Nissan Murano Z51. Manual — part 772
EXT-22
< REMOVAL AND INSTALLATION >
COWL TOP
2.
Remove front wiper arm blade (LH/RH). Refer to
WW-130, "Removal and Installation"
3.
Remove windshield side molding (1) fixing clips (A) (LH/RH).
4.
Disconnect front washer tube connector (1).
5.
Remove cowl top cover fixing clips.
6.
Pull forward to release cowl top cover (1) from windshield glass.
CAUTION:
When performing the procedure after removing cowl top
cover, cover the lower end of windshield glass with ure-
thane etc.
7.
Remove the following parts after removing cowl top cover.
• Cowl top seal
• Washer nozzle (LH/RH)
• Washer tube
• EPT sealer
8.
Remove front wiper drive assembly. Refer to
WW-134, "Removal and Installation"
.
9.
Remove brake reservoir tank (1) fixing nuts (A).
10. Remove brake fluid level switch harness clips (B).
11. Remove extension cowl top mounting bolts, and then remove extension cowl top.
12. Remove dash lower insulator upper mounting nuts, and then remove dash lower insulator upper.
JMKIA1982ZZ
JMKIA1983ZZ
JMKIA1984ZZ
JMKIA1985ZZ
COWL TOP
EXT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• When installing cowl top cover, check that blind clips are securely fitted in panel holes on body, and
then press them in.
• Always replace cowl top cover EPT sealer on rear of vehicle with a new one when installing old cowl
top cover.
• After installing, perform adjustment of wiper arms. Refer to
EXT-24
< REMOVAL AND INSTALLATION >
FENDER PROTECTOR
FENDER PROTECTOR
FENDER PROTECTOR
FENDER PROTECTOR : Exploded View
INFOID:0000000005516276
FENDER PROTECTOR
FENDER PROTECTOR : Removal and Installation
INFOID:0000000005516277
REMOVAL
1.
Remove front mudguard (LH/RH). Refer to
EXT-26, "Removal and Installation"
.
2.
Remove splash guard fixing clips and then remove splash guard.
3.
Remove front fender protector fixing clips.
4.
Release front fender protector upper fixing clip downward, and then remove front fender protector.
INSTALLATION
Install in the reverse order of removal.
REAR WHEEL HOUSE PROTECTOR
1.
Fender protector
2.
Fender clip
3.
Splash guard
4.
Front fender
JMKIA1986ZZ
FENDER PROTECTOR
EXT-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
REAR WHEEL HOUSE PROTECTOR : Exploded View
INFOID:0000000005516278
REAR WHEEL HOUSE PROTECTOR : Removal and Installation
INFOID:0000000005516279
REMOVAL
1.
Remove rear mudguard. Refer to
EXT-26, "Removal and Installation"
2.
Remove clip (A) of rear bumper fascia (1).
3.
Remove rear wheel house protector fixing clips.
4.
Remove rear wheel house protector fixing plastic nuts and then remove rear wheel house protector.
INSTALLATION
Install in the reverse order of removal.
1.
Rear wheel house protector
JMKIA1987ZZ
JMKIA1988ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст