Nissan Murano Z51. Manual — part 1564
WW-134
< REMOVAL AND INSTALLATION >
FRONT WIPER DRIVE ASSEMBLY
FRONT WIPER DRIVE ASSEMBLY
Exploded View
INFOID:0000000005516062
REMOVAL VIEW
DISASSEMBLY VIEW
Removal and Installation
INFOID:0000000005516063
REMOVAL
1.
Remove front wiper arm. Refer to
2.
Remove cowl top cover. Refer to
.
3.
Remove bolts from the front wiper drive assembly.
1.
Front wiper drive assembly
JPLIA0875ZZ
1.
Front wiper motor
2.
Shaft seal
3.
Front wiper linkage 2
4.
Front wiper frame
5.
Bracket
6.
Front wiper linkage 1
: Multi
−
purpose grease or an equivalent
JPLIA0876ZZ
FRONT WIPER DRIVE ASSEMBLY
WW-135
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
4.
Disconnect the front wiper motor connector.
5.
Remove front wiper drive assembly from the vehicle.
INSTALLATION
1.
Install the front wiper drive assembly to the vehicle.
2.
Connect the front wiper motor connector.
3.
Operate the front wiper to move it to the auto stop position.
4.
Install the cowl top cover. Refer to
5.
Install front wiper arms. Refer to
Disassembly and Assembly
INFOID:0000000005516064
DISASSEMBLY
1.
Remove the front wiper linkage 1 and 2 from the front wiper drive assembly.
CAUTION:
Never bend the linkage or damage the plastic part of the ball joint when removing the front wiper
linkage.
2.
Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front
wiper frame.
ASSEMBLY
1.
Connect the front wiper motor connector.
2.
Operate the front wiper to move it to the auto stop position.
3.
Disconnect the front wiper motor connector.
4.
Install front wiper motor to front wiper frame.
5.
Install the front wiper linkage 2 to the front wiper motor and the front wiper frame.
6.
Install the front wiper linkage 1 to the front wiper frame.
CAUTION:
• Never drop front wiper motor or cause it to come into contact with other parts.
• Be careful for the grease condition at the front wiper motor and front wiper linkage joint
(retainer). Apply multi
−
purpose grease or an equivalent if necessary.
WW-136
< REMOVAL AND INSTALLATION >
RAIN SENSOR
RAIN SENSOR
Exploded View
INFOID:0000000005516065
CAUTION:
When the rain sensor is removed from windshield, the rain sensor cannot be re-used.
REMOVAL
Removal and Installation
INFOID:0000000005516066
REMOVAL
1.
Remove the inside mirror cover (upper and lower).
2.
Disengage the both sides of metal spring clips, and remove the rain sensor from the windshield.
3.
Disconnect rain sensor connector.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
• Surface of windshield should be cleaned.
• Never touch gel/adhesive of new part.
• Lock the metal spring clips and install the rain sensor securely.
1.
Rain sensor connector
2.
Inside mirror cover (upper)
3.
Inside mirror cover (lower)
4.
Rain sensor
A.
Metal spring clip
Refer to
for symbols in the figure.
JPLIA0817ZZ
WIPER AND WASHER SWITCH
WW-137
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
WIPER AND WASHER SWITCH
Exploded View
INFOID:0000000005516067
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст