Nissan Rogue. Manual — part 916
MWI
SYSTEM
MWI-11
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SPEEDOMETER
Information display
Current fuel consumption
The last result calculated during normal condition is indicated.
Average fuel consumption
Average vehicle speed
Range (Distance to empty)
Driving distance
Door open warning
The display turns OFF by suspending communication.
Lift gate open warning
Low tire pressure warning
Parking brake release warning
Fuel filler cap warning
Oil pressure warning
CVT warning
BSW/LDW warning
Odo/trip meter
An indicated value is maintained at communications blackout.
Shift position indicator
The indicator turns OFF by suspending communication.
Warning lamp/indicator lamp
ABS warning lamp
Turns ON by suspending communication.
Brake warning lamp
EPS warning lamp
VDC warning lamp
AWD warning lamp
Malfunction indicator lamp
Airbag warning lamp
Charge warning lamp
VDC OFF indicator lamp
Turns OFF by suspending communication.
SPORT mode indicator lamp
AWD LOCK indicator lamp
High beam indicator lamp
Turn signal indicator lamp
Position lamp indicator lamp
OD OFF indicator lamp
BSW indicator lamp
LDW indicator lamp
ECO mode indicator lamp
Front fog lamp indicator lamp
Hill descent control indicator lamp
Low tire pressure warning lamp
After blinking for 1 minute, the lamp remains ON.
Function
Specifications
MWI-12
< SYSTEM DESCRIPTION >
SYSTEM
SPEEDOMETER : System Description
INFOID:0000000011279778
SYSTEM DIAGRAM
DESCRIPTION
The ABS actuator and electric unit (control unit) receives each wheel speed sensor signal and provides a vehi-
cle speed signal to the combination meter via CAN communication lines.
TACHOMETER
TACHOMETER : System Description
INFOID:0000000011279779
SYSTEM DIAGRAM
DESCRIPTION
The crank position sensor sends a crankshaft position signal to the ECM. The ECM provides an engine speed
signal to the combination meter via CAN communication lines. The tachometer indicates engine speed in rev-
olutions per minute (rpm).
ENGINE COOLANT TEMPERATURE GAUGE
ENGINE COOLANT TEMPERATURE GAUGE : System Description
INFOID:0000000011279780
SYSTEM DIAGRAM
DESCRIPTION
The engine coolant temperature sensor sends an engine coolant temperature signal to the ECM. The ECM-
provides an engine coolant temperature signal to the combination meter via CAN communication lines. The
engine coolant temperature gauge indicates the engine coolant temperature.
FUEL GAUGE
JSNIA2973GB
JSNIA2974GB
JSNIA3015GB
MWI
SYSTEM
MWI-13
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
FUEL GAUGE : System Description
INFOID:0000000011279781
SYSTEM DIAGRAM
DESCRIPTION
The fuel level sensor unit sends a variable resistor signal to the combination meter. The fuel gauge indicates
the approximate fuel level in the fuel tank.
METER ILLUMINATION CONTROL
METER ILLUMINATION CONTROL : System Description
INFOID:0000000011279782
SYSTEM DIAGRAM
DESCRIPTION
Meter Illumination Control Function
The operation of the illumination control switch changes brightness of the meter illumination.
METER EFFECT FUNCTION
METER EFFECT FUNCTION : System Description
INFOID:0000000011279783
SYSTEM DIAGRAM
ENGINE-START EFFECT FUNCTION
When recognizing an engine start, the combination meter controls the following items for producing the effect:
• Speedometer
JSNIA3055GB
AWNIA2548GB
Meter illumination
The number of adjustable steps
Daytime
21 step
Nighttime
21 step
JSNIA6076GB
MWI-14
< SYSTEM DESCRIPTION >
SYSTEM
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
• Meter illumination
Meter and Illumination Operations During Engine-start Effect
The combination meter controls the following items during the engine-start effect.
NOTE:
The pointers are stopped and illumination is turned off while cranking the engine.
Engine Start Judgement
The combination meter judges “engine-start” and activates the engine-start effect only once when the follow-
ing operational conditions are all satisfied.
NOTE:
Engine-start effect exits when any of the above operational conditions is cancelled during the engine-start
effect.
INFORMATION DISPLAY
Control item
Operation
Speedometer
Sweeps the pointer.
Tachometer
Sweeps the pointer.
Engine coolant temperature gauge
Stops the pointer.
Fuel gauge
Stops the pointer.
Meter illumination
Pointers
Turns on the illumination at the effect level.
Information display
Turns on the illumination at the normal brightness level.
Other than those above
Increases the brightness to the effect level in stages.
Condition
Ignition switch
ON position.
Vehicle speed
Less than 0.6 MPH (1 km/h).
Engine state
Other than the time of cranking the engine.
500 rpm or more.
Information display
(SETTING)
The setting of “EFFECT” is “ON.”
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст