Nissan Titan A60. Manual — part 663
INTERIOR ROOM LAMP
INL-73
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
1. Using a suitable tool (A), release the pawls and remove the
room lamp lens (1).
: Pawl
2. Remove room lamp screws (2).
3. Disconnect the connector, then remove the room lamp.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement
1. Using a suitable tool, release the pawls and remove the room
lamp lens.
2. Release the room lamp bulb retainers (1), then pull bulb (2)
straight out to remove.
VANITY LAMP (If Equipped)
Removal
The vanity lamp is replaced as part of the sunvisor assembly. Refer to
INT-21, "Removal and Installation"
.
Installation
Installation is in the reverse order of removal.
Bulb or Lens Replacement
ALLIA0325ZZ
Room lamp bulb
: 12V - 6W
ALLIA0326ZZ
INL-74
< REMOVAL AND INSTALLATION >
INTERIOR ROOM LAMP
1. Using a suitable tool (A), release the tabs and remove the vanity
lamp lens (1).
: Pawl
CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing
and lens.
2. Release one side of the bulb (2) from the tab, then pull straight
out to remove.
STEP LAMP (If Equipped)
Removal
1. Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.
CAUTION:
Wrap a cloth around the suitable tool to protect door finisher and lens.
2. Disconnect the step lamp connector, then remove step lamp.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.
Vanity lamp bulb
: 12V - 1.8W
ALLIA0320ZZ
ALLIA0013ZZ
1.
Step lamp connector
2.
Door finisher
3.
Step lamp lens/socket
4.
Step lamp bulb
Vehicle front
INTERIOR ROOM LAMP
INL-75
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
PERSONAL LAMP (If Equipped)
Removal
1. Remove the rear roof console. Refer to
.
2. Remove personal lamp screws (3).
3. Disconnect personal lamp electrical connectors (1), then
remove personal lamp (2) from the rear roof console.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Using a suitable tool (A), release the pawls and remove per-
sonal lamp lens (1).
: Pawl
CAUTION:
Wrap a cloth around suitable tool (A) to protect the housing
and lens (1).
2. Pull bulb (2) straight out to remove.
FOOT LAMP (If Equipped)
Removal
Rotate foot lamp socket (3) counterclockwise to remove from
bracket.
• Bulb shield (1)
• Bulb (2)
Installation
Step lamp bulb
: 12V - 3.8W
ALLIA0322ZZ
Personal lamp bulb
: 12V - 8W
ALLIA0323ZZ
ALLIA0324ZZ
INL-76
< REMOVAL AND INSTALLATION >
INTERIOR ROOM LAMP
Installation is in the reverse order of removal.
Bulb Replacement
1. Release the pawls and remove bulb shield (1) from bracket.
2. Pull bulb (2) straight out from foot lamp socket (3) to remove.
Foot lamp bulb
: 12V - 3.4W
ALLIA0324ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст