Nissan Rogue. Manual — part 915
MWI
COMPONENT PARTS
MWI-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
METER SYSTEM : Design
INFOID:0000000011279775
ARRANGEMENT OF COMBINATION METER
7.
BCM
• Transmits each signal to the combination meter via CAN communication.
MWI-8, "METER SYSTEM : System Description"
.
• Refer to
BCS-7, "BODY CONTROL SYSTEM : Component Parts Location"
(with Intelligent Key
system) or
BCS-79, "BODY CONTROL SYSTEM : Component Parts Location"
(without Intelli-
gent Key system) for detailed installation location.
8.
Meter control switch
Refer to
MWI-18, "Switch Name and Function"
.
9.
Steering switches
Refer to
MWI-18, "Switch Name and Function"
.
10.
Combination meter
Refer to
MWI-8, "METER SYSTEM : System Description"
.
11.
Parking brake switch
Transmits the parking brake switch signal to the combination meter.
12.
Fuel level sensor unit (sub) Transmits the fuel level sensor signal to the combination meter.
13.
Fuel level sensor unit
(main)
Transmits the fuel level sensor signal to the combination meter.
14.
Engine oil pressure sensor
Transmits the engine oil pressure sensor signal to the ECM.
No.
Component
Function
U:
USA
EU: Except USA
AWNIA3716ZZ
MWI-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
METER SYSTEM
METER SYSTEM : System Description
INFOID:0000000011279776
SYSTEM DIAGRAM
Combination Meter Input Signal (CAN Communication Signal)
AWNIA3718GB
Transmit unit
Signal name
ABS actuator and electric unit (control unit)
Vehicle speed signal
ABS warning lamp signal
VDC warning lamp signal
VDC OFF indicator lamp signal
Brake warning lamp signal
MWI
SYSTEM
MWI-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
DESCRIPTION
Combination Meter
• The combination meter controls the following items according to the signals received from each unit via CAN
communication and the signals from switches and sensors:
- Measuring instruments
• Speedometer
• Tachometer
• Engine coolant temperature gauge
• Fuel gauge
- Warning lamps
- Indicator lamps
- Meter illumination control
- Meter effect function
- Information display
• The combination meter incorporates a buzzer function that sounds an audible alarm with the integrated
buzzer. Refer to
WCS-6, "WARNING CHIME SYSTEM : System Description"
for further details.
• The combination meter includes an on board diagnosis function.
• The combination meter can be diagnosed with CONSULT.
METER CONTROL FUNCTION LIST
BCM
Dimmer signal
Position light request signal
Door switch signal
Front fog light request signal
High beam request signal
Meter display signal
Sleep wake up signal
Buzzer output signal
Tire pressure data signal
Key ID signal
Turn indicator signal
TPMS malfunction warning lamp signal
Starter relay status signal
Low tire pressure warning lamp signal
TCM
Shift position signal
CVT warning lamp signal
OD OFF indicator signal
ECM
Engine speed signal
ASCD status signal
Engine coolant temperature signal
Fuel consumption monitor signal
Malfunctioning indicator lamp signal
Engine status signal
Engine oil pressure sensor signal
Fuel filler cap warning display signal
SPORT mode indicator signal
ECO mode indicator signal
AWD control unit
AWD warning lamp signal
Transmit unit
Signal name
MWI-10
< SYSTEM DESCRIPTION >
SYSTEM
METER SYSTEM : Fail-safe
INFOID:0000000011406184
The combination meter activates the fail-safe control if the CAN communication lines between each unit are
malfunctioning.
System
Description
Reference
Measuring in-
struments
Speedometer
Indicates vehicle speed.
MWI-12,
"SPEEDOME-
TER : System
Description"
Tachometer
Indicates engine speed.
MWI-12, "TA-
CHOMETER :
System Descrip-
tion"
Engine coolant temperature gauge
Indicates engine coolant temperature.
MWI-12, "EN-
GINE COOLANT
TEMPERA-
TURE GAUGE :
System Descrip-
tion"
Fuel gauge
Indicates fuel level.
MWI-13, "FUEL
GAUGE : Sys-
tem Description"
Information display
The Information display displays status, according to
system malfunction or vehicle condition.
MWI-15, "IN-
FORMATION
DISPLAY : Sys-
tem Description"
Meter illumina-
tion control
Meter illumination control function
Switches back and forth between daytime mode and
nighttime mode, according to a light switch position.
MWI-13,
"METER ILLU-
MINATION
CONTROL :
System Descrip-
tion"
Back light illumination control function
The operation of the illumination control switch al-
lows the brightness adjustment of meter illumination.
Meter effect
function
Engine-start effect function
Controls pointers of combination meter, back light il-
lumination and information display at engine start to
produce illumination effects.
MWI-13,
"METER EF-
FECT FUNC-
TION : System
Description"
Driver welcome function
Controls meter illumination to produce illumination
effects when getting in the vehicle.
Function
Specifications
Speedometer
Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge
Meter illumination control
When suspending communication, changes to nighttime mode.
Buzzer
Turns OFF by suspending communication.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст