Nissan Murano Z51. Manual — part 1565
WW-138
< REMOVAL AND INSTALLATION >
REAR WIPER ARM
REAR WIPER ARM
Exploded View
INFOID:0000000005516068
Removal and Installation
INFOID:0000000005516069
REMOVAL
1.
Operate the rear wiper to the auto stop position.
2.
Remove rear wiper arm cover.
3.
Remove the rear wiper arm mounting nut.
4.
Raise rear wiper arm, and remove wiper arm from the vehicle.
INSTALLATION
1.
Clean wiper arm mount as shown in the figure to prevent nut
from being loosened.
2.
Operate the rear wiper motor to the auto stop position.
3.
Adjust the rear wiper blade position. Refer to
4.
Install the rear wiper arm by tightening the mounting nut.
5.
Inject the washer fluid.
6.
Operate the rear wiper to the auto stop position.
7.
Check that the rear wiper blades stop at the specified position.
8.
Install rear wiper arm cover.
Adjustment
INFOID:0000000005516070
REAR WIPER BLADE POSITION ADJUSTMENT
Clearance between the end of back door glass and top of wiper blade center.
1.
Rear wiper blade
2.
Rear wiper motor
3.
Pivot seal
4.
Rear wiper arm
5.
Rear wiper arm cover
Refer to
for symbols in the figure.
JPLIA1428GB
SKIA0082J
REAR WIPER ARM
WW-139
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Standard clearance
L
: 48.8
±
7.5 mm (1.92
±
0.295 in)
JPLIA0966ZZ
WW-140
< REMOVAL AND INSTALLATION >
REAR WIPER MOTOR
REAR WIPER MOTOR
Exploded View
INFOID:0000000005516071
Removal and Installation
INFOID:0000000005516072
REMOVAL
1.
Remove rear wiper arm cover and rear wiper arm. Refer to
.
2.
Remove the back door finisher inner. Refer to
3.
Disconnect the rear wiper motor connector.
4.
Remove the rear wiper motor mounting bolts.
5.
Remove the rear wiper motor from the vehicle.
6.
Remove the pivot seal.
INSTALLATION
1.
Install the pivot seal.
2.
Install the rear wiper motor to the vehicle.
3.
Connect the rear wiper motor connector.
4.
Operate the rear wiper to the auto stop position.
5.
Install the back door finisher inner. Refer to
.
6.
Install rear wiper arm cover and rear wiper arm. Refer to
.
1.
Rear wiper blade
2.
Rear wiper motor
3.
Pivot seal
4.
Rear wiper arm
5.
Rear wiper arm cover
Refer to
for symbols in the figure.
JPLIA1428GB
REAR WASHER NOZZLE AND TUBE
WW-141
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
REAR WASHER NOZZLE AND TUBE
Hydraulic Layout
INFOID:0000000005516073
Removal and Installation
INFOID:0000000005516074
REMOVAL
1.
Remove the high-mounted stop lamp. Refer to
2.
Remove the rear washer tube from the rear washer nozzle.
1.
Rear washer nozzle
2.
Check valve
3.
Rear washer tube
4.
Washer tank
: Clip
: Grommet
JPLIA0879ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст