuts (LH/RH), and then remove bumper reinforcement.
14. Remove bumper stay mounting bolts, and then remove bumper stay.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing, perform fitting adjustment.
: Pawl
JMKIA1972ZZ
JMKIA1973ZZ
JMKIA1974ZZ
Portion
Clearance
Rear bumper – Rear fender
A – A
0.0 – 1.0 mm (0.000 – 0.039 in)
Rear bumper – Rear combination lamp
B – B
0.5 – 3.5 mm (0.020 – 0.138 in)
Rear bumper – Back door
C – C
4.0 – 8.0 mm (0.157 – 0.315 in)
Rear bumper – Back door
D – D
5.0 – 9.0 mm (0.197 – 0.354 in)
FRONT GRILLE
EXT-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT GRILLE
Exploded View
INFOID:0000000005516272
Removal and Installation
INFOID:0000000005516273
REMOVAL
1.
Fully open hood assembly.
2.
Remove radiator core support cover LH (1) fixing clips (A), and
then remove radiator core support cover LH.
3.
Remove radiator core support cover RH (2) fixing clips (B), and
then remove radiator core support cover RH.
1.
Radiator core support cover RH
2.
Fastener
3.
Front grille assembly
4.
Front emblem
5.
Radiator core support cover LH
: Pawl
JMKIA1975ZZ
JMKIA1976ZZ
EXT-20
< REMOVAL AND INSTALLATION >
FRONT GRILLE
4.
Remove front grille (1) fixing clips (A).
5.
Disengage fastener (A) of fixing front grille (1) with plier (B).
6.
Pull front grille (1) horizontally toward vehicle front, and then
remove front grille.
7.
Remove the front emblem after removing front grille.
• Remove emblem (1) fixing pawls.
• Remove emblem from front grille (2).
INSTALLATION
Install in the reverse order of removal.
JMKIA1977ZZ
JMKIA1978ZZ
: Pawl
JMKIA1979ZZ
: Pawl
JMKIA1980ZZ
COWL TOP
EXT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
COWL TOP
Exploded View
INFOID:0000000005516274
Removal and Installation
INFOID:0000000005516275
REMOVAL
1.
Fully open hood assembly.
1.
Windshield side molding RH
2.
Cowl top seal
3.
Rubber plug RH
4.
Extension cowl top
5.
Windshield side molding LH
6.
Front wiper arm and blade LH
7.
Front wiper arm and blade RH
8.
Front wiper arm cover RH
9.
Washer nozzle RH
10. Extension cowl top
11. Rubber plug LH
12. Front wiper arm cover LH
13. Washer nozzle LH
14. Cowl top cover
15. Front wiper drive assembly
16. EPT sealer
Refer to
for symbols in the figure.
JMKIA1981GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст